Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.co.uk/images/schemaLogo.png https://www.design911.co.uk/images/schemaLogo.png +443456003478 https://www.design911.co.uk Facebook Instagram

Tow Eye Hooks & Tie Downs

Filter by brand
DISPLAYING 1 to 25 (of 25 products)
Rennline retractable tow hook set. Porsche 911 74-89 or UNIVERSAL
Code: E1718
Rennline retractable tow hook set. FRONT & REAR.

Fits:
Porsche 911/930 1974-89 FRONT & REAR

A majority of newer factory built race cars feature retractable tow hooks, and now Rennline has engineered a tow hook for your custom race car that offers the same advantages. These retractable tow hooks are available as "bolt on" units for any corner of your 1974-1989 911, 930, 912 with fiberglass bumpers, or when used with our universal mounting brackets, these hooks can be mounted in many different configurations based on your specific needs. Made from powder-coated steel with a spring-loaded retractable hook and comes with (2) tow stickers. Your shins will thank you.

To see this hook in action, CLICK HERE

Note: Pictures may not show actual product.
About this kit
Kit
Rennline Tie Downs. UNIVERSAL
Code: E04
Rennline Tie Downs. UNIVERSAL

SET OF 2

Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations: straight, 90°, 66°, and 45° to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.

The 66° tie downs are designed specifically for 996/997 with upgraded rear sway bars. GT2 and GT3 cars will also use the 66° tie down.

Note: These come in sets of 2

Note: Pictures may not show actual product.
Best Price
Brey Krause Tow Hook for Porsche 964 / 993 / 996 / 997 / 944 / 924 / 968 / Boxster / Cayman
Code: R-9037
Brey Krause Tow Hook for Porsche


breykrause 

For all Porsche models that accept screw type tow hooks, Front and Rear

The R-9037 Fold Down Tow Hook installs in seconds and folds down to eliminate protrusion from the car's bodywork. It fits Porsche's with factory screw-type tow hooks (excluding Cayenne models). It has a two inch towing eye, which is required for track events. It is precision CNC machined stainless steel, tig welded, and has a polished shaft and rubber locking rod to prevent loosening.

Material: Stainless steel finish: polished shaft, chrome-finished towing eye
Weight: 1.35 lbs.
Models: For Porsches that come with a factory screw type tow hook, excluding Cayenne models.
Installation: Installs in seconds, directly into the existing tow hook hole.
Miscellaneous: Precision CNC machined shaft and tig welded.

Best Price
Rennline Rear Tie Down. Porsche 986 Boxster / 987 Cayman / 987 Boxster
Code: E35
Rennline Rear Tie Down

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porschr 987 Cayman

Securing a Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the rear of your 986/987 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red.

Each kit comes with (2) rear hooks.

Note: Also available with intergrated subframe support brace (Not included, but available separately).

Note: Pictures may not show actual product.
Best Price
Rennline Folding Tow Hook - REV2
Code: E19209
Rennline Folding Tow Hook - REV2
Universal Screw for use with Universal 5/8-11 Thread

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours are the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Red "TOW" Graphic
• Go Pro Camera mount compatable (Mount sold Separately)
Best Price
Rennline folding tow hook rear. Porsche 718 / 981 / 991 / Panamera
Code: E19239
Rennline Folding Tow Hook - Rear

rennline

Fits
Porsche 981 Boxster / Cayman
Porsche 718 Boxster / Cayman
Porsche 991
Porsche Panamera
Porsche-718 All (17+)
Porsche-981 Boxster S 3.4 (13+)
Porsche-981 Boxster Spyder (15+)
Porsche-981 Cayman (13+)
Porsche-981 Cayman GT4 (15+)
Porsche-981 Cayman S (13+)
Porsche-991 3.4 Carrera (11+)
Porsche-991 3.8 Carrera S (11+)
Porsche-991 GT3 (13-16)
Porsche-991 GT3 Cup (13-16)
Porsche-991 Turbo (13+)
Porsche-991.2 (17+)
Porsche-991.2 GT3 (17+)
Porsche-Panamera All (10+)


Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours are the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• 300 series stainless steel tow loop
• Red "TOW" Graphic
• Go Pro Camera mount compatible (Mount sold Separately)

Note: Pictures may not show actual product.
Best Price
Rennline Folding Tow Hook. Porsche 911/964/993/996/997/Boxster/Cayman/944T/968
Code: E19208
Rennline Folding Tow Hook.

rennline

Fits the front of 964/993/996/997/Boxster/Cayman/944T/968 and the rear of 964/993/964/993/996/997 and 911's with factory screw in reciever
Note: The threads on this screw are the special factory Porsche thread.

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Also included is one red tow sticker. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. Why is ours the best:

• Ours is the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined and chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• Through bolt design - Some hooks on the market have bolts on each side resulting in very little thread contact causing hook failure.
• 300 series stainless steel
• Two Red Tow Stickers included
• Replaceable tow stickers available in several colors.

Note: Pictures may not show actual product.
Best Price
Rennline GoPro Camera Tow Hook Mount
Code: PH01
Rennline GoPro Camera Tow Hook Mount

Fits all Rennline Folding Tow Hooks

Go-Pro / Camera Tow hook Mount – In today’s racing and track events, cameras are everywhere. They have become a very valuable learning tool for you to get the most out of your track experience. One of the most exciting views you can capture is at bumper level. It gives you the true sensation of speed, especially when you are dicing in and out of traffic. Many people use(or did use) suction cup mounts to achieve this perspective. The issue’s with these are simple, they destroy paint, they fall off, and are gradually becoming banned from events do to the “Flying Debris” factor. Rennline’s camera mount eliminates all of these issues. It mounts directly to your Rennline folding tow hook, giving you the ultimate vantage point you require without effecting the functionality of the hook. Machined from billet aluminum and equipped with standard Go-Pro style attachment point. For a sample video click here. Note: GoPro Camera, Camera Case, Tow Hook, and thumb screw not included. This unit is designed to work with the newer style folding tow hook which uses one pivot bolt rather than two, to fasten the tow loop to the screw. Some grinding may be required if using the old style folding tow hook.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PH01
PH01

The product you are viewing cross references to these numbers
Best Price
Rennline GoPro Camera Tow Hook Mount
Code: PH05
Rennline GoPro Camera Tow Hook Mount
For REV2 Folding Tow Hook Only

rennline

In today's racing and track events, cameras are everywhere. They have become a very valuable learning tool for you to get the most out of your track experience. One of the most exciting views you can capture is at bumper level. It gives you the true sensation of speed, especially when you are dicing in and out of traffic. Many people use(or did use) suction cup mounts to achieve this perspective. The issue's with these are simple, they destroy paint, they fall off, and are gradually becoming banned from events do to the "Flying Debris" factor.

Rennline's GoPro Camera Mount eliminates all of these issues. It mounts directly to your Rennline folding tow hook, giving you the ultimate vantage point you require without effecting the functionality of the hook. Machined from billet aluminum and equipped with standard Go-Pro style attachment point.



Note: GoPro Camera, Camera Case, Tow Hook, and thumb screw not included. This unit is designed to work with the REV2 Folding Tow Hook only.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PH05
PH05

The product you are viewing cross references to these numbers
Best Price
Rennline Race Hook. UNIVERSAL
Code: E01X
Rennline Race Hook. UNIVERSAL
5, 6, 7, or 8 inch.

Rennline's steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events.

Note: Pictures may not show actual product.
Best Price
Rennline Rear Subframe Stabilizer with Tie Downs (Front & Rear). Porsche 986 Boxster / 987 Cayman / 987 Boxster
Code: E3235SB96
Rennline Rear Subframe Stabilizer with Tie Downs (Front & Rear).

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porschr 987 Cayman

Subframe Stabilizer:
Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation.

Front Tie Downs:
Securing a 986/987 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Additionally, Rennline has incorporated a much needed jack pad into the front tie downs that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Rear Tie Downs
These hooks have been specifically engineered to bolt to the rear of your 986/987 and come with any necessary hardware and installation instructions. Hooks are constructed of steel and powder coated red. Each kit comes with (2) rear hooks.

Note: Pictures may not show actual product.
Best Price
Rennline Rear Subframe Stabilizer With Tie Downs (Rear). Porsche 986 Boxster / 987 Cayman / 987 Boxster
Code: E35SB96
Rennline Rear Subframe Stabilizer With Tie Downs (Rear).

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes with the extreme loads being put on them. This negates your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation. Also available as a set including front tie downs, or as just the rear tie down set without the stabilizer bar.

Note: Pictures may not show actual product.
Best Price
Rennline Safety Sticker and Decal Kit
Code: E30
Rennline Safety Sticker and Decal Kit.

Rennline 34 piece vinyl decal kit fulfill the requirements of race regulations enforced by many race class governing bodies. This kit includes:

(8) Jack Point Decals
(12) Tow Decals
(4) Turn This Way decals
(2) Battery Disconnect Decals
(4) Neutral Safety Stickers
(2) Rennline Decal


Note: Pictures may not show actual product.
Best Price
Rennline strap style tow hook. Porsche 944 / 968 / 964 / 993 / 996 / 997 / Boxster / Cayman
Code: E308
Rennline strap style tow hook.

rennline

Fits
Porsche 944
Porsche 968
Porsche 911
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster /Cayman

Product Description

Introducing the latest in Rennline tow hook innovation: The Race Tow Strap. High strength base screw and Polyester strap design. Installs in minutes on most Porsche, BMW, MINI, Audi, or VW with factory screw type tow hook receptacles.
Designed to handle any off-track adventure quickly and reliably with a focus on safety and quality.

&bull: Can fit front or rear
• Aerospace grade 17-4 PH stainless steel base screw
• 100% Polyester strap with embroidered Rennline logo
• Highly visible Red webbing for quick identification
• Strap is UV resistant to protect against discoloration
• Boxed/cross stitched strap for strength and durability
• Triple layered webbing joint folds at high stress point of base screw for additional strength
• Folded strap at high stress attachment point to base screw for added strength
• Meets requirements for most organized race events requiring a 2" ID opening
Best Price
Rennline Sun visor GoPro mount for Porsche 991/991.2 & 981/718 Cayman
Code: PH07
Rennline Sun visor GoPro mount

rennline

Fits all models of
Porsche 991, 991.2, & Porsche 981/718 Cayman only. Does NOT fit Porsche 981/718 Boxster.

Never miss a moment with the Rennline Sun Visor GoPro mount! Easily attached to the visor, this mount allows you to capture every mile This GoPro Mount will complete your interior restoration and give your friends yet another reason to be jealous.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PH07
PH07

The product you are viewing cross references to these numbers
Best Price
Rennline Tie Down / Jack Plate FRONT. Porsche 997/996/Boxster/Cayman
Code: E32
Front Tie Down / Jack Plate.
FRONT

Fits:
Porsche 997
Porsche 996
Porsche Boxster
Porsche Cayman

Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts. Another great feature of these hooks are that Rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Each kit comes with:
- (2) front hooks
and all hardware needed for a 5 minute installation.

Note: Pictures may not show actual product.
Best Price
Rennline Tie Down / Jack Plate Set. Porsche 997/996/Boxster/Cayman
Code: E3204
Rennline Tie Down / Jack Plate Set.
FRONT & REAR

Fits:
Porsche 997
Porsche 996
Porsche Boxster
Porsche Cayman

Securing a 997/996 to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front and rear of your car without any modification . Another great feature of the front hooks is that Rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Hooks are constructed of steel and powder coated red.

Each kit comes with:
- (2) front hooks
- (2) rear 66° hooks
and all hardware needed for a 5 minute installation.

Note: Pictures may not show actual product.
Best Price
Rennline Tow Stickers (Pair)
Code: E33
Rennline Tow Stickers (Pair)

Replacement tow stickers for all Rennline tow hooks. Available in Red, Black, Yellow, Blue, Green, or Grey. Come as a set of two.

NOTE Stickers only, tow hook not included.

Note: Pictures may not show actual product.
Best Price
Rennline Universal Screw in Tow Hook Receiver
Code: E8110
Rennline Universal Screw in Tow Hook Receiver.

Note: Designed for use with screw in tow hooks part numbers E0509, E0609, OR E1309. Screw in tow hooks not included.

This tube receiver can be bolted in place and out of site using our optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. This particular mount allows for 7"-10" of adjustability depending which bolt holes are used. These receivers have no finish.

Note: Pictures may not show actual product.
Best Price
Rennline Universal Screw in Tow Hook Receiver
Code: E814
Rennline Universal Screw in Tow Hook Receiver.
Bolt On 90° Adjustable 1-4"

This tube receiver is designed for use with part numbers E85, E86, and E87. It can be bolted in place, out of site and then when needed, the screw in tow hook can simply be threaded into the threaded boss. This particular mount allows for 1-4" of adjustability depending which mounting holes are used.

Note: Designed for use with screw in tow hooks part numbers E05.09, E06.09, OR E13.09. Screw in tow hooks not included.

Note: Pictures may not show actual product.
Best Price
Rennline Universal Screw in Tow Hook Receiver
Code: E817
Rennline Universal Screw in Tow Hook Receiver.
Bolt On Adjustable 4"-7"

This tube receiver can be bolted in place and out of site using our optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. This particular mount allows for 4"-7" of adjustability depending which bolt holes are used. These recievers have no finish.

Note: Designed for use with screw in tow hooks part numbers E05.09, E06.09, OR E13.09. Screw in tow hooks not included.


Note: Pictures may not show actual product.
Best Price
Rennline Universal Screw in Tow Hook Receiver
Code: E82
Rennline Universal Screw in Tow Hook Receiver
Flat - Weld or Bolt on

This screw in tow hook receiver is designed to be bolted in place, out of site and then when needed, the screw in tow hook can simply be threaded in.

Note: Designed for use with Rennline's screw in tow hooks (part numbers E05.09, E06.09, OR E13.09). Screw in tow hooks not included.

Note: These have no finish

Note: Pictures may not show actual product.
Best Price
Rennline Universal Screw in Tow Hook Receiver
Code: E83
Rennline Universal Screw in Tow Hook Receiver
90° - Weld or Bolt on

Requires a screw tow hook E1309

This screw in tow hook receiver is designed to be bolted in place, out of site and then when needed, the screw in tow hook can simply be threaded in.
Note: Designed for use with Rennline's screw in tow hooks (part numbers E05.09, E06.09, OR E13.09). Screw in tow hooks not included.

Note: These have no finish

Note: Pictures may not show actual product.
Best Price
Rennline Universal Screw in Tow Hook Receiver
Code: E84
Rennline Universal Screw in Tow Hook Receiver
Universal 90° Base Plate

This Universal base Plate is designed to be bolted in place, out of site and then, when needed a screw in tow hook receiver with tow hook can be threaded into place (works with part numbers E81-4 and E81). This particular mount allows for 2-5" of adjustability depending which mounting holes are used.

Note: This is the base plate only; screw in tow hook, or receiver not included. Designed for use with screw in tow hooks part numbers E05.09, E06.09, OR E13.09, and screw in tow hook receivers part numbers E81-4, E81-10, OR E83.

Note: These have no finish

Note: Pictures may not show actual product.
Best Price
Rennline Universal Screw in Tow Hook Receivers
Code: E80
Rennline Universal Screw in Tow Hook Receivers

This tube receiver is designed for use with part numbers E85, E86, and E87. It can be bolted in place and out of site using our optional mounting brackets, and then when needed, the screw in tow hook can simply be threaded into the end of the tube. These receivers have no finish.

Note: Designed for use with screw in tow hooks part numbers E05.09, E06.09, OR E13.09. Screw in tow hooks not included.

Note: Pictures may not show actual product.
Best Price
DISPLAYING 1 to 25 (of 25 products)
You may also like
Popular Models