Porsche > 996 (911) (1997-2005) > 996 C4S 3.6L 09/01-2005 > Engine Rebuild Parts >

Crankshaft & Parts

Bearing clearance gauge kit, Plastigauge

Code: PLASKIT

Bearing clearance gauge kit

Kit includes:
1 x Plastigauge PL-A box
1 x Plastiguage Mineral grease
1 x Plastiguage Silicone grease

PLASTIGAUGE PL-A is widely used in the measurement of clearance in plain automotive bearings. Measurement of clearance in big-end bearings can be achieved without dismantling the crankshaft.

3G Minerak Grease: To coat journal prior to use of Plastigauge
3G Silicone Grease: To apply to surface of shell

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PLASKIT

PLA007

PLA008

The product you are viewing cross references to these numbers

About this kit

Zoom in (3) Zoom in (3) Zoom in (3)

Bearing clearance gauge pack, Plastigauge.

Code: PLA007

Bearing clearance gauge pack
100 Plasigauge strips per box

plastigauge

PLASTIGAUGE PL-A is widely used in the measurement of clearance in plain automotive bearings. Measurement of clearance in big-end bearings can be achieved without dismantling the crankshaft.

For measurements of: 0.001″ to 0.007″ (0.025mm – 0.175mm)

Suitable for use at temperatures between 0°C and 35°C

Contents:

100 gauges (each 10cm in length)
Measurement reading cards (mm & inches)
Instructions
We highly recommend the use of Silicone and Mineral greases.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PLA007

PL-A

The product you are viewing cross references to these numbers

Zoom in (2)

Crankshaft carrier through bolt M9x127 (SET OF 14). Porsche 996 Carerra

Code: 99610111562/4

Crankcase main bolt M9x127, SET OF 14

arp

ARP Carrier Through Bolt kit for M96/M97 engines. Factory bolts are stretch bolts and must be replaced. These are stronger and reusable and help to prevent shuffling and fretting of the main bearing saddles. Required for engines that will see anything more than normal street driving.

Fits:
Porsche 996 Carerra

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610111562

106-23

204-5001

99610111562

99610111559

99610111560

The product you are viewing cross references to these numbers

Zoom in (2)

Crankshaft pulley. Porsche 986 Boxster / 987 Boxster / 987 Cayman / 996 / 997.1

Code: 99610211563

Crankshaft pulley.

porsche

Fit:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
Porsche 996 C2/C4/C4S 1998-04
Porsche 997 3.6L 2005-08

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610211563

99610211563

The product you are viewing cross references to these numbers

Zoom in (3) Zoom in (3) Zoom in (3)

Crankshaft sealing ring. Porsche Boxster 986 / Boxster 987 / 987C Cayman / 996 / 997

Code: 99911347540/1::1

Crankshaft sealing ring. 40 x 62 x 10.

elring

Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987C Cayman 2005-08
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 997 C2 / C4 / C2S / C4S 2005-08

Click 'zoom in' for large parts diagram.
Diagram ref no 4.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911347540

99911347540

172.630

The product you are viewing cross references to these numbers

Zoom in (3) Zoom in (3) Zoom in (3)

Crankshaft sealing ring. Porsche Boxster 986 / Boxster 987 / 987C Cayman / 996 / 997

Code: 99911347540

Crankshaft sealing ring.
40 x 62 x 10.

porsche

99911347540

172.630

The product you are viewing cross references to these numbers

Short block engine for Porsche 996 3.6L M96.03

Code: 996100996UX

Short engine comprising of crankcase, connecting rods, crankshaft, oil pump, timing chains. The engine block is sold on an exchange

Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £6446.00 will be held and then refunded when the old one is returned.

Fits:
M96.03
Porsche 996 3.6L Manual
Porsche 996 3.6L Tiptronic

PLEASE NOTE:
The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.

Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.

Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.

All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

996100996UX

996100996UX

996100996

The product you are viewing cross references to these numbers

Short block engine for Porsche 996 3.6L M96.03 car with X51

Code: 996100996XX

Short engine comprising of crankcase, connecting rods, crankshaft, oil pump, timing chains. The engine block is sold on an exchange

Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £6446.00 will be held and then refunded when the old one is returned.

Fits:
M96.03 cars with X51
Porsche 996 3.6L X51 Manual
Porsche 996 3.6L X51 Tiptronic

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

996100996XX

996100996XX

996100996

The product you are viewing cross references to these numbers