SSI
SSI is a leading car parts brand known for delivering premium quality components. Our specialisation lies in providing top-notch parts exclusively designed for Porsche vehicles. With a commitment to excellence, we ensure that every SSI part meets the highest standards, offering optimal performance and durability for every Porsche part.
The SSI range is iconic – the old traditional brand from California has been manufactured by JP Group Automotive in Denmark since 2013. Focus on keeping the very highest standards remains in every step of the manufacturing process.
Fits:
Porsche 911 Carrera 3.2 08/83-07/89
Porsche 911 SC/911 Carrera 2.7-3.0 08/75-07/83
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1621702010
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.
Price is for a SET OF 2
Fits:
Porsche 911 (Conversion) 3.2ltr 08/1983 - 07/1989
Core Length: 470 mm
Core Width: 760 mm
Core Depth: 380 mm
Outer diameter: 41 mm
LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.
HIGHER POWER OUTPUTOutput is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.
CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the by products of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1623106810
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Are you carrying out an engine swap to fit a 964 / 993 3.6ltr to an early 911?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.
IMPORTANT: Major modification needed on engine tin ware when installing on 3,6ltr engines.
Price is for a SET OF 2
Fits:
Porsche 911 (Conversion) 3.6ltr 01/1963 - 07/1989
Core Length: 470 mm
Core Width: 750 mm
Core Depth: 370 mm
Outer diameter: 41 mm
LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.
HIGHER POWER OUTPUTOutput is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.
CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1623107110
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Improve exhaust gas flow using these "big bore" SSi heat exchangers and GT3 style exhaust silencer/muffler
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.
Fits:
Porsche 911 2.0ltr -2.4ltr 01/1963-07/1973
Porsche 911 2.7L-3.0ltr 08/1973-10/1983
Porsche 914/6 2.0ltr 11/1969-12/1973
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1620802010
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Improve exhaust gas flow using these "big bore" SSi heat exchangers and Racing exhaust silencer/muffler
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.
Fits:
Porsche 911 2.7ltr -3.0ltr 08/1973-10/1983
Porsche 911 S (mech. injection) 2.4ltr 08/1971-07/1973
Porsche 911 T/E/S (not mech. injection) 2.0ltr -2.4ltr 01/1963-12/1973
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1620801910
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Improve exhaust gas flow using these "big bore" SSi heat exchangers.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.
Fits:
Porsche 911 (carb.) Europe 2.0ltr 01/63-07/73
Porsche 911 (carb.) USA 2.0ltr -2.4ltr 08/65-07/71
Porsche 911 (inj.) Europe 2.0ltr - 2.4ltr 08/68-07/71
Porsche 911 (inj.) USA 2.0ltr -2.4ltr 08/68-07/71
Porsche 911 Europe 2.7ltr 08/73-07/75
Porsche 911 Europe 3.0ltr 08/77-07/83
Porsche 911 USA Federal 2.7ltr 08/74-07/75
Porsche 911 USA Federal 3.0ltr 08/77-07/78
Price is for a SET OF 2
LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.
HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.
CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133091911SSI41
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
With TÜV/EEC approval
Fits:
Porsche 911 S (mech. injection) 2.4 08/71-07/73
Porsche 911 T/E/S (not mech.injection) 2.0-2.4 01/63-07/73
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91111102505
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 Carrera Sport 3.2L 08/1983-07/1989
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1620611600
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 911 2.0-2.4L 01/1963-07/1973
Porsche 914/6 2.0L 11/1969-12/1973
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1620612400
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 S (mech. injection) 2.4L 08/1971-07/1973
Porsche 911 T/E/S (not mech.injection) 2.0L-2.4L 01/1963-12/1973
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1620801800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Price is for a SET OF 2
Made by SSI
Fits: USA MODELS
PORSCHE 911 07/77 - 06/80 3.0L Petrol 180bhp 930.03, 930.13
PORSCHE 911 09/79 - 06/80 3.0L Petrol 188bhp 930.09, 930.19
PORSCHE 911 08/80 - 07/83 3.0L Petrol 204bhp 930.10
PORSCHE 911 03/74 - 10/83 3.0L Petrol 209bhp From 1979/08, To 1983/07
LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.
CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1623105110
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 Carrera 3.2L 08/83-07/89
Porsche 911 SC / 911 Carrera 2.7L-3.0L 08/75-07/83
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1620611800
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Price is for a SET OF 2
Are you carrying out an engine swap to fit a 964/993 3.6ltr to an early 911?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the side and centre silencers and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Fits:
Porsche 911 1964-89
Porsche 911 fitted with 964 or 993 3.6L Engine
LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.
HIGHER POWER OUTPUTOutput is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.
CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133091936SSI
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
STAINLESS STEEL type 321, Matt finish
Fits:
Porsche 914/4 2.0L 1972-75
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1623105410
The product you are viewing cross references to these numbers
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
STAINLESS STEEL type 321, Matt finish
Fits:
Porsche 914/4 1.7L-1.8L 1969-75
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1623105510
The product you are viewing cross references to these numbers
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Fits:
Porsche 911 2.7L-3.3 08/1973-07/1986
Click 'Zoom in' for large parts diagram.
Diagram ref 20.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91165911901
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Fits:
Porsche 911 3.2L Conversion SSI
*Oil pipes 91110772910 and 91110773910 are also required also see our exhaust packages
Modification is needed on the engine tinware when installing on 3.2ltr engines.
LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.
HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.
CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133091917SSI
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Price is for a SET OF 2
Fits:
911 (inj.) Europe 2.4L 08/71-07/73
911 (inj.) USA 2.2L-2.4L 08/71-07/73
911 Carrera Europe 2.7L 08/73-07/75
LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.
HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.
CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133091913SSI
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Replace the rusty, steel heat exchangers with these high quality stainless steel SSi units.
Made using AISI 321/EN4531 titanium stabilized stainless steel, these heat exchangers offer long life, increased power output and a quality fit.
Price is for a SET OF 2
Fits:
K-jet (none mechanical injection engines)
911 (carb.) Europe 2.0L 01/63-07/73
911 (carb.) USA 2.0L-2.4L 08/65-07/71
911 (inj.) Europe 2.0L-2.4L 08/68-07/71
911 (inj.) USA 2.0L-2.4L 08/68-07/71
911 Europe 2.7L 08/73-07/75
911 Europe 3.0L 08/77-07/83
911 USA Federal 2.7L 08/74-07/75
911 USA Federal 3.0L 08/77-07/78
LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel the expected life in the severest road conditions (salt) is 20-30 years.
HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.
CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133091911SSI
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC