Fire Extinguisher Mounts
Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 944
Porsche 928
Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike most fire extinguisher mounts available, all of Rennline's mounts install directly to the factory seats and do not compromise seat travel or leg room in anyway. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included. This particular mount fits power seats including seats with manual forward/back but power up/down. Fire extinguisher not included.
Note: Pictures may not show actual product.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Fits:
Porsche 911/912 65-73
Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike any extinguisher mount on the market, this two-piece design allows you to remove all visible components in seconds to revert to a factory look. While other rail mount systems are fixed and limit your seat travel, our EZ-Adjust Slider allows you to make a wide range of seat adjustments on the fly. Installs in minutes and is designed to fit all types of seats, from lightweight manual race seats to the most complex electric seats from Porsche. Includes Fire Extinguisher Mount and hardware. Fire extinguisher and fire extinguisher quick disconnect not included.
FE12 Not Included but available below.
• 2-piece design
• Easy-to-remove components
• EZ-Adjust Slider for seat adjustment
• Installs in minutes
• Fits wide variety of seats
*Actual product may vary from image
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fire Extinguishers are sold separately.
If your car is on fire, the last thing you want to do is fumble with clamps and brackets found on traditional fire extinguisher mounts. In these critical moments the Rennline Fire Extinguisher Quick Release can mean the difference between a minor incident and a total loss. This mount is equipped with Rennline's exclusive Detent Release System (DRS) resulting in the smoothest, most precise operation possible. Designed with the racetrack in mind, our Quick Release is a true metal-to-metal mount which meets all sanctioning body requirements and works with all 3 inch extinguishers. Fully CNC machined from aerospace grade aluminum and assembled with stainless steel hardware, they are designed as a direct bolt on for all Rennline and most aftermarket fire extinguisher mounts.
Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. This particular mount is specifically designed with race seats in mind. It is fully adjustable in height, width, length, and angle, allowing you to mount it on virtually any race seat configuration. For seats mounted to sliders, this brackets can be mounted to the top side of the slider allowing the extinguisher to move with the seat. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included.
For installation instructions CLICK HERE
- Engine Modifications & Upgrades
- Electronic Fuel Injection Throttle Kits
- IRIDIUM POWER Spark Plugs
- Hi Flow Air Filters
- Air Induction Kits
- Short GearShift Kits
- Turbo Chargers
- ECU Reader / Fault Finder
- Exhaust Packages
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Alloy Block Off Plates
- Clutches / Flywheels / Hydraulics
- Track & Race Coolant Radiators
- Wössner Forged Piston Kit
- CP Carrillo Connecting Rods
- Retro Performance Pistons and cylinders
- Brake Hoses Stainless Steel Goodridge