Manifold / Headers

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (none Turbo)
Porsche 993 All
Porsche 996 (none Turbo)
Porsche 997 (none Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS12

The product you are viewing cross references to these numbers

Exhaust Racing Heat Exchanger without heating function, Ø45 mm outside. Fits 91122092212 directly with use of exhaust tube 91133092213. Parts no 91122091021 needed for use with standard exhaust. Stainless steel.



Fits:
Porsche 911 T/E/S (not mech. injection) 2.0-2.4L 01/1963-07/1973
Porsche 911 S 2.4L 08/1971-07/1973
Porsche 911 S (mech. injection) 2.4L 08/1971-07/1973
Porsche 911 S (mech. injection) 2.7L 08/1973-07/1975
Porsche 911/911 S/911 Carrera 2.7L 08/1973-07/1975

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

16231019

The product you are viewing cross references to these numbers

Exhaust racing tube without heating function. Ø 38 mm outside.
Replacing heat exchangers. Painted chrome steel.



Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76

Left or right side
Select below. Price is for each one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9112209101

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (non Turbo)
Porsche 993 All
Porsche 996 (non Turbo)
Porsche 997 (non Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-In-12

The product you are viewing cross references to these numbers

Racing exhaust system.

Enhance power and sound with this DANSK racing exhaust system. This free flow kit will increase the sound of your boxer engine and provide instant satisfaction.
NOTE: This system is LOUD!!



Fits:
Porsche 911 2.0L-2.7L 01/1963-07/1973

Equipment Variant: Competition
Surface: Painted

Header:
Outer: ø45mm
Inner: ø42mm

Muffler:
Inlet: ø65mm (inner)
Outlet: ø75mm (inner)

Distance between outlet tubes:
Measured from the middle tube to middle tube: 740mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1620000610

The product you are viewing cross references to these numbers

Racing header set without heating function, with pipes to connect to standard exhaust with 2 inlets, Ø 45 mm OD outside. Stainless steel.
The 3 pipes from the engine are 42mm ID inside, and the pipes that connects are 47mm ID inside.



Fits:
Porsche 911 2.0L to 2.7L - 1965 to 1977

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1620101010

The product you are viewing cross references to these numbers

DesignTek Porsche 911 header is made of stainless steel. These are a direct replacement for the heat exchangers on 1965-74, but it will also work on 1975-1989 911 by replacing the necessary hardware (e.g. muffler, oil lines). Our header is designed to increase the efficiency of the gas flow and thus to raise the horsepower of the engine. It is also made of stainless steel to improve durability, and the flanges are CNC machined to enhance stability. Our header is designed to be direct bolt-on for easy installation. This header set includes 1 pair of headers, gaskets, and bolts/nuts for installation. **

Fits:
Porsche 911 2.0/2.2/2.4/2.7/3.0L
Racing or Street RSR
Porsche 911R
Porsche 911RS

Specification
• Material: stainless steel
• Tube Diameter (OD): 1 1/2"
Features Highlights
• Direct bolt-on to increase horsepower
• Strong and durable
• Gaskets/bolts/nuts are included for easy installation

**Professional installation is recommended
**A break-in period of 500 miles is required after the installation

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309111

The product you are viewing cross references to these numbers

DesignTek Porsche 911 header is made of stainless steel. These are a direct replacement for the heat exchangers on 1965-74, but it will also work on 1975-1989 911 by replacing the necessary hardware (e.g. muffler, oil lines). Our header is designed to increase the efficiency of the gas flow and thus to raise the horsepower of the engine. It is also made of stainless steel to improve durability, and the flanges are CNC machined to enhance stability. Our header is designed to be direct bolt-on for easy installation. This header set includes 1 pair of headers, gaskets, and bolts/nuts for installation. **



Fits:
Porsche 911 2.0/2.2/2.4/2.7/3.0L
Racing or Street RSR
Porsche 911R
Porsche 911RS

Specification
Material: stainless steel
Tube Diameter (OD): 1 5/8"
Collector Diameter (OD): 2"
Features Highlights
• Direct bolt-on to increase horsepower
• Strong and durable
• Gaskets/bolts/nuts are included for easy installation

**Professional installation is recommended
**A break-in period of 500 miles is required after the installation

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (none Turbo)
Porsche 993 All
Porsche 996 (none Turbo)
Porsche 997 (none Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-121

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 3.0L SC
Porsche 911 3.2L 1984-89
Porsche 930 turbo
Porsche 965 turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-122

The product you are viewing cross references to these numbers