Zoom In

Shock Absorber Supporting Mount.
Front

Genuine Porsche product.

Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>
Porsche 996 C2 1998-05 (without sport suspension)
Porsche 997 MKI C2 / C2S 2005-08
Porsche 997 MKII C2 / C2S 2009>>

Diagram ref no 3

Zoom In

Shock Absorber Support Ring.
Front

Genuine Porsche product

Fits:
Porsche 996 C4 / C4S 1998-05
Porsche 996 Turbo
Porsche 997 C4 / C4S 2007>> (MKI and MKII)
Porsche 997 Turbo 2007>> (MKI and MKII)

Diagram ref no 10

Zoom In

Shock Absorber Angular-Contact Bearing.
Front

Genuine Porsche product

Fits:
Porsche 996 C4 / C4S 1998-05
Porsche 996 Turbo
Porsche 997 C4 / C4S 2007>> (MKI and MKII)
Porsche 997 Turbo 2007>> (MKI and MKII)

Diagram ref no 11

Zoom In

Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire’s contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennline’s sealed camber plates incorporate FK motorsports spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts. Comes as a set of two. Why are Rennline’s strut mounts the best ?

* Drastically increased bearing life due to the integrated factory GT3 weather seals.
* FK Motorsport Teflon-lined spherical bearings.
* Rigid bearing mount, not clipped in like some products available.
* Specially machined upper nut to allow clearance for maximum negative camber settings.
* Allows for up to 1.25 degrees of added negative camber.
* Special tool included to hold strut shaft from turning when tightening upper nut.
* Can be used with all factory and aftermarket struts, Including factory non adjustable units.
* Webbed machined base for light weight and superior strength.
* Fully rebuildable
* CNC machined 6061 anodized aluminum construction with stainless steel hardware.

Fits
Porsche 997 2 wheel drive
Porsche Boxster 987
Porsche Cayman

Note: When using factory non adjustable struts with factory spring seats, weather seal must be remove

Zoom In

Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats. The 996 version of these mounts are the aftermarket rear mounts that have been exclusively certified for 996 Spec racing. Also available with 14mm adaptor spacers to fit JRZ shocks. Please inquire.

Fits
Porsche 997 C2/C4

Zoom In

Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats. The 996 version of these mounts are the aftermarket rear mounts that have been exclusively certified for 996 Spec racing. Also available with 14mm adaptor spacers to fit JRZ shocks. Please inquire.

Fits
Porsche 997 C2/C4

Zoom In

Groove Ball Bearing.
Front

Genuine Porsche product

Fits:
Porsche 996 1998-05 C2 / C2S
Porsche 997 MKI 2005-08
Porsche 997 MKII 2009-10
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>>
Porsche 987C Cayman 2005>>

Diagram ref no 11

Zoom In

Shock Absorber Compensating Plate.
Front.

Genuine Porsche product

Fits:
Porsche 996 1998-05
Porsche 997 MKI 2005-08
Porsche 997 MKII 2009-10
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>>
Porsche 987C Cayman 2005>>

Options:
- 3.0 mm
- 6.5 mm
Please select below

Diagram ref no 5

Zoom In

Additional Spring.
Front

Genuine Porsche product

Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987 MKII Boxster 2009>>
Porsche 987C Cayman 2005-08
Porsche 987C MKII Cayman 2009>>
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 Turbo 2001-05
Porsche 997 MKI C2 / C4 / C2S / C4S 2005-08
Porsche 997 Turbo 2007>>
Porsche 997 MKII C2 / C4 / C2S / C4S 2009>>

Diagram ref no 9

Zoom In

Shock Absorber Strut Support Ring.
Front

Genuine Porsche product

Fits:
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 997 MKI Carrera 2005-08
Porsche 997 MKII Carrera 2009-10
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987 MKII Boxster 2009>>
Porsche 987C Cayman 2005-08
Porsche 987C MKII Cayman 2009>>

Diagram ref no 4

Zoom In

Shock Absorber Strut Bellow.
Front

Genuine Porsche product

Fits:
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 997 MKI Carrera 2005-08
Porsche 997 MKII Carrera 2009-10
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987 MKII Boxster 2009>>
Porsche 987C Cayman 2005-08
Porsche 987C MKII Cayman 2009>>

Diagram ref no 8