ECU Reader / Fault Finder

iCarsoft CR Ultra . 

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.

Advanced automotive diagnostic tool

● ULTRA SMART
● ULTRA HIGH PERFORMANCE
● ULTRA RIGHT FOR YOU

iCarsoft CR ULTRA is and advanced automotive diagnostic tool with 10inch touch screen tablet, Bluetooth and WI-FI. It enjoys more than 30 special service functions, supports ECU coding, programming, active test and more. With this all-in-one intelligent automotive scanner, you are able to diagnose, research, and manage any issues at fingertips with its smooth logical workflow, where fully optimizes easy-to-use software allows advanced OE-level diagnostics of online ECU coding, complete bi-directional functions, access to all vehicle modules, etc.


CR ULTRA GLOBAL VEHICLE COVERAGE

European:
For Abarth, For Alfa Romeo, For Audi, For Bentley, For Mercedes-Benz, For BMW, For Bugatti, For Citroen, For Dacia, For EU-Ford, For Ferrari, For Fiat, For Jaguar, For Lamborghini; For Lancia, For LandRover; For Maserati; For Maybach; For Mini; For Opel; For Peugeot; For Porsche; For Renault, For Rolls-Royce, For Rover, For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Vauxhall, For Volvo, For VW, For (UKRAINE) ZAZ, For (RUSSIA) GAZ, For IZH, For PAZ, For SEAZ, For UAZ, For VAZ.

American:
For Buick; For Cadillac; For Chevrolet; For Chrysler; For Dodge; For Ford; For GM; For Hummer; For Jeep; For Lincoln; For (BRAZIL) BX-Fiat; For BX-GM.

Australian:
For Au-Ford; For Holden.

Asia:
For (Japan) Acura; For Daihatsu; For Honda; For Infiniti; For Isuzu; For (Japan) Isuzu; For Lexus; For Mazda; For Mitsubishi; For Nissan; For Nissan GTR; For Scion; For Subaru; For Suzuki; For (Thailand) Isuzu; For Toyota; For (Korea) Daewoo; For Hyundai; For KIA; For Samsung; For Ssangyong; For (China) Baic; For Beijing; For Changan;For Changan-Ford; For Changcheng; For Changhe; For (China) Suzuki; For (China) Peugeot; For (China) Honda; For (China) Nissan; For (China) XK; For Flyer, For BYD; For Fukang; For Futian, For Foton; For Geely; For Gonow; For GZ Honda; For Hafei; For Haoqing; For HC For BMW; For Hmada; For Huachen; For Isuzu,For JMC; For Jacty; For Jianghuai; For Jiao; For Jinlong; For Joylong; For Lifan; For Liuwel-TY; For Luxgen; NJ Fiat; For Qirul-TY, For Chery; For Qoros; For Saicmg; For Spark-TY; For (China) Toyota; For Trumpchi GAC; For Weili; For Xiaokang For Dongfeng; For Xili,For Faw For Tianjin; For Xinkai; For (China) Mazda; For Zhongshun; For Zhongtai,For Zotye; For Zhongxing; For (India) Mahindra; For Maruti; For Tata; For (Malaysia) Perodua; For Proton; For (Iran) MVM.

PRODUCT FEATURES
SUPPORTS MORE THAN 30 SERVICE FUNCTIONS.

1. Comprehensive OBD relearn coverage.
2. Onscreen relearn procedure.
3. Read &Clear codes for all available systems.
4. Display live data in text, graph & analog for easy data review.
5. Auto VIN technology can automatically identify model and year information in no time.
6. Actuation Test / Bi-directory Test is used to access vehicle-specific subsystem and component tests.
7. Steering Angle Sensor (SAS) calibration: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
8. Oil Light/Service Reset: Support service lamp reset, reset service mileage and service intervals.
9. Electronic Parking Brake (EPB): System maintenance deactivates and reactivates the EPB system for replacement and initialization.
10. Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Battery Management System (BMS): Registers new battery to the BMS while battery replacement.
12. Electronic Throttle Control system (ETC): Relearns the throttle valve control value while clear or replaces the throttle value.
13. ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
14. Injector coding: Relearn the injector control parameter while the injector renewed or replaced.
15. Support TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
16. AFS Head Lamp reset means that the adaptive front lighting system can be rotated to either side, pressing the button means they
stay pointing straight forward, and don't turn anymore when turning the steering wheel.
17. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
18. Gearbox Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
19. Air conditioning service: Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
20. Air Filter Self-learning process after replacing the air filter.
21. Fuel Pump activation function, activate it when replace a new one.
22. ODO Reset, this function allow you to revise the date of odometer and write the original date into new odometer.
23. Seat Match, this utility performs the re-initialization of the power seat adaptive memory.
24. Windows/Door/Roof, when replacing door glass and after battery replacement on certain year, make, model vehicles special steps need to be taken in order to properly replace and reprogram the vehicle so the electric windows work properly , the door window glass position can be learned by executing this routine, which enables pinch protection and one touch up function.
25. Supports ADblue Reset, Stop/Start Reset, Tyre Reset, Nox Sensor Reset, Gear Learning and more.
26. Automatic software upgrade.
27. Easy to feedback test questions online.
28. Provides convenient instruction with customer in interface.
29. Language Change, this routine is to change language displayed in the instrument display.
30. Multi-language: English, German, Dutch, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Hungarian, Chinese. (More languages will be added in the future.)

Note!
*Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
*This scan tool covers 20 years models, so some functions may not be available on all years /models.

STRONG HARDWARE:

ANDROID: 10.0
RAM: 4GB
ROM: 64GB
BATTERY: 6000mAh/7.6V
SCREEN: 10 Inches
CAMERA: 8 million pixel rear

iCarsoft CR Eagle Professional Multi-brand Multi-system Car Diagnostic Tool.

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this. 

10 inch professional automotive scan tool with videoscope and TPMS programming function.

• Warranty, update and support
• One Year Warranty for Hardware (Except for human damage).
• Lifetime free software update.
• Lifetime technical support.

CR Eagle Wireless Bluetooth diagnostic tool for 58 Major Vehicle Makes

iCarsoft CR Eagle is a professional and powerful car diagnostic tool for multi-brand vehicles. It’s an OE-level full system diagnostic for workshop and car enthusiast.

General diagnostic functions as following:

• Touch Screen
• Wi-Fi Internet
• One-Key Upgrade
• One-Key Feedback
• Multilingual Interface and Instructions
• Full OBDII/EOBD Function
• Battery Voltage Test
• Read and Clear DTC
• Read Ecu Information
• Read Live Data
• ECU Models（OBDII-16 DLC ）
  
• Read and Clear Freeze Frame
• Auto VIN Identify
• Actuation/Bi-directional Test
• TPMS Sensors Programming

Strong Hardware and Software makes the CR Eagle easy and intuitive operation:
The CR Eagle comes with 10.1-inch LCD touchscreen and 4GB(RAM) + 128GB(ROM).
Built-in TPMS Programming module and equipped with 4pcs TPMS sensors.
Standard equipped with Videoscope.
Fast AutoVIN Identify: Automatically retrieves detailed vehicle information, eliminating manual entry and saving time. It improves accuracy, reduces human errors, and enhances user experience, making diagnostics faster and more reliable.
Compatible with CAN-FD protocol, enhancing the real-time performance of vehicle diagnosis.
Support V.A.G Guide Function.
Multi-language: English, Deutsch, French, Dutch, Spanish, Czech, Swedish, Russian, Hungarian, Norwegian, Portuguese, Italian, Polish, Danish and Finnish.

iCarsoft CR Eagle supports powerful Bi-directional control/Active Tests
Bi-directional control/ Active Test can be used to perform specific operations or to test different components and systems of a vehicle, help check or adjust vehicle functions, as well as troubleshoot and repair. Specifically, Bi-directional control/ Active Test can perform the following operations:

• Activation test: it can activate a specific function or device, e.g., activate a remote control, turn on the vehicle's special lights, activate the vehicle's alarm system, etc.
• Sensor Test: allows testing the vehicle's sensors, e.g., testing the vehicle's temperature sensors, pressure sensors, speed sensors, etc. to make sure they are working properly.
• Actuator Testing: this allows you to test the vehicle's actuators, such as the vehicle's power windows, sunroofs, mirrors, air conditioning systems, etc. to ensure they are functioning properly.
• System Calibration: It can calibrate certain systems of the vehicle, such as the steering angle sensor, braking system, airbag system, etc. to ensure their accuracy and stability.
• Troubleshooting: can detect and diagnose vehicle fault codes to help identify problems with the vehicle and provide appropriate solutions.

**The function is dependent on your car’s make, model and year. Contact us for more details if needed.

The iCarsoft CR Eagle scan tool support ECU Coding (Customize)
With ECU coding, the parameters and settings of the ECU can be modified to achieve some specific functions or to optimize vehicle performance. Specifically, ECU Coding can be used in the following aspects:

• Troubleshooting and Repair: ECU Coding can be used to read and clear fault codes, diagnose vehicle malfunctions and perform repair operations accordingly.

• Accessory Replacement: When replacing certain vehicle components, ECU Coding may be required to make them compatible with the vehicle system. Warm Tips: Before coding, please read and record the original module’s information.

CR Eagle supports TPMS Programming.
The iCarsoft CR Eagle TPMS Programming diagnostic tool comes with built-in TPMS programming module. It’s a perfect tire pressure diagnosis tool, which can realize Sensor Activation, Sensor Programming, Sensor Learning, Tire Pressure Fault Diagnosis.

Lifelong free online update
In contrast to other OBDII scanner on the market that demand users to pay for updates, our CR Eagle car scanner comes with 40+ reset functions with lifetime free updates. Increasingly sophisticated software for better compatibility. And the CR Eagle scan tool support Wi-fi and the users can update just with one click on the menu.

9 Hot Service Functions covering your daily maintenance needs.

• Oil Reset (For 57 vehicle makes): Allows you to perform reset for a new calculation of the engine oil life system once changed the oil, reset the service lamp, service mileage and service intervals.
• Electronic Throttle Control (For 56 vehicle makes): Relearns throttle valve control parameters after resetting or replacing the throttle body.
• EPB-Brake-Pad Reset (For 53 vehicle makes): Allows you to retract electric parking brake calipers and reset the brake pad after the replacement
• Steering Angle Reset (For 57 vehicle makes): Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
• DPF Regeneration (For 54 vehicle makes): Specially works for diesel particulate filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
• Injector Coding (For 54 vehicle makes): Relearn the injector control parameter while the injector renewed or replaced.
• ABS Bleeding (For 53 vehicle makes): Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
• TPMS Reset (For 56 vehicle makes): Allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
• Battery Management Service (For 48 vehicle makes): Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
  
  

Standard equipped with 4 commonly used OBDI adaptors - The CR Eagle supports part of the OBDI protocol vehicles. It comes with 4 most commonly used adaptors.
Benz38Pin multi-system adaptor
BMW20Pin adaptor

Standard equipped with Videoscope and 4pc TPMS Sensors - The CR Eagle auto diagnostic tool also with a nice Videoscope and 4pcs TPMS sensors. It’s an all-in-one tool for the workshop.

Product Specifications:
Operating System: Android 10.0
Processor: Quad Core 2.0 GHz
Memory: 128GB
Display: 10.1-inch LCD capacitive touchscreen with 1280x800 resolution
Connectivity:
USB Host
USB Type C
Wi-Fi (2.4/5 GHz)
Bluetooth
Audio Input/ Output：
Input: Microphone
Output: Speaker
Power and Battery：
3.8V/10000mAh lithium-polymer battery
Charges via 5V DC power supply
Tested Battery Life： Around 5 hours of continuous use
Battery Charging Input： 5V / 3A
Power Consumption： 800mA (LCD on with default brightness, Wi-Fi on) @3.8 V
Operating Temp. ：0 to 40°C (32 to 104°F)
Storage Temp. ：-20 to 70°C (-4 to 158°F)
Operating Humidity： 5% - 95% non-condensing
Dimensions (W x H x D)：
294mm X 206mm X 42.5mm
(11.57inch X 8.11inch X 1.67inch)
Net Weight :≈1500g (3.30lb)

Supported Automotive Protocols: ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda

Diag-H Protocol, TP2.0, TP1.6, DoIP, CAN FD, J2534.

iCarsoft CR PRO Professional multi-system car diagnostic tool for multiple global car brand manufacturers.

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this. 

iCarsoft CR MAX BT is a professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (more than 40 vehicle makes) developed by iCarsoft technology inc. 
With a 7.0" LCD capacitive touchscreen that displays at 1024x600 quality with the ability to quickly read and clear DTCS for all available modules for the majority of makes and models on the market, the CR MAX provides you with superior special functions. 

It features full ECU diagnosis for most vehicle brands and test modes mainly includes: CANBUS, ISO9141, KWP2000, AND J1850 etc.

It enables technicians to accurately diagnose complex problems 

Product Features

1. Comprehensive OBD relearn coverage.
2. Onscreen relearn procedure.
3. Read &Clear codes for all available systems.
4. Display live data in text, graph & analog for easy data review.
5. Auto VIN technology can automatically identify model and year information in no time.
6. Actuation Test / Bi-directory Test is used to access vehicle-specific subsystem and component tests.
7. Steering Angle Sensor (SAS) calibration: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
8. Oil Light/Service Reset: Support service lamp reset, reset service mileage and service intervals.
9. Electronic Parking Brake (EPB): System maintenance deactivates and reactivates the EPB system for replacement and initialization.
10. Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
11. Battery Management System (BMS): Registers new battery to the BMS while battery replacement.
12. Electronic Throttle Control system (ETC): Relearns the throttle valve control value while clear or replaces the throttle value.
13. ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
14. Injector coding: Relearn the injector control parameter while the injector renewed or replaced.
15. Support TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
16. AFS Head Lamp reset means that the adaptive front lighting system can be rotated to either side, pressing the button means they stay pointing straight forward, and don’t turn anymore when turning the steering wheel.
17. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
18. Gearbox Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
19. Air conditioning service: Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
20. Air Filter Self-learning process after replacing the air filter.
21. Fuel Pump activation function, activate it when replace a new one.
22. DTC library to look up when user is operating this tool.
23. Support Freeze Frame of Fault Code functions.
24. Automatic software upgrade.
25. Easy to feedback test questions online.
26. Provides convenient instruction with customer in interface.
27. Multi-language: English, German, Dutch, Spanish, French. (More languages will be added in the future.) Note!
*Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
*This scan tool covers 20 years models, so some functions may not be available on all years /models.
*We reserve the rights to make any change to this description without notice.

Operating System: Android 8.1.0
Processor: Quad-core 1.3 GHZ
Memory：16GB
Display：7-inch LCD Capacitive touchscreen with 1024x600 resolution
Connectivity: Mini USB 2.0/ USB2.0/ Wi-Fi / Bluetooth/OBD II
Body Colour: Black
Audio Output: Buzzer and Speaker
Input: N/A
Power and Battery: 3.7 V/5000MAH Lithium-Polymer battery
Charges Via 5 VDC Power Supply: 0BD DLC Voltage Range:9-18V
Test battery life: Around 5 hours of continuous use
Battery  Charger:5V/2A
Power Consumption:500MA (LCD on with default brightness, Wi-Fi on) @3.7 V
Operating Temp: 0 to 40° C (32 TO 104°F)
Storage Temp:-20 TO 70° C(-4 TO 158°F)
Operating Humidity: 5%-95% Non-condensing
Dimensions (W*H*D): 40.0MM*150.0MM*35.0MM
Net Weight:750G

iCarsoft CR PRO Professional multi-system car diagnostic tool for multiple global car brand manufacturers.
Works on all cars upto 2017 with OBDII port.

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this.  

  ICARSOFT CR PRO SUPER ADVANTAGES:
• Diagnose Single Brand of most Models (OBDII-16DLC)
• Full System Diagnosis
• Read & Clear DTC
• Read Live Data
• Oil Service Reset
• Electronic Parking Brake (EPB) system maintenance
• Battery Management System (BMS)
• Diesel Particulate Filter (DPF) Regeneration Control System
• Electronic Throttle Control System (ETC)
• Steering Angle Sensor (SAS) Calibration
• Battery Test
• Data Review and Print
• Full Speed Upgrade via PC
• 4.0″ TFT LCD, 480*320 Pixels
• Multi-Language: English, German, Dutch, Spanish and French

ICARSOFT CR PRO OBDII FUNCTION FOR ALL CAR BRANDS
OBDII Function for all OBDII cars.

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes.
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle.
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft CR PRO OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.

iCarsoft CR PRO OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.

ICARSOFT CR PRO FEATURES FOR GLOBAL CAR BRANDS

• iCarsoft CR PRO reads and clears trouble codes on most of the electronic systems such as engine, transmission, ABS, airbag etc.
• Support OBDII/EOBD (Ten Modes of Operation)
• Full ECU Diagnosis
• Oil Light/Service Reset
• Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization
• Battery Management System (BMS) registers new battery to the BMS while battery replacement
• Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator
• Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve
• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement
• Applies to most models which equipped with OBDII-16 DLC

iCarsoft CR PRO vehicle coverage for global car brands:
Acura | Alfa Romeo | Audi | BMW | Chrysler | Citroën | Dacia | Daewoo | Fiat | Ford | GM | Holden | Honda | Hyundai | Infiniti | Isuzu | Jaguar | Kia | LandRover | Lexus | Mazda | Mercedes-Benz | Mini | Mitsubishi | Nissan | Opel | Peugeot | Porsche | Renault | Saab | Scion | Seat | Skoda | Smart | Subaru | Suzuki | Toyota | Vauxhall | Volkswagen | Volvo

ICARSOFT CR PRO CONTENTS

• iCarsoft CR PRO scantool
• TF card with diagnostic software
• OBDII cable
• Users Manual
• PC Connecting cable
• Nylon Carry Case 

iCarsoft POR V3.0

Porsche Diagnostic Scanner

PIWIS-Grade Diagnostics. Built for Porsche Owners and Independent Technicians.

The POR V3.0 covers every Porsche system — from engine and transmission to SRS airbag, ABS, and dealer-level ECU adaptations — with full bidirectional control, 26 service functions, and lifetime free software updates. Compatible with all Porsche models from 1996 to 2025.

✓ Advanced Bi-Directional Control
✓ CAN-FD Supported
✓ 15 Languages
✓ Lifetime Free Updates

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, iCarsoft will be able to give you product support should you require this. 

 

1.      Powerful Hardware

The iCarsoft POR V3.0 features a vibrant 4-inch screen and intuitive button navigation for quick, effortless menu browsing. It also comes standard with a dedicated card reader, making software and vehicle database updates entirely seamless via your PC. No Wi-Fi needed — update anytime via the included card reader and your PC.

2.      Lifetime Free Software Upgrades

Unlike other OBD scan tools on the market that require annual subscription fees, the POR V3.0 offers lifetime free software upgrades.

3.      Supports the Latest CAN-FD Protocol

CAN-FD (Controller Area Network – Flexible Data-rate) is the next-generation communication protocol that Porsche has adopted across its latest platforms.

4.      Advanced Bi-Directional Control

Ordinary OBD scanners only read fault codes — they tell you what might be wrong, but not which part is actually failing. The POR V3.0 goes further: full bidirectional control lets you send commands directly to individual components and watch them respond in real time.

On a Porsche, that means you can:

•    Cycle the ABS pump motor and bleed each wheel circuit individually

•    Activate the fuel pump to verify pressure before tearing down the rail

•    Test window regulators, door locks, mirrors, and sunroof motors module by module

•    Command throttle body opening to diagnose idle and acceleration faults

•    Run actuator tests on the PDK transmission, PASM dampers, and PCM infotainment modules

Identify the faulty part in minutes — not days of trial-and-error part-swapping.

5.      Fast AutoVIN Identification:

Skip the manual VIN typing — simply plug in, and the tool identifies your vehicle in seconds. No typos, no extra lookup time. This boosts accuracy, eliminates input errors, and delivers a smoother, more reliable diagnostic experience.

6.      Supports 15 Languages

Porsche scanner POR V3.0 supports English, German, French, Dutch, Spanish, Czech, Swedish, Russian, Hungarian, Norwegian, Portuguese, Italian, Polish, Danish, and Finnish.

7.      26 Comprehensive Service Functions

The POR V3.0 is far more than a basic code reader. It integrates 9 commonly-used service functions for daily maintenance and 17 advanced professional functions for complex repair tasks — 26 in total.

▸ 9 Hot Service Functions covering your daily maintenance needs.

Oil Reset:

Allows you to reset the engine oil life system, service lamp, service mileage, and service intervals after an oil change.

Electronic Throttle Control:

Relearns throttle valve control parameters after resetting or replacing the throttle body.

EPB-Brake-Pad Reset (EPB):

Retracts the electric parking brake calipers and resets the brake pads after replacement.

Steering Angle Reset (SAS):

Calibrates the steering wheel to the straight-ahead position, or recalibrates the SAS after steering component replacement.

DPF Regeneration:

Performs DPF regeneration, component replacement initialization, and DPF relearning after engine control unit replacement — for diesel particulate filter systems.

Injector Coding:

Relearns the injector control parameters when an injector is renewed or replaced.

ABS Bleeding:

Bleeds air from the system to restore ABS brake response, or performs a relearn procedure after ABS replacement.

Air Suspension Service:

Supports calibration, height adjustment, system reset, and fault code clearing for air suspension systems. Lets you precisely set ride height, perform system initialization, and resolve common air suspension faults.

Battery Management Service (BMS):

Evaluates the battery charge state, monitors closed-circuit current, registers battery replacement, and activates the vehicle's sleep mode.

▸ 17 High level service functions for professional technicians:

TPMS Reset:

Allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

Air Conditioner Service:

Supports routine maintenance of A/C modules, including A/C system adaptation reset, compressor reset, compressor break-in, and stepper motor initialization.

Head Lamp Service:

Calibrates and initializes the adaptive headlamp system (AFS/Matrix LED) — required after headlight assembly replacement, level sensor adjustment, or front suspension repair. Essential for Porsche models equipped with Dynamic Light System or LED Matrix headlights.

Body Stability Control Service:

Supports routine maintenance of DSC modules, including resetting or deleting adaptation values, and initializing the unit.

Engine Control Service:

Supports routine maintenance of engine modules, including resetting or deleting adaptation values, and calculating fuel consumption.

Transmission Control Service:

Supports routine maintenance of transmission modules, including resetting adaptation values and transmission fluid level adaptation.

Air-Bag Reset:

Resets airbag data to clear the airbag (SRS) warning light after a collision.

Seat Service:

Calibration after repairing or replacing the seat position drive motor.

Door-Window-Roof:

Learns the top position of the door window glass, enabling pinch protection and the one-touch-up function.

ODO Meter Reset:

Reads odometer values stored in multiple ECUs (for service and verification purposes).

Exhaust Gas Recirculation:

Recirculates a portion of engine exhaust gas back into the intake system.

Clutch Matching:

Learns the clutch contact point and engagement position where the clutch begins to transmit engine torque. Applicable after ECU replacement, transmission removal/replacement, or clutch replacement. For adaptive clutches only.

High Voltage Battery:

Supports EV/hybrid high-voltage battery maintenance, including replacement adaptation and status monitoring.

Cruise Control System:

Performs adaptive cruise control (ACC) calibration and personalization

Radar/Camera:

Performs radar and camera learning and calibration (ADAS).

Vehicle Setup:

Configure features and match new components.

Seat Belt:

Performs seatbelt pretensioner reset and related maintenance after airbag deployment.

Additional service functions are available in the Miscellaneous section.

⚠ Compatibility Notice: The specific diagnostic service functions vary by vehicle brand, model, production year, and ECU configuration.

9. Powerful Full Systems Diagnostics

In addition to the four standard systems (Engine, ABS, Airbags, and Transmission), the POR V3.0 provides diagnostic coverage for more complex vehicle systems.

• Read and Clear DTCs

• Read ECU Information

• Read Live Data

• Access all ECU modules via OBDII-16 DLC

• Read and Clear Freeze Frame Data

10. OE-Level Advanced Diagnostic Functions

Actuation/Bidirectional Test

Standardizing power windows

Calibration of combination sensor

AHBA Calibration

Headlight beam adjustment calibration

Calibrate longitudinal acceleration sensor

Calibrate fuel-level sensor

Calibrate rear lid

Calibrate seat occupancy detection

Adaptations

Speed sensor test

Steering column adjustment normalizing run

Swirl-flap actuator

11. Full OBD2 Test Modes — Emission-Ready

Supports all 10 OBD2 test modes for vehicles compliant with 1996+ OBDII/EOBD/JOBD/KOBD/CAN/CAN-FD standards: Read Codes, Erase Codes, I/M Readiness, Live Data, Freeze Frame, Vehicle Information, O2 Monitor Test, On-Board Monitor, EVAP System Test, and Pending Codes.

12.Support Diagnostic History and Report printing

Users can quickly access previously tested vehicle systems and save, share, and print diagnostic reports.

Use the Feedback function to report issues encountered during use — our technical team will review and provide assistance. Diagnostic data can also be printed for future reference by connecting the device to a Windows PC via USB.

13. Product Specifications:

Display

4.0-inch TFT LCD color screen with 480 x 320 resolution

Connectivity

USB 2.0 / OBDII

Power

9-18V

Type C Input

5V / 500mA

Power Consumption

1.8W (Typical)

Operating Temp.

0 to 50°C (32 to 122°F)

Storage Temp.

-20 to 70°C (-4 to 158°F)

Operating Humidity

5% - 95% non-condensing

Dimensions (W x H x D)

206 × 104.1 × 32.6 mm (8.11 × 4.10 × 1.28 in)

Net Weight

  ≈ 350 g

Supported Automotive Protocols

ISO 9141-2, ISO 14230-2, ISO 15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO 11898 (High-speed, Medium-speed, Low-speed, and Single-wire CAN), CAN-FD, SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6

 

14.Packing List:

• Main Unit

• Carry Case

• OBD2 Main Cable (16-pin)

• USB-C Cable

• TF Card Reader

• Multi-Language User Manual

 .............................

FAQ:

Q1: Is the software updated regularly? Are updates free?
A: Yes. POR V3.0 includes lifetime free software upgrades. No annual subscription required.  

Q2: What's the difference between POR V3.0 and the older POR V2.0?
A: The ultimate upgrade of the POR V3.0 over the POR V2.0 is its newly added Bi-Directional Control (Actuation Tests) capability and a significantly expanded range of service reset functions, both of which are completely unsupported on the older POR V2.0.

Q3: The POR V3.0 cannot recognize my vehicle by AutoVIN, does it mean the device is faulty?
A: It doesn’t mean the device is faulty. You can send your vehicle VIN number to our support team; we will check if AutoVIN function supports your vehicle. If not available yet, you can manually select the vehicle model to diagnose, normal functions won’t be affected. Our R&D team will add your VIN information into the database and release relevant updates later.

Q4: DTCs can be read normally but fail to be cleared or reappear after clearance, why?
A: Please keep ignition on and engine off. Record freeze frame data first before clearing codes.

Persistent hardware faults need physical repair prior to code clearance.

Some fault codes of systems like SRS and ABS can only be cleared after finishing bidirectional tests.

Q5: The device turns on but cannot establish a diagnostic connection. What should I do?
A: Please verify your vehicle model and production year. POR V3.0 supports Porsche models manufactured from 1996 to 2025. Certain service functions for 2024 vehicles are still being optimized. Disable the vehicle power-saving mode and update your firmware and software to the latest version.

ICarsoft Professional Diagnostic Tool CR Plus for Multi-brand Vehicles

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this. 

iCarsoft CR Plus is a well built comprehensive diagnosis instrument by iCarsoft.It's not only including full function of OBDII/EOBD,but also support more function of Four system( Engine, automatic transmission, anti-lock braking system and airbag ) of certain models of car, such as read and clear code, multi languages, data flow picture display, graph. It also includes Electronic Parking Brake (EPB) release, Steering Angle Sensor (SAS) and Oil Service Light resets. View Engine, ABS, SRS along with A/T enhanced data



Features & Benefits:

• OBDII diagnostic full function
• Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
• Support 4 Systems: Engine, Transmission, ABS, and Airbag.
• Basic diagnostic functions: read DTCs, clear DTCs, and read data stream
• Support DTCs help, data stream wave display, history data record and replay
• Online upgrade, you can download the latest version anytime anywhere.
• Auto module search
• Enhanced OBDII Mode 6
• Supports vehicles 1996 & newer ( OBDII & CAN )
• Retrieves generic P0, P2, P3 & U0 codes,
along with manufacturer specific P1, P3 & U1 codes – both permanent & pending
• Read & Clear Check Engine Lights
• Turn off MIL & reset monitors
• Displays DTC definitions right on the screen
• View freeze frame data & I/M Readiness monitor status
• Display live PCM data stream & O2 Sensor test data
• Graph, record & replay data in full color
• Resets Oil Service Light
• Brake Pads Reset
• Steering Angle Sensor Calibration
• Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time
• Retrieves vehicle information ( VIN, CIN and CVN )

Twelve Super Advantages:

1. Read & Clear DTCs
2. Read Data Stream
3. Full ECU Diagnosis
4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC
5. Easy To Use With Metal Dome Keys
6. Oil Light/Service Reset
7.Brake Pads Reset
8.Steering Angle Sensor Calibration
9. 4.0" TFT LCD With 480 * 320 Pixels
10. USB 2.0 High Speed Upgrade
11. Upgrade Via TF Card
12. Multi-language: English, French, Spanish, German, Italian, Russian and Dutch.

And for more, refer to User's Manual.

Specifications:

• Display: 4.0" TFT LCD , with 480 * 320 Pixels
• Operation Temperature: 0℃ -- 50℃
• Storage Temperature: -20 ℃ -- 70 ℃
• Power: 9V -- 18V
• Operating current: 150mA@12V(Typical)
• Power consumption: 1.8W(Typical)
• Dimension: 205mm*110mm*31mm(LxWxH)
• Weight: 350g

OBDII function:

1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are
operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by
the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of
the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring
tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.
Before using the system test function, refer to the vehicle's service repair manual to determine the procedures
necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification
number (CVN), and other information of the test vehicle.

Contents:

● Main Unit
● Hardcopy User's Manual
● Main cable
● USB cable
● TF Card
● Nylon carry case
● TF Card reader 

iCarsoft VDSP2000 Videoscope for CR Max BT diagnostic tool

Please note: this is an electronic unit, once this is registered to the user or used it will not be able to return, ICarsoft will be able to give you product support should you require this. 

Only  to be used with CR MAX BT diagnostic tool

The iCarsoft USB Inspection Camera VDSP2000 Videoscope is a perfect tool for viewing and capturing video and still images of hard-to-reach areas.

It’s a perfect partner for iCarsoft tablet diagnostic tool CR MAX BT.

With its fluid resistant 5.5mm head and LED illumination, dark and fluid soaked areas are no longer a problem.

Features and Advantages

• View and record images and videos.
• Take images easily with one-click snap shot button.
• Easy to adjust the strength of light (6 levels).
• Extremely small 5.5mm camera-IP67 certified for immersion, allows for use in wet, fluid soaked spaces.
• 5.5mm camera head easily fits into most spark plug holes for inspection.

Specifications

Len O.D. (mm) : 5.5mm
Tube O.D. (mm) : 4.8mm
Tube Length: 1000mm
USB Cable Length: 1500mm
Resolution: 1280x720
Operating Temperature: 0℃~65℃
Power Supply: USB 5V
USB Port: USB2.0/Type C/Micro USB