Ignition Lead High Performance
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 356 A, B, C, SC 1955-65
Porsche 912 1965-69
Cable sets are available in: red, black, orange, yellow, blue, purple and silver,
NOLOGY develops high-performance ignition cable sets using the condenser principle. These ignition cables result in a strong, short ignition spark. The potential results are astonishing - especially for engines with a very high compression or turbo charge.
All ignition cable sets come fully assembled with the appropriate connectors for the respective vehicle.
To ensure neat installation of the cables the sets always include cable clips.
Delivery approximately 20 days.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1148401
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 914 1.7L 1970-76
Porsche 912E 1.8L 1976
Cable sets are available in: red, black, orange, yellow, blue, purple and silver,
NOLOGY develops high-performance ignition cable sets using the condenser principle. These ignition cables result in a strong, short ignition spark. The potential results are astonishing - especially for engines with a very high compression or turbo charge.
All ignition cable sets come fully assembled with the appropriate connectors for the respective vehicle.
To ensure neat installation of the cables the sets always include cable clips.
Delivery approximately 20 days.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1148402
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 Carerra 3.2L 1984-89 (Motronic)
Porsche 964 (965) Turbo 3.3L 1991-92
Cable sets are available in: red, black, orange, yellow, blue, purple and silver,
NOLOGY develops high-performance ignition cable sets using the condenser principle. These ignition cables result in a strong, short ignition spark. The potential results are astonishing - especially for engines with a very high compression or turbo charge.
All ignition cable sets come fully assembled with the appropriate connectors for the respective vehicle.
To ensure neat installation of the cables the sets always include cable clips.
Delivery approximately 20 days.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1148602
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) TURBO 3.3L 1991-93
Fits:
Porsche 911 E/T/S / 914-6 1965-73 (Non-CIS Injection)
Cable sets are available in: red, black, orange, yellow, blue, purple and silver,
NOLOGY develops high-performance ignition cable sets using the condenser principle. These ignition cables result in a strong, short ignition spark. The potential results are astonishing - especially for engines with a very high compression or turbo charge.
All ignition cable sets come fully assembled with the appropriate connectors for the respective vehicle.
To ensure neat installation of the cables the sets always include cable clips.
Delivery approximately 20 days.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1148600
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 S 2.7L / 911 SC 3.0L 1973-83 (CIS Injection)
Porsche 930 TURBO 3.0L / 3.3L 1975-89
Cable sets are available in: red, black, orange, yellow, blue, purple and silver,
NOLOGY develops high-performance ignition cable sets using the condenser principle. These ignition cables result in a strong, short ignition spark. The potential results are astonishing - especially for engines with a very high compression or turbo charge.
All ignition cable sets come fully assembled with the appropriate connectors for the respective vehicle.
To ensure neat installation of the cables the sets always include cable clips.
Delivery approximately 20 days.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1148601
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 2.0ltr - 1964 to 1968
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT lead and 1 x coil lead (king lead)
Coil lead (king lead) is 20.75 inches long - Please check original item.
Leads are black
Conventional DIN fitting on the coil. Only to be used with original type coil
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation.
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6792
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Ignition HT lead set, 7mm Electrosports.
Fits:
Porsche 911 T / E / S 2.2ltr - 1970 to 1971
Porsche 911 T / E / S 2.4ltr - 1972 to 1974
Ignition HT lead set for an unmodified engine with the coil in its fan housing original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead is 9.5 inches long - Please check original item.
HT lead set comes in black
Conventional DIN fitting on the coil. Only to be used with original type coil
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
67217
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 3.2 Carrera - 1984 to 1989
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead (king lead) is 21.5 inches long - Please check original item.
HT lead set comes in black
SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.on HT lead set, 7mm Electrosports.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6714
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Ignition HT lead set, 7mm Electrosports.
Fits:
Porsche 911 SC 3.0ltr - 1978 to 1983
Porsche 911 turbo 3.0ltr - 1975 to 1977
Porsche 911 turbo 3.3ltr - 1978 to 1989
For cars with K-Jetronic fuel injection only
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead is 9.5 inches long - Please check original item.
HT lead set comes in black
Conventional DIN fitting on the coil. Only to be used with original type coil
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6704
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
NOLOGY develops high-performance ignition cable sets using the condenser principle. These ignition cables result in a strong, short ignition spark. The potential results are astonishing – especially for engines with a very high compression or turbo charge. They are the ideal complement for our HKZ boxes since they provide a further increase in the ignition voltage and ensure undiminished transfer to the spark plugs.
- Air Mass/Flow Sensors
- Alternator / Generator
- Batteries & Chargers
- Cold Start Valve
- Distributor
- Distributor Cap
- Rotor Arms / Point Sets
- Relays / Fuses
- Ignition Coil
- Ignition Control Units
- Ignition Lead Sets
- Injectors
- Starter Motors
- Warm-up Regulator
- Fuel Pressure Regulator
- Idle Control Valve
- Fuel Pump
- Fan / Temperature Switch
- Temperature Sensor
- Speed / Reference / Knock Sensors
- Wiring Harness / Cables
- Throttle Body