Carburetors & Parts
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Installation Packages are suitable for Porsche 911 - 3.2L engines (Model Years 1986-1989).
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Anodised Aluminium Inlets/Extensions suitable for flatdeck & ducktail models.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU GP Lite patch harness including base map package - Comes complete with electrical patch harnesses, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01
Parts are in silver. The contents of these kits may vary, from the images provided
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Installation Packages are suitable for Porsche 911 - 3.2L engines (Model Years 1986-1989).
Kits are made in Silver
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Anodised Aluminium Inlets/Extensions suitable for flatdeck & ducktail models.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU GPA full harness including base map package - Comes complete with electrical full harnesses, hardware, and software.
• Fueling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01
Parts are in silver. The contents of these kits may vary, from the images provided
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Installation Packages are suitable for Porsche 911 - 3.2L engines (Model Years 1986-1989).
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Anodised Aluminium Inlets/Extensions suitable for flatdeck & ducktail models.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Air Filtration System - Includes Megaflow Air Filters complete with brushed aluminium pre-drilled Filter back plates.
Supporting parts that create these Full Plug, Play and Tune - Installation Kits:
• ECU including base map package - Comes complete with electrical patch harnesses, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off & idle air control assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01
Parts are in silver. The contents of these kits may vary, from the images provided
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 356 / 356A / 356B / 356C - 1950 to 1965
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 928 - 1978 to 1995
Porsche 914 - 1970 to 1976
The N0155213 Ball Socket for Carburetor Linkage is a precision-engineered component designed for use in various Porsche models, including the iconic Porsche 356, 911, 964, 928, and 914. This finely crafted ball socket plays a crucial role in the functionality of the carburetor linkage system.
Specifically, the 5mm ball socket serves as a pivotal connection point within the carburetor linkage, facilitating smooth and responsive throttle control. It ensures a precise and direct link between the throttle mechanism and the carburetor, allowing for optimal fuel and air mixture regulation. This level of precision is essential for achieving peak engine performance, responsiveness, and overall driving experience.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
N0155213
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Anodised Aerospace Grade 6082/T6 Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Anodised Aluminium Inlets/Extensions suitable for flatdeck & ducktail models.
• Aluminium Ram Pipes & Assembly Tool.
• Throttle Position Sensor (TPS).
• Billet Aluminium Fuel Rails, Including PICO 377cc Fuel Injectors.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
you will need an EFI Installation & control kit which is not included
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00086-01 The contents of these kits may vary, from the images provided
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
102-102-00239-01
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 911 1965-89
Product Specifications:
Part Number: E-3671
Product Style: Oval Air Filter
Air Filter Shape: Oval
Height: 3.25 in (83 mm)
Inner Wire: No
Inside Length: 10.75 in (273 mm)
Inside Width: 4 in (102 mm)
Outside Length: 12 in (305 mm)
Outside Width: 5.25 in (133 mm)
Top Style: Open
Top Material/Finish: None
Filter Material: Cotton Gauze
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-3671
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
This Product Fits:
Porsche 911 with carbs
K&N brand air filter, part number 56-1240 which is now 56-1770-1 this is for Weber 40/46 IDA (Triple carb) as fitted to Porsche 911.
K&N Custom Air Filter kits are designed to allow the maximum performance from your carburettors, yet keep the dirt on the outside where it belongs. These assemblies come with top and base plates and the famous K&N High-Flow Washable Air Filter.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
56-1770-2
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits
Porsche 911 - Air cooled engine with Weber Carburettors
Kit Includes
Please see the PMO vs OE Carb Overview
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
A carburetor (American and Canadian spelling), carburator, carburettor, or carburetter (Commonwealth spelling) is a device that blends air and fuel for an internal combustion engine.
- Engine Rebuild Kit
- Gaskets & Sets
- Radial Seal / RMS / Camshaft / Balance shaft
- Intermediate shaft (IMS)
- Oil System Parts
- Fuel System Parts
- Belts / Tensioners / Rollers
- Chains & Tensioners
- Timing covers and gaskets
- Engine Bearings / Shells
- Engine Valves / Guides / Springs
- Rocker Arms & Tappets
- Engine Bolts / Studs
- Piston Rings
- Engine Cylinders / Liners / Pistons
- Connecting Rod
- Cylinder Head / Camshaft Carrier
- Camshaft covers / Gaskets
- Camshafts
- Camshaft gears / sprockets and fixings
- Crankcase Parts
- Crankshaft & Parts
- Engine Tinware
- Engine Mounts
- Turbo Chargers / Intercoolers & Parts
- Air Intake & Injection
- PMO Carburetors
- Vacuum Pump
- Direct-to-Head Throttle Bodies
- Jenvey Throttle Bodies
- Specialist Tools