Zoom In

Lower Control Arm Bushes for Porsche 996 / 997 - Designtek

Set of 4 Bushes for Two Control Arms

DesignTek® has developed the replacement lower control arm bushings to improve the handling characteristics of the Porsche 996 and 997 cars. These non-adjustable lower control arm bushings eliminate the unwanted caster changes while the car is under acceleration and braking. The DesignTek® lower control arm bushings are made from 6061 T6 aluminum to help stiffen the Porsche suspension without adding road harshness to the interior of the car. These bushings are a great improvement for anyone who frequents the track in their 996 or 997 cars.

Set of 4 Bushes for Two Control Arms.
Fits OEM or upgraded GT2/GT3 control arms.

Fits:
Porsche 996 C2/C4/C4S 1998-2005
Porsche 996 TURBO/GT3/GT2

*Porsche Boxster 986 Front Only

Zoom In

Lower Control Arm Kit for Porsche Models

Type: Adjustable Thrust Arm Bushing

Brand: RSS

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable – for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry – adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

Zoom In

Lower Control Arm Kit for Porsche Models

Type: NON - Adjustable Thrust Arm Bushing

Brand: RSS

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable – for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry – adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

Zoom In

Underdrive Pulley for Porsche 996/997/Boxster 986

Brand: RSS

The RSS Lightweight Underdrive Pulley is made from 6061-T6 aluminum. Offers improved HP & TQ by reducing drag from the power steering pump, A/C, water pump and alternator.

The RSS lightweight underdriven crank pulley is designed for Porsche owners who are looking for a easy bolt-on 7-10 rear wheel horsepower. The CNC machined pulley fits all Porsche 987.1 Boxster and Cayman cars. The idea of the underdrive pulley is that it will reduce demand that the stock pulley puts on the power steering pump at high engine revs. Not only will this preserve the longevity of the pump, it will also improve performance, throttle response, and give the track racer a car to be confident in. Since the pulley is lighter then stock, the rotational weight reduces load on the engine slightly. This pulley kit includes the removal and install tool in addition to a new bolt for easy install. With the inclusion of these tools, you can switch back to the stock pulley if needed for warranty purposes. This is an absolute must for track drivers!

Replacement Pully for Original Porsche parts No. 99610211563

Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987

**Please note you will need a new shorter Pully Belt which you can purchase from us.
99610215199/1
Under drive pulley w/ air conditioning - 2100mm

99610215198/1
Under drive pulley w/o air conditioning - 1905mm

Zoom In

Lower Control Arm Adjusting Shims for Porsche Models - RSS

Brand: RSS

Price: One Alignment Shim

Sizes: 1mm to 11mm
To be used with Motorsport RSS Lower Control Arms

Zoom In

Lower Arm Bush Mono Ball Kit. Porsche 986 / 996 / 987 / 997 / 987C - RSS

The RSS Monoball A-Arm Kit installs in place of the factory rubber lower control arm bushings
and will considerably improve handling performance and feedback.

Set of 4

Fits:
Porsche 986 Boxster 1994-04
Porsche 987 Boxster >>06
Porsche 987C Cayman >>06
Porsche 996 1998-04
Porsche 997 >>06

Zoom In

Adjustable Front Drop Links for Anti Roll Bar Porsche 997 Carrera - RSS

Type: Adjustable Front Drop links

Brand: RSS

Front adjustable droplinks for Porsche 997 Carrera Models, Made in USA High Grade Aerospace Materials

Set of 2

Fits: Fits:
Porsche 987 Boxster MKI 2005-08 Front or Rear
Porsche 987 Boxster MKII 2009>> Front or Rear
Porsche 987C Cayman MKI 2005-08 Front or Rear
Porsche 987C Cayman MKII 2009>> Front or Rear

Porsche 997 MKI C2 / C2S 2005-08 Front
Porsche 997 MKII C2 / C2S 2009>> Front
Porsche 997 GT2 2007>> Front
Porsche 997 GT2-RS 2010>> Front
Porsche 997 GT3 2007>> Front
Porsche 997 Special model "911 Sport Classic" 2009>> Front
Porsche 997 Speedster 2009>> Front

Drive Belt for Under Drive Pully cars WITH Aircon. Porsche 996/ Boxster 986/997

What size serpentine belt to run when using an under drive pulley?

The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.

So in review:
Stock pulley w/ air conditioning - 2115mm
Under drive pulley w/ air conditioning - 2100mm

Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche 997 3.6L
Porsche Boxster 986
Porsche Boxster 987

Drive Belt for Under Drive Pully cars WITHOUT Aircon Porsche 996/ Boxster 986

What size serpentine belt to run when using an under drive pulley?

The stock serpentine belt length for a 986 Porsche Boxster or Porsche 996 with air conditioning is 2115mm Porsche part # 996 102 151 64. If you remove the air conditioning but keep the stock drive pulley you will need a new serpentine belt that is 1930mm in length. If you then decide to add an underdrive pulley in the range of 4.25 to 5 inches in diameter you will need a belt 1905mm in length. For those of you who would like to add an under drive pulley with air conditioning, the proper length is 2101mm.

So in review:
Stock pulley w/o air conditioning - 1930mm
Under drive pulley w/o air conditioning - 1905mm


Fits:
Porsche 996 3.4L
Porsche 996 3.6L
Porsche Boxster 986