Exhaust Tail Pipes
Fits to original rear muffler.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606409144
The product you are viewing cross references to these numbers
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
Fits to original rear muffler.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606409133
The product you are viewing cross references to these numbers
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
with polished finish
Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R
DOES NOT FIT 997
This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO99112.023.A
The product you are viewing cross references to these numbers
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
with titanium sandblasted finish
Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R
DOES NOT FIT 997
This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - SANDBLASTED TITANIUM
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO99112.023.T
The product you are viewing cross references to these numbers
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Made from titanium
Straight pipe replaces rear centre silencer
FITS 991.1 and 991.2
Porsche 911 GT3 and GT3 RS 2014-2016
Porsche 911 GT3 and GT3 RS 2017-2019
Porsche 911 R 2016
NOT FOR 997
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Replaces centre silencer and tailpipe trims
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - ROLLED LIP
Tailpipe with external rolled lip
OUTER PIPE DIMENSION - 65mm
CENTRE TIP DIMENSION 50mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - SANDBLASTED
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance
END TIPS NUMBER AND POSITION - 3 CENTRAL
The end tips emerge from the centre
MATERIAL - TITANIUM
KSTi -1,2 ASN titanium alloy was specifically developed for motorsport exhaust systems. It guarantees excellent resistance to oxidation even at high temperatures, with mechanical characteristics similar to those of grade 2 titanium.
CENTRE SILENCER REMOVAL
Complete removal of the centre silencer minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991GT317.001.T
The product you are viewing cross references to these numbers
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 GT3 4.0L
Fits to original rear muffler.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606409155
The product you are viewing cross references to these numbers
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)