Hi Flow Air Filters

Designed to give 25% more air flow, which in turn gives more power.

Installing the cold air performance enhancement kit will make any standard 997 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 997 owner that wants his car to sound slightly more aggressive than stock.

The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.

The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.

No "Check engine" lights as you retain the factory MAF.

Kit Contains:
1 x Cold Air Hose
1 x Jubilee Clip 12mm 91-110
1 x Hose Screw Clamp 9mm 80-100
1 x Alloy Stopper plug

*Please add a K&N / BMC or DesignTek air filter with this kit as it is not included

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

INDUCTIONKIT10

The product you are viewing cross references to these numbers

Aluminum Intake Plenum "Competition" + Y-Pipe + 82mm Throttle Body Porsche 997 Turbo IPD


The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.

The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.

Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.

Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.

The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.

Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.

Power obsessed Turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm "Competition" IPD plenum fitted with a factory 997 GT3 82mm Porsche throttle body (additional purchase required).

The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, Y Pipes and more aggressive software.

This larger version Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.

997.1 Turbo Competition Plenum: HP Gains 30-35 / Torque Gains 35-40. Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body

Fits:
Porsche 997 Turbo

Aluminum Intake Plenum "Competition" 82MM + Throttle Body Porsche 997 Turbo IPD

The incredible 997 Porsche Turbo is the most revolutionary and capable Porsche Turbo to ever come out of Germany. The already explosive power can be further increased with the new 997 Turbo IPD Intake Plenums.

The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay over and above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most critical.

Maximum horsepower gains range from 30 to 35 depending on vehicle condition and pre-existing mods. The 997 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.

Unlike the 996 Turbo the 997 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or 10 to 50 miles of hard driving which of course IPD recommends only be performed on a closed circuit race track.

The 997 Turbo has an extremely sensitive ECU/DME making it prone to external environmental corrections so it is imperative that proper, adequate and consistent cooling be available when you dyno any of the 997 Turbos to get accurate and reliable dyno figures both before and after each test.

Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.

Power obsessed Turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm "Competition" IPD plenum fitted with a factory 997 GT3 82mm Porsche throttle body (additional purchase required).

The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, Y Pipes and more aggressive software.

This larger version Plenum is also designed to perform with the higher flowing IPD "Y" Pipe.

997.1 Turbo Competition Plenum: HP Gains 30-35 / Torque Gains 35-40. Requires upgrading factory 74mm TB with 997 GT3 82mm Throttle Body

Fits:
Porsche 997 Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

IPDKIT997TT

The product you are viewing cross references to these numbers

Aluminum Intake Plenum + 82MM Throttle Body + Induction Kit Porsche 996 / 997

Dyno tested power gains with our ECU remap archiving and extra +30Bhp To read more about this power increase Click Here

IPD
Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.

Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.

Induction Kit
Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive airbox and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected molded from crosslink polyethylene which has the lowest thermal conductivity rating of any single-layered moldable material available on the market today. This is key in keeping intake temperatures low and increasing power.

Fits:
Porsche 997 Carrera
Porsche 996 Carrera*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)

Aluminum Intake Plenum "Competition" 82MM + Throttle Body.

Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.

All of the IPD Plenums deliver substantial power and torque gains, but when combined with larger throttle bodies they perform even better. All of the IPD "Competition" Plenums utilize the next largest size throttle body offered by Porsche. In this case, the Competition Carrera upgrades the factory OE 74mm throttle body with Porsche's 82mm 997 GT3 throttle body. All of our Competition Plenums are designed to perform with cars equipped with high performance exhaust systems. The more extensive the exhaust system (headers, kats and mufflers) the better. Optimizing air intake and exhaust together creates a balanced performance package that allows the engine to inhale and exhale more air thus creating more power and torque.

IPD has pioneered another new Plenum design with the Competition Carrera Plenum. Laminar flows and volumetric efficiencies have been further enhanced with our unique and innovative internal merge collector area. This completely new approach has yielded not only great performance gains but more linear power delivery and improved throttle response as well. Gains vary depending on pre-existing mods and quality of after-market exhaust installed. As we all "should" know, horsepower and torque become harder to find and typically more expensive as we climb the proverbial performance ladder. That being said, performance components yield different power gains depending on the order they were installed. IPD tests and evaluates all products on bone stock cars, this establishes a level playing field and a better "apples to apples" comparison. The Competition Carrera Plenum however is designed to work with applications that are already moderately to heavily modified. Power gains will vary with each Carrera, but the bottom line is, there will be noticeable and impressive gains that are sure to make any Porsche Carrera driving enthusiast smile.

Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.

Requires upgrading factory 74mm TB with 997 GT3 82mm Thottle Body

Fits:
Porsche 997 3.8L S
Porsche 997 3.6L