Zoom In

Recharger Filter Care Service Kit (aerosol)

A six-step maintenance system designed to clean any K&N Filtercharger® Air Filter.

Restores air flow efficiency so your Filtercharger performs like new!

Includes:
6.5 oz. Spray Oil & 12 oz. Filter Cleaner

Please note this item can not be sent out by plane. Deliveries only to European countries by road service

Zoom In

At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.
High flow with excellent filteration.

This Product Fits:

Porsche Boxster (986) 2.5 09/96 - 09/99
Porsche Boxster (986) 2.7 08/99 - 01/05
Porsche Boxster (986) 3.2 S 08/99 - 01/05

Zoom In

Improving throttle response, horsepower, torque, and engine sound, the cold air intake for the Porsche Boxster is your answer to a better driving experience. Tested for air flow and MAF voltage readings, DesignTek has developed a check engine light free intake that is able to add performance to the Porsche Boxster. The all aluminum intake tube retains the factory diameter including our CNC machined 6061 aluminum MAF housing. Fitting up to the stock intake hose with no hassles, the filter then is secured behind our heat shield. The heat shield is built to separate the filter and the motor to keep the incoming air flow from the side intake duct a true Cold Air experience. The heat shield fits snuggly in place of the factory box and is made from light weight aluminum. The shield includes adjustable brackets which fit to the stock location.

As tested on a Boxster S using a Mustang all wheel drive dyno, the intake made a very respectable 5-7 wheel horsepower gain from 4000 to 6000 rpm with a peak increase of 2 wheel horsepower. The intake improved torque between 6-8 ft/lbs at the wheels from start to about 6000 rpm with a peak increase of 7ft/lbs. With a drive train loss of 15%, the intake will give your Boxster approximately a 9.2 crank horsepower gain.

The intakes include a K&N high flow cone air filter which is reusable for the life of the vehicle. The intakes come finished in a black powder coat.

Zoom In

K&N High Performance replacement air filter.
- High Air Flow with Excellent Filtration

- Designed to Increase Horsepower and Acceleration
Washable and Reusable

- Lasts up to 50,000 miles before cleaning is required depending on driving conditions

- Works with Original Equipment Manufacturer Vehicle Electronics

- Environmentally Friendly, K&N Reusable Air Filters

This Product Fits:


Porsche 986 Boxster 2.5L 1996-99
Porsche 986 Boxster 2.7L 1999-05 (220 & 228PS)
Porsche 986 Boxster S 3.2L 1999-05 (Excl. 280PS)

BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.


This Product Fits:


Porsche Boxster 986 / 986 S


Panel Filter Size:
- width - 178mm
- height - 244mm