Porsche Classic Motor oil

Porsche Classic Motoroil 10W-60 for the 911 from a displacement of 3.0 litres.

Starting from the 3.0-litre engine with dry-sump lubrication, the flat-six engines of the 911 are more suited to fully synthetic oils. They allow air-cooled engines to reap all the benefits of technological advances in oils. Porsche Classic's 10W-60 version is an absolute ultra-high-performance oil. Its viscosity guarantees optimum lubrication behaviour, both during cold starts and in a hot engine at full throttle. The fully synthetic PAO-based (polyalphaolefin) oil also has excellent properties in terms of evaporation loss, HTHS and shear stability. Anyone venturing onto a race track in a 911 would also be well advised to use the 10W-60 oil, since it cares for and cleans the engine. For example, the additives ensure that the flow of oil reliably transports particles and contaminants to the oil filter.

The oil change intervals for individual vehicle and engine types can be found in the relevant driver's manuals. Engine oil should be changed once a year regardless of distance travelled, since short trips can have a particularly adverse impact on oil. Frequent cold starts mean that increased quantities of fuel, combustion products and moisture enter the oil. This is compounded by the fact that the engine never heats up properly and hence the by-products cannot evaporate. Your first port of call for an oil change should be a Porsche Centre. This is where customers can purchase the Porsche Classic Motoroil in one or five-litre containers. It's worth mentioning in passing that the container itself is a real eye-catcher, designed by the Porsche designers in the Development Centre in Weissach.

Matching oil filters are of course also available from every Porsche Partner in addition to the Porsche Classic Motoroil.

And if you're going to be using original Porsche oil in your original Porsche, you're going to need an oil change label in the engine compartment. Porsche Classic has designed one to match.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

000043209

The product you are viewing cross references to these numbers

Adapter for 20L cans Porsche Classic Motoroil

Connecting pieces of plastic used for the 20 liter container of the Porsche Classic Motor Oil 20-W50 and W60-10. Facilitates filling from the canister into other containers, tanks and the like.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004320990

The product you are viewing cross references to these numbers

The Porsche Classic oil bag (dimensions: 30x20x7cm) is used to store and transport a 1L Classic oil can.



The scope of delivery includes all accessories needed to fill the oil. This includes a filler neck, disposable gloves as well as a Porsche Classic cleaning cloth.

The bag is delivered without oil.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04320900

The product you are viewing cross references to these numbers

Porsche Classic Motoroil 10W50 Embossed metal plate. Format 400x280mm.



For installation in:
Porsche 356
Porsche 914 / 924 / 944 / 928 / 968
Porsche 911 / 964 / 993 / 996
Porsche 986 Boxster
Porsche Carrera GT

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04301050

The product you are viewing cross references to these numbers

Porsche Classic Motoroil 10W60 Embossed metal plate. Format 400x280mm.



For installation in:
Porsche 356
Porsche 914 / 924 / 944 / 928 / 968
Porsche 911 / 964 / 993 / 996
Porsche 986 Boxster
Porsche Carrera GT

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04301060

The product you are viewing cross references to these numbers

Porsche Classic Motoroil 20W50 Embossed metal plate. Format 400x280mm.



For installation in:
Porsche 356
Porsche 914 / 924 / 944 / 928 / 968
Porsche 911 / 964 / 993 / 996
Porsche 986 Boxster
Porsche Carrera GT

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04302050

The product you are viewing cross references to these numbers

Porsche Classic Motoroil 5W50 Embossed metal plate. Format 400x280mm.



For installation in:
Porsche 356
Porsche 914 / 924 / 944 / 928 / 968
Porsche 911 / 964 / 993 / 996
Porsche 986 Boxster
Porsche Carrera GT

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04300550

The product you are viewing cross references to these numbers

Porsche Manual Transmission oil SAE 75W-90 1Litre



Porsche Classic Manual Transmission Oil (75W-90 GL-5) is a high-performance oil suitable for heavy-duty transmissions in 924, 928, 944 and 968 vehicles, as well as for the transmissions fitted in all classic 911 models (up to type 996) and in the Porsche Boxster, type 986.

Thanks to synthesis technology, the oil has outstanding properties, including high-pressure resistance, shear stability and lubricity at extreme temperatures. The oil also enables optimal synchronisation and reduces component wear.

Only for vehicles with manual transmission.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04321052

The product you are viewing cross references to these numbers

Porsche Classic Motoroil 20W-50

For all 356, 914 and 911 models up to the 2.7-litre G-Model, Porsche recommends the multi-grade version with a viscosity of 20W-50.

Please Note: When buying 20LTR can you will also need an adaptor Part No 00004320990

Back in the 1950s, 1960s and 1970s, engines were built with much more generous tolerances than today, which is why the viscosity of an oil must be low enough for it to penetrate into all areas of the engine as quickly and uniformly as possible during cold starts. At the same time, however, its viscosity must not be so low that a stable lubricating film is no longer present when the engine heats up. The developers went to particular lengths to achieve excellent cold start properties for the oil, so that the engine can be lubricated as quickly as possible when started. The CCS test was especially important in this respect, since it simulates the behaviour of the oil in the crankshaft bearing during cold starts and at low temperatures.

The Porsche Classic 20W-50 is a mineral oil known as a hydrocracked base oil with mildly alloyed additives. Hydrocracked base oils are characterised by a very low level of contaminants, a very low sulphur content and very good oxidation and ageing stability, which prevents deposits, for example. At the same time, the Porsche Classic Motoroil 20W-50 has an extremely high HTHS viscosity (High Temperature, High Shear), which describes the quality of the engine oil at high temperatures (150 °C) in the lubricating gap and with high shear rate (engine speeds). Finally, the excellent shear stability ensures that the optimum lubricating properties are reliably retained at high engine temperatures, even after long periods of operation and under high loads.

In a nutshell: low levels of deposits (at both hot and cold temperatures), optimum care for classic engines and excellent compatibility with the special materials found in these engines such as cork seals or leaded bearing shells.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

000043209

The product you are viewing cross references to these numbers

Porsche Classic Motoroil 20W-50.
60L Barrel



For all 356, 914 and 911 models up to the 2.7-litre G-Model, Porsche recommends the multi-grade version with a viscosity of 20W-50.

Back in the 1950s, 1960s and 1970s, engines were built with much more generous tolerances than today, which is why the viscosity of an oil must be low enough for it to penetrate into all areas of the engine as quickly and uniformly as possible during cold starts. At the same time, however, its viscosity must not be so low that a stable lubricating film is no longer present when the engine heats up. The developers went to particular lengths to achieve excellent cold start properties for the oil, so that the engine can be lubricated as quickly as possible when started. The CCS test was especially important in this respect, since it simulates the behaviour of the oil in the crankshaft bearing during cold starts and at low temperatures.

The Porsche Classic 20W-50 is a mineral oil known as a hydrocracked base oil with mildly alloyed additives. Hydrocracked base oils are characterised by a very low level of contaminants, a very low sulphur content and very good oxidation and ageing stability, which prevents deposits, for example. At the same time, the Porsche Classic Motoroil 20W-50 has an extremely high HTHS viscosity (High Temperature, High Shear), which describes the quality of the engine oil at high temperatures (150 °C) in the lubricating gap and with high shear rate (engine speeds). Finally, the excellent shear stability ensures that the optimum lubricating properties are reliably retained at high engine temperatures, even after long periods of operation and under high loads.

In a nutshell: low levels of deposits (at both hot and cold temperatures), optimum care for classic engines and excellent compatibility with the special materials found in these engines such as cork seals or leaded bearing shells.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04321090

The product you are viewing cross references to these numbers

Porsche Classic Oil Type Sticker For Engine Compartment 20W-50.

Fits:
Porsche 356
Porsche 914
Porsche 911 2.0-2.7L

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG04320005

The product you are viewing cross references to these numbers