Zoom In

Carbon Air Filter Housing for Porsche 997 Turbo DesignTek

The finishing touch to any engine bay is the air filter housing, the DesignTek carbon version give that finish

Fits:
Porsche 997 Turbo

Zoom In

Adding bolt-on horsepower to the 997 Turbo is a continuous quest by many enthusiasts looking for more power. Reverting back to old tuning technologies, Agency Power has developed a larger throttle body and plenum kit for the Porsche 997 Turbo to gain added performance. The point of a larger throttle body is to get in more air.

The more air you bring in, the more power you make. The 997 Turbo's engine intake system works off pulses, so how that air is diverted to either side of the engine is not as important as the volume incoming. The plenum kit includes an OEM Porsche Cayenne Turbo throttle body (part# 94860511503) which is a direct bolt on and plug in for the electronic throttle control with no modifications needed.

This throttle body has a 77.64mm inner diameter compared to the stock one of 75.64mm. We chose to go with this smaller diameter throttle body to give the car more low end horsepower and torque. If the diameter of the throttle body is to big, it will increase turbo lag and performance gains will only be made at the mid to top end RPM range. Since most 997 Turbo users drive their car on the street and track, we developed this product to substantially increase throttle response and improve "usable" power.

The Agency Power plenum kit is made using high quality 6061 aluminum that has been TIG welded and pressure tested in a T shape to mimic the OEM design. The CNC machined 4 bolt throttle body flange features a groove to accompany a rubber o-ring to ensure a secure and sealed fit with the OEM Porsche Cayenne throttle body. The T plenum features the necessary fittings for stock vacuum hoses and breather lines and includes a 1 way check valve needed. Each T plenum is powder coated gloss black for an OEM look and includes new silicone couplers in black and worm clamps to secure it to the factory intake manifolds. The installation of the plenum requires removal of the factory airbox and Y pipe to access the component.

Installation of the Agency Power plenum kit DOES NOT require the ECU to be flashed. The factory ECU will adjust accordingly to the change in throttle body diameter. However, corresponding mods including an ECU flash will only bring out additional power. As it stands alone, the plenum kit will add a bolt on 20 wheel horsepower to your Porsche 997 Turbo. As tested on a VR700 kit, the plenum added nearly 45 horsepower and 60 ft/lbs of torque. Splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed.

Recommended installation time is approximately 3 hours.

HP Gains: 40-45Bhp. 60 ft/lbs of torque

Fits:
Porsche 997 Turbo

Zoom In

DesignTek Air Induction Kit System with Carbon Cover.

DesignTek has engineered the most complete cold air intake kit for the 2007 and up Porsche 997 Turbo and GT2. This cold air intake features components to help your car gain horsepower, improve throttle response, reduce turbo lag, and give your engine a more aggressive sound. With over 6 months of R&D and dyno testing, as well as 3000 miles of daily driving, this intake has been proven to gain almost 20 wheel horsepower and increase air flow while reducing intake temperatures. The natural 2 snorkel design of the 997 turbo engine helps bring in a larger volume of air flow to the intake box then the previous 996 Turbo. The limiting factor of the stock air box is the air filter and the volume of air the intake system can get in. With turbocharged cars, it is important to get a lot of air in while getting a lot of air out. By improving the air intake system, this is one step closer to achieving a more enjoyable performance vehicle.

The intake utilizes the stock MAF tubes which come apart easily from the factory intake box. They are connected to two aluminum intake pipes with K&N cone air filters. Each pipe is powder coated textured black for a clean OEM finish. All pipes are TIG welded and made from our original JIG to ensure precise fitment. The cone air filters provide plenty of flow for the turbo’s while the aluminum intake pipes keep the air flow smooth and laminar for proper MAF functioning. The left intake pipe requires a special fitting which we have CNC machined out of 6061 aircraft grade aluminum to fit on the return air hose. Each intake pipe is connected to the stock MAF tube via a 4ply DesignTek silicone coupler in black. Keeping the air flow circulating and cool, the intake is held in place by an aluminum heat shield that uses aluminum stands that drop into the rubber grommets on the frame for a secure fit. The heat shield is water jetted and then finished in textured black for an OEM look. The final touch of the air intake is the carbon fiber air box cover which securely connects to the aluminum intake shield. The air box helps keep air flow moving through the K&N cone filters with its increased volume over the stock unit. The carbon air box is flared out on either side to go with the contour of the incoming intake pipes. The back of the air box curves outward for a sleek look to fill in the area between the y-pipe and where the stock intake box would be. The carbon box fits seamless with the factory dual snorkels of the stock deck lid or GT2 wing.

Fits:
Porsche 997 Turbo

Zoom In

The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.

The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.

Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.

Unlike the 996 Turbo the 997 Turbo requires an “adaptation” period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.

The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.

Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.

Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum.

This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software. Beyond these performance mods we recommend upgrading to the larger 82mm IPD Turbo Plenum.

The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD “Y” Pipe.

Fits:
Porsche 997 Turbo

Zoom In

The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.

The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.

Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.

Unlike the 996 Turbo the 997 Turbo requires an “adaptation” period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.

The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.

Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.

Power obsessed Turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm “Competition” IPD plenum fitted with a factory 997 GT3 82mm Porsche throttle body (additional purchase required).

The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, Y Pipes and more aggressive software.

This larger version Plenum is also designed to perform with the higher flowing IPD “Y” Pipe.

997.1 Turbo Competition Plenum: HP Gains 30-35 / Torque Gains 35-40. Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body

Fits:
Porsche 997 Turbo

Zoom In

The revolutionary 997 Turbo IPD “Y” Pipe was built for the more demanding Turbo performance customer. This is not a cast reproduction of the factory Y pipe but a complete re-design from scratch, developed to deliver even greater air flow for both stock AND highly modified Turbos.

The factory Y pipe becomes restrictive when adding substantial power gains. The IPD “Y” Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo.

Bigger isn’t always better, and the IPD “Y” Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These “Y” Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine.

The IPD 997 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.

997.1 Turbo / GT2 Hi-Flow Y Pipe: HP Gains 15-20. Direct Bolt-in Replacement / No modification necessary

Fits:
Porsche 997 Turbo

Zoom In

Recharger Filter Care Service Kit (aerosol)

A six-step maintenance system designed to clean any K&N Filtercharger® Air Filter.

Restores air flow efficiency so your Filtercharger performs like new!

Includes:
6.5 oz. Spray Oil & 12 oz. Filter Cleaner

Please note this item can not be sent out by plane. Deliveries only to European countries by road service

In fuel injected engines, the throttle body is the part of the air intake system that controls the amount of air flowing into the engine, in response to driver accelerator pedal input in the main. The throttle body is usually located between the air filter box and the intake manifold, and it is usually attached to, or near, the mass airflow sensor.

The largest piece inside the throttle body is the throttle plate, which is a butterfly valve that regulates the airflow. Have a larger diameter throttle body produces more air flow with equals more power. The upgrades should be used in conjunction with the competition plenums.

This is a 82mm Thottle body.

Zoom In

New DesignTek air induction kit adds significant horsepower and torque improvement +28hp. 997 Twin Turbo air-intake system. Dual cone system for substantially better airflow and more sports car sound. Incredible sports car sound. simple bolt-on upgrade for all 997 Twin Turbos.

Fits:
Porsche 997 Turbo 2005>>

BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.


This Product Fits:


Porsche 997 Turbo 3.6L 2006>>

Panel Filter Size:
- width - 187mm
- height - 631mm