Rear Spoilers / Aerofoil

Aluminium Black Mesh 'Diamond' Style - Mesh size: 100cm x 40cm Universal Product

Product description:

- Piece of powder coated mesh grill in size 100cm x 40cm
- Brand new product as shown in the photo below
- Hole size: 6mm x 4mm
-Thickness: 2mm
- Ideal for mounting in Bumpers, Bonnet intakes etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950555555

The product you are viewing cross references to these numbers

Bi-Plane Rear Spoiler Type GT for improved down force and aerodynamics. 997.2 Turbo Aerokit Look spoiler.
Made from high grade GRP material.
Does not include fixings and 3rd brake light. Reuses the existing stop light.

Fits:
Porsche 996 Carrera (not for Cabriolets)
Porsche 996 C4S* 
* It is possible to fit this on C4S model but you will need to remove the centre reflector. The lid will not follow the curves of the rear indicators (bottom red section) like the reflector does.


This is a fibre glass after market products and will require preparation before fitting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651222196GRP

The product you are viewing cross references to these numbers

Grille insert for 996 Duct tail



Fits:
Porsche 996 1998-05 fitted with P996 Ducktail

The vanes were angled to be as non-restrictive as possible to the air path into the engine bay. This means that the engine and air inlet are essentially open when viewed from the front but closed when viewed from the rear, which is good to keep falling leaves out.

The material we chose for the grille was ASA (Acrylonitrile-styrene-acrylate) which prints neatly and can withstand prolonged temperatures of up to 100C. This is more than any engine grille should ever see unless the engine is on fire. In terms of toughness it's on par with ABS but has the added benefit of being UV resistant.

Rear Duck Tail (Ducktail) Spoiler. This spoiler will accommodate to re-fit the original C4S Centre reflector.

Material: Fibre Glass



Fits:
Porsche 996 C4S 2001-05 Coupe only
(will not fit 996 Turbo or Standard 996)

Note: Requires 3rd brake light 99763105201 - bought separately

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) RS style Porsche 996 (Not Turbo, GT3 or GT2)

O/E fitment Porsche 996 Ducktail Spoiler. Ducktail can be fitted in 10 minutes and subtly transforms the look of you 996.  These come in raw finish and will require priming and painting. Any marks, blemishes or imperfections should be dealt with prior to applying primer and topcoat.

These spoilers weigh approximately 1.8kg more than the original flat deck lid without the Ducktail.

Disclaimer: By completing the purchase of this part, you accept all responsibility for any damage caused during the fitting or finishing process.  

Fits:
Porsche 996 1998-05
Not Turbo, GT3 or GT2

Please note: As most after market panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear spoiler / Rear wing. Porsche 911 (996)

• Vehicle-specific TÜV parts certificate
• Mounting accessories, if required
• assembly Instructions
• Rear spoiler is made of the innovative and high-quality material
• Uniform surface structure allows painting without much preparatory work (Product is not painted)
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Rear Spoiler Rubber Wall.
please note you may also require new clips order 2 x part number 99959171240

Fits:
Porsche 996 Carrera 1998-05
Porsche 997 Carrera MKI 2005-08
Porsche 997 Carrera MKII 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 5.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651225000

The product you are viewing cross references to these numbers

Replica rear spoiler & boot lid. made to look like 996 GT2 rear spoiler. made from epoxy resin for higher strength. Made with OE hinges so it allows the top wing to tilt.



Fits:
1. Porsche Original 996 Carrera - Coupe
2. Porsche Original 996 C4S - Coupe
3. Porsche Original 996 Turbo - Coupe


Material:
Made from Fiber Glass. GRP

Product Type:
Replica

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

996512996

The product you are viewing cross references to these numbers

Turbo look rear spoiler. fits standard body 996 Carrera C2/C4 or 996 C4S. This spoiler will be in the fixed rised postion.

Fits:
Porsche 996 1997-04

Material:
Made from Fiber Glass. GRP

Product Type:
Replica

Special order product please allow about 14 days for delivery.

Rennline engine lid spoiler carbon fibre. 



Fits:
Porsche 996 Carrera 2 / Carrera 4 - 1997 to 2005
Porsche 996 C4S - 2001 to 2005

Product Description

Rennline’s new ducktail spoiler is a great way to give your 996 an OEM+ look with a modern spin on the classic Porsche design. Made from high-quality hand laid carbon fiber using state of the art manufacturing techniques for a factory fit and finish.

• High quality construction, using the latest technologies
• Carbon Fiber is hand laid with a high gloss UV protectant finish
• CAD designed using 3D scans of the factory decklid
• Uses pre-installed industrial grade 3M VHB adhesive to install
• OEM fit and finish

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E359

The product you are viewing cross references to these numbers