Air Induction Kits
This Product Fits:
Porsche 991 (911) 3.4L Carrera 2011>>
Porsche 991 (911) 3.8L Carrera S 2011>>
Porsche 991 (911) GT3 Mk1 and Mk2
Panel Filter Size:
- B: 271 mm
- A: 193 mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Performance Gain: 8-11hp, 8-10ft-lb
Flow Bench Data: Stock Intake 905 CFM : Eventuri Intake 1025 CFM
Fitment: Porsche 991.1 and 991.2 GT3 RS
The Eventuri 991 GT3 RS intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:
Each intake system consists of:
Carbon Fiber Double Venturi Filter Housing
Bespoke High Flow Dry Cone Filters
Carbon Fiber Inlet Ducts
Silicon Coupler Internally Stepped
Laser Cut Stainless Steel Brackets
The 991 GT3 RS Filter Housing comprises of 2 bespoke high flow filters, aluminium cowls, laser cut brackets and the carbon pod itself. The carbon pod shrouds the reverse mounted filters and smoothly shapes the airflow down to the throttle body. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patented design and a regular intake system. Further details can be read in the Technology page.
BESPOKE CONE FILTER
In order to achieve the highest flow rate possible we designed a filter element to make as much use of the space available in the engine bay as possible. This new filter has an outside diameter of 192mm or 7.6" and when flow tested with a housing using a 4" opening is able to flow up to 900 CFM at 28" H2O. The filter medium is ISO tested to ensure that filtration is in line with OEM standards and is also dry. The filter is constructed with our signature flow cones to aid in the Venturi housing principle.
CARBON DUCTS
The ducts channels ambient air from the side vents to the filter housing. In order to ensure a good seal against engine bay heat - they are secured to the filter housing at 3 points and use a neoprene gasket for an airtight seal . The ducts were designed to have the maximum internal volume possible within the given geometry of the engine bay. This ensures that the filter housing is able to draw with minimum restriction.
SILICON COUPLER
Our silicon coupler replaces the stock flexible tube to the throttle body. It matches the OEM throttle body with an internal step to ensure smooth flow.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EVE-GT3RS-INT
The product you are viewing cross references to these numbers
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits:
Porsche 997 GT3 Cup
Porsche 991 GT3 Cup
These restrictors mount over the front of the intake throttle body and under the intake boot.
Take Control with Our Restrictor Plate Kit
Harness the power of your vehicle with our Restrictor Plate Kit. It’s designed for the late 997 and 991 air filter system. These precision machined restrictors mount over the front of the intake throttle body and under the intake boot.
What’s Included in Your Purchase
Your purchase includes a set of 10 distinct restrictor plates. This array provides a variety of restriction options. Hence, you can fine-tune your vehicle’s horsepower to your exact needs. This ensures optimal performance for any scenario.
This includes a set of 10 plates that fit over the front of the throttle housing under the intake boot. Easy to install and easy to remove as needed.
Ideal for NASA GTS Preparations
Are you prepping for NASA GTS? Our Restrictor Plate Frame is the perfect tool for you. It allows precise horsepower calibration. Consequently, you can achieve your desired performance level each time. We’ve tested this plate frame on a 996 cup car with fantastic results. The horsepower reduced smoothly, and the air/fuel ratio remained unaffected.
Why Choose Our Restrictor Plate Kit
Our Restrictor Plates offers precise horsepower control. It’s a must-have for racing enthusiasts and those seeking to tailor their vehicle’s performance. Experience the difference of custom tuning with this reliable, efficient tool. Invest in our Restrictor Plates and experience the thrill of tailored performance today.
Fits all 997 Cup and all 991 Cup
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Can be adapted to various vehicles.
Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm
- Engine Modifications & Upgrades
- ECU Re-Mapping DIY
- Electronic Throttle Booster
- Hi Flow Air Filters
- Short GearShift Kits
- Performance Plenum
- ECU Reader / Fault Finder
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Track & Race Coolant Radiators
- Brake Hoses Stainless Steel Goodridge