Spring Plate
Front and Rear axles
Fits:
Porsche 911- 1977 to 1986
Porsche 911 turbo - 1977 to 1988
Suspension bush rebuild kit using standard shore rating (not uprated)
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Front and Rear axles
Fits:
Porsche 911 turbo - 1989 - G50 gearbox
Suspension bush rebuild kit using standard shore rating (not uprated)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 (73-89)
Porsche 924S
Porsche 944
Porsche 968
12-piece bolt set for the rear axle of various Porsche models.
The original screws are often rusted tight and wrench flats rarely survive disassembly without damage. Here you get a new set of screws.
Can be used on both sides (Left and Right).
Reference numbers:
91133330301, 91133330501, 91133330501, 90036000701,
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133330300
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Price is each.
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95
Click 'Zoom in' for large parts diagram.
Diagram ref no 19
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133330501
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 911 Turbo 1978-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033101002GRV
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
Includes 4x Heavy Duty rubber softness spring plate bushings (w/ 80-85 shore A)
Outer dia: 75mm
Inner dia: 48mm
Thicknes: 42mm
Fits:
Porsche 911 1968-89
Porsche 912 1968-69
Porsche 912 1976
Porsche 930 1978-79
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133300900BHD
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Includes 4x Standard rubber softness spring plate bushings (w/ 55-60 shore A)
Outer dia: 75mm
Inner dia: 48mm
Thicknes: 42mm
Fits:
Porsche 911 1968-89
Porsche 912 1968-69
Porsche 912 1976
Porsche 930 1978-79
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133300900B
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133330301
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Price is each.
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133330301
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Price is each.
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95
Click 'Zoom in' for large parts diagram.
Diagram ref no 19
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133330501
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Price is each.
Fits:
Porsche 911/912 1965-89
Porsche 911 (930) 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 28
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313305
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price is each.
Fits:
Porsche 911/912 1965-89
Porsche 911 (930) 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 28
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313305
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
M 12 x 1,5. Price is each.
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 25
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313306
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
M 12 x 1,5.
Price is each.
Fits:
Porsche 911 1974-89
Porsche 911 (930) Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 25
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133313306
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
SET OF 2 Left & Right
Fits:
Porsche 911 1987 to 1989 with G50 Gearbox
Porsche 911 turbo 1989 with G50 Gearbox
Replace the rusty, worn, rear spring plates with this new item.
Spring plates and bushes are designed for quick adjustment.
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133300906
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-89
Porsche 930 1975-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133315300
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-89
Porsche 930 1975-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 29
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133315300
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Spring plate normally rust, replacing them will give you a better ride.
Fits:
Porsche 911 1974-86 915 Gearbox
Porsche 911 Turbo 1975-89
Price is Each
Click 'Zoom in' for large parts diagram.
Diagram Ref No.16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133300905
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Replacement for Porsche parts No. 91133300900
SET OF 4
Fits:
Porsche 911 1974-89
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Click 'Zoom in' for large parts diagram.
Fits to No. 16 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SPF0242K
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits to spring plate OEM part number 90133300309
/ 90133300301.
SET OF 4
Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)
Fits to No. 16 on the diagram.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-409
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits to spring plate OEM part number 90133300309
/ 90133300301.
SET OF 4
Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)
Fits to No. 16 on the diagram.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-409BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits to spring plate OEM part number 90133300309
/ 90133300301.
SET OF 4
Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)
Fits to No. 16 on the diagram.
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-409H
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Replacement for Porsche parts No. 91133300900
SET OF 4
Fits:
Porsche 911 1965-89
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Click 'Zoom in' for large parts diagram.
Fits to No. 16 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SPF0236K
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 / 930 / 912 / 914 1965-89
Give those rear spring plates a much needed refresh and upgrade with our new bushing kit. Complete with machined billed aluminium housings and designed to reduce drag, improve handling of your street or track driven 911, and built with longevity and durability in mind. Replacing the rubber bushings with Delrin will retain optimal suspension geometry throughout the full range of motion while reducing compliance for a more direct feel.
Bushing housings CNC machined from 6061-T6 Aluminium
Close tolerance design for added rigidity
Durable anodized finish resists corrosion
Low friction Delrin bushing inserts
Stainless steel bushing race & hardware
Bushing race installation tool included
Direct replacement of the OEM bushings & housings
Outlasts factory components
Engraved Rennline logo
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold in sets of (4), enough for both sides of one car.
Fits:
Porsche 911/912/930 ALL 1965-89
Gain back ride quality and rear end stability with High Density Rear Spring Plate Bushings for your 911. Under prolonged use, especially when driven hard, the OEM bushings can break down allowing more slop in the rear suspension. If neglected long enough or driven under heavy load enough, these bushings will eventually deform allowing the spring plate to contact the cover plate. Replacing your factory bushings with our 25% stiffer units will allow full and smooth articulation of the spring plate, thus improving the ride quality and performance of the legendary rear end in your classic 911. Featuring a higher, "sport" durometer these rubber mounts are a great compromise between soft factory mounts and solid/spherical bearings often used to replace them.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133300309
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930 1965-89
AL trailing arms only
Rear CamberMax kit simplifies 911 rear camber adjustment, making it easy to achieve aggressive negative camber settings of 3+ degrees. Instead of using the troublesome factory eccentric bolt, Rear CamberMax allows adjustment with a simple and precise screw.
Unlike the stock eccentric adjuster, Rear CamberMax allows adjustment with vehicle weight resting on the tires making it easy to read a camber gauge while turning the adjuster.
By making equal adjuster turns on both driver and passenger sides, quick changes can be made trackside even if a camber gauge is not available – try that with the factory eccentric adjuster!
Note – Fits factory spring plates and AL trailing arms only. Does not fit Sway-a-way plates or steel trailing arms.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2130900
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 / 912 / 930 1969-89
with Aluminium trailing arms
Complete your Spring Plate Installation
While replacing spring plates, you'll often find that the hardware is worn and ready for replacement. We've assembled this kit as per factory specifications so you don't have to hunt and source the parts yourself.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2200000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 / 912 / 930 1969-89
with Steel trailing arms
Complete your Spring Plate Installation
While replacing spring plates, you'll often find that the hardware is worn and ready for replacement. We've assembled this kit as per factory specifications so you don't have to hunt and source the parts yourself.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2200001
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
For Porsche 911, 912, 930 1968-1989 Spring Plate SAW
PolyBronze bearings are superior to plastic bushing alternatives, here's why:
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.
PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.
The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.
PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.
✔ No squeaks or binding
✔ Extremely smooth ride quality
✔ Easier to install than rubber bushings
✔ Integrated grease fittings and grooves
Note – 1967 spring plate bushings changed mid-year. The following '67 chassis numbers transitioned to the late style '69-'89 style bushes.
• '67 911 from Chassis Serial Number 307 325
• '67 912 from Chassis Serial Number 354 938
• '67 911 S from Chassis Serial Number 305 101 A
All earlier '67 chassis numbers use the early '65-'66 style bushes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2061501
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1968-89 Spring Plate Stock
Want to experience precision driving, faster lap times, improved road feel and feedback?
Our patented PolyBronze suspension bearings set a new standard for performance, ride quality and ease-of-installation. Regular polyurethane/plastic suspension bushings are obsolete!
PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.
• No squeaks or binding
• Extremely smooth ride quality
• Easier to install than rubber bushings
• Integrated grease fittings and grooves
PolyBronze bearings are superior to plastic bushing alternatives, here's why:
Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.
PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.
The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.
NOTE:
1967 spring plate bushings changed mid-year. The following '67 chassis numbers transitioned to the late style '69-'89 style bushes.
'67 911 from Chassis Serial Number 307 325
'67 912 from Chassis Serial Number 354 938
'67 911 S from Chassis Serial Number 305 101 A
All earlier '67 chassis numbers use the early '65-'66 style bushes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2061500
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price is Each.
Fits:
Porsche 911 1987-89 G50 Gearbox
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133300906
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
1 kit required per car
Fits
Porsche 911 SWB - 1965 to 1967
Porsche 911 - 1967 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Stock Spec Spring Plate Bushes
A true stock spec bushing replacement for spring plates.
Spring plate bush condition can be accessed by looking at the hole in the spring plate cover. It should be concentric around the spring plate. When the bushings deform, the cover becomes non-concentric around the spring plate and in extreme cases actually contacts the cover plate – metal-to-metal.
More than just bushings, this is a full kit that includes inner and outer bushings (4 pcs), adhesive, instructions, long bolts to press in the bushings, and abrasive cloth to prep the surface.
Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution. Check our PolyBronze Bearings for a high-performance solution.
Also see our Bushings Removal Tool to simplify the removal of old bushings.
Notes – 1967 spring plate bushings changed mid-year
The following 1967 chassis numbers transitioned to the late style 1969-89 style bushes.
• 1967 911 from Chassis Number 307 325
• 1967 912 from Chassis Serial 354 938
• 1967 911 S from Chassis Serial 305101 A
All earlier 1967 chassis numbers use the early 1965-67 style bushes
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
229000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
2 Required per car. Price is EACH
Fits:
Porsche 911 1965 to 1986
Sport bushings – 30% harder rubber
Replace the rusty, worn, rear spring plates with this new, adjustable item.
Spring plates and bushes are designed for performance road and track use.
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133300309
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits
Porsche 911 1964 - 1989
Porsche 914-6
Combining 24mm and 36mm wrenches, the Rennline Spring Plate Wrench was designed to be slim enough to reach those tough places between the spring plate and the frame.
Manufactured from tool steel, the wrench holds up under heavy use while it's slim size solves a common problem with spring plate installation.
Compatible with Rennline Adjustable Spring Plates.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930 1965-1986
Available In Three Configurations
• For '65-'68 911/912, Short Wheel Base
• For '69-'86 911/912, '75-'86 930, Long Wheel Base
• For '69-'86 911/912, '75-'86 930, Splined Hub Kit
Change Torsion Bars and Adjust Ride Height
QuickChange spring plates make fast-work of torsion bar re-indexing and replacement. Screw-type adjuster makes corner balancing and ride height adjustment a breeze. Pairs the high quality of the factory design with ease of servicing.
• 5 minute torsion bar changes
• Fast and easy ride-height adjustment
• Accepts standard bushings
Setup is fast and easy
If you've ever re-indexed torsion bars to correct ride height, you can really appreciate the benefits of QuickChange. Used in combination with our QuickChange Torsion Bars and Polybronze bearings, this spring plate allows rapid replacement or re-indexing of torsion bars.
QuickChange Torsion Bar Changeout
QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
Unlike other aftermarket spring plates, QuickChange Spring Plates bolt the plates together. This prevents the plates "halves" from sliding against each other and eliminates failures and metallic clicking noises common with competing products.
Can be used with any torsion bar and bushing that fits factory spring plates – not included – however QuickChange Torsion bars and PolyBronze Bearings are required to use torsion bar extraction features.
Kits for '69-'86 long wheel base cars include a screw type height adjuster. Kits for '65-'68 short wheel base cars use an eccentric bolt height adjuster for improved tire clearance.
To add QuickChange functionality to your existing set of '77-'86 factory adjustable spring plates or ASP, you can order the Splined Hub separately.
Splined Hub Kits
The Splined Hub Kit includes the small plate and adjuster hardware to mate with the large plate from your donor set of factory adjustable spring plates, or the ASP. Order one kit per car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
208090
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1966-89 with rear coil overs
Porsche 930 Turbo
Porsche 912's with rear coil overs
Features & Quality
Our coilover-only spring plate system has the added features and thoughtful engineering you expect from Elephant Racing.
Rubber Seals
Rubber seals keep water and contaminate out of the oversized precision rod ends. Seals are critical to extend rod end life for both racers and street cars. Racers have the occasional "agricultural excursion", covering the suspension with grit and dirt that accelerates wear of unsealed rod ends. Street cars have occasional exposure to water when washing or in rain. Rubber seals are key to long life.
Build Quality
Skillful TIG welding and machined radius on the plate. Hard anodize burgundy aluminum parts are tough, attractive and look good on most any color car. Top quality materials throughout.
Hardened alloy steel blades and aircraft grade aluminum to handle even high HP turbos.
Precision, Oversize rod end – For long trouble-free performance.
Ease of adjustment
Drilled hole positively defines plate length ensuring proper thread engagement at double adjuster and rod end, preventing accidental over-extension possible with double-slotted designs.
Two Height Settings
Choose stock height or 1 inch raise for anti-squat geometry (requires matching raise of trailing ar
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
2 Required per car. Price is EACH
Fits:
Porsche 911 1987 to 1989 with G50 Gearbox
Porsche 911 turbo 1989 with G50 Gearbox
Replace the rusty, worn, rear spring plates with this new item.
Spring plates and bushes are designed for standard road use
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133300906
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
2 Required per car. Price is EACH
Fits:
Porsche 911 1987 to 1989 with G50 Gearbox
Porsche 911 turbo 1989 with G50 Gearbox
Replace the rusty, worn, rear spring plates with this new item.
Spring plates have harder bushes, designed for fast road, performance use.
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91133300906
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Anti Roll Bar
- Anti Roll Bar Bushes
- Anti Roll Bar Bracket
- Ball Joints
- Drop Links & Bushes FRONT
- Drop Links & Bushes REAR
- Shock Absorbers FRONT
- Shock Absorber Parts FRONT
- Shock Absorbers REAR
- Shock Absorber Parts REAR
- Track Control Arms FRONT
- Track Control Arm REAR
- Wheel Bearings & Kits
- Wishbones & bushes
- Torsion Bar
- Rear Trailing Arm
- Cross Member & Parts
- Wheel Hub / Carrier
- SuperPro Polyurethane Bushes
- Powerflex Heritage Collection
- Powerflex Black Series Bushes
- Powerflex Polyurethane Bushes