Performance Plenum

The second generation 957 Cayenne Turbo received multiple upgrades across the entire platform, including an increase of 50 horsepower. This already impressive power output can be further increase by simply bolting on the IPD Cayenne Turbo plenum.
The IPD Cayenne Plenum provides power by means of a superior design that increases air speed, boost response and performance. This is achieved with larger inlets and better diversion areas. The cast aluminum construction can also withstand higher pressures and heat levels. The factory plastic intake is very prone to cracking, especially with Cayenne Turbos producing higher boost levels.

The improved design of the IPD Cayenne Turbo Plenum installs easily and delivers additional horsepower that will make your Cayenne Turbo even more menacing.

The new Cayenne Turbo Plenum delivers up to 30 horsepower and 32 foot pounds of torque giving your Cayenne an improved boost in engine power and driving performance.

The superior design of the IPD Cayenne Turbo plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve.

The 957 Turbo utilizes the factory 76mm throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.


Fits:
Porsche 957 Cayenne Turbo 2007-10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

57276

The product you are viewing cross references to these numbers

Aluminum Intake Plenum

Fits:
Porsche 957 Cayenne Turbo S 2009

The new Cayenne Turbo S comes equipped with a larger 82mm throttle body. The IPD Plenum fits this larger throttle body and delivers an additional 30+ horsepower and 32+ foot pounds of torque providing your Cayenne Turbo S with an improved boost in engine power and driving performance.

The superior design of the IPD Cayenne Turbo S plenum not only increases power but also improves boost response creating a longer, stronger, more linear and of course more pleasurable power curve. The Turbo S Plenum has been specially machined to accept the larger factory 82mm throttle body.

The 957 Turbo S utilizes the factory throttle body and hardware making installation quick and easy although IPD strongly recommends a qualified Porsche technician perform any Plenum installs.

Throttle Body 82mm for Porsche



Fits:
Porsche 918 Spyder 2015 (requires 2 per engine)
Porsche 957 Cayenne GTS 4.8L (engine 48.01+)
Porsche 958 Cayenne S / GTS 4.8L (engine code 48.52)
Porsche 970 Panamera S/ GTS 4.8L (engine codes  48.20 / 48.40 / CXPA / CXRA / CXR)
Porsche 991.1 Carrera C2 / C2S / C4 / C4S
Porsche 997.2 Carrera C2 / C2S / C4 / C4S 3.6L & 3.8L engines
Porsche 997 GT3 3.8L 2007 >> (engines 97.76)
Porsche 997 GT3 3.8L & 4.0L 2009 >> (engines 97.74 / 97.77)
Porsche 997 GT3 3.8L 2007 >> (engines 97.76)
Porsche 991 GT3 / R 3.8L & 4.0L (engines A175 / DGG / DGA / DGGB)
Not for GT3 RS

Will also fit to many other Porsches fitted with oversized 82mm IPD plenums.

In fuel injected engines, the throttle body is the part of the air intake system that controls the amount of air flowing into the engine, in response to driver accelerator pedal input in the main. The throttle body is usually located between the air filter box and the intake manifold, and it is usually attached to, or near, the mass airflow sensor.

The largest piece inside the throttle body is the throttle plate, which is a butterfly valve that regulates the airflow. Have a larger diameter throttle body produces more air flow with equals more power. The upgrades should be used in conjunction with the competition plenums.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99760511601

The product you are viewing cross references to these numbers