Rear main oil seal installation tool. Porsche 986 / 987 / 997 - 0PB105249
Code: 0PB105249/3
Rear main oil seal installation tool.
Fits
Fits
Porsche 986 Boxster 2.5lrr / 2.7ltr
Porsche 986 Boxster S 3.2ltr
Porsche 987.1 Boxster / Cayman 2.7ltr
Porsche 987.1 Boxster / Cayman 2.9ltr
Porsche 987.1 Boxster S / Cayman S
Porsche 987.1 RS Spyder
Porsche 996 Carrera 2 / Carrera 4
Porsche 996 Carrera 4S
Porsche 997.1 Carrera 2 / Carrera 4
Porsche 997.1 Carrera 2S /Carrera 4S
This special service tool was developed for the correct installation of the rear main oil seal.
Trying to do this task with any other method is risking engine damage by the way of a damaged rear main seal
German made
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
£197.90
Now £193.94
In stock 
Related products
Mounting bolt kit for engine & gearbox stand
Code: SR028
Mounting bolt kit for engine & gearbox stand
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
£65.36
Now £64.05
In stock
Connector removal tool - for VAG, Porsche
Code: 6547
Connector removal tool - for VAG, Porsche
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6547
The product you are viewing cross references to these numbers
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6547
6547
The product you are viewing cross references to these numbers
£31.75
Now £31.11
In stock
Connector removal tool long series - for VAG/Porsche
Code: 7859
Connector removal tool long series - for VAG/Porsche
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7859
The product you are viewing cross references to these numbers
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7859
7859
The product you are viewing cross references to these numbers
£19.46
Now £19.07
In stock
