Rear Spoilers / Aerofoil

TechArt carbon fibre rear spoiler type I



Fits:
Porsche 992 turbo Cabriolet
Porsche 992 turbo S Cabriolet
Cabriolet only
NOT for cars with SportDesign Package

The TECHART Rear Spoiler I.
The aerodynamic add-on is mounted to the standard rear spoiler.

With the TECHART Rear Spoiler I, the automatic adjustment of the active spoiler remains unchanged.

Spoiler is made from carbon fibre

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

092121881009

The product you are viewing cross references to these numbers

911 GT3 Manthey Kit. For vehicles with a 20/21-inch Manthey lightweight wheel set.



Fits:
Porsche 992 GT3 - 2021 Onwards

911 GT3 Manthey Kit

The Manthey Kit offers comprehensive optimisation of the race track characteristics of the 911 GT3 (Type 992). In close cooperation with the engineers from Porsche and Manthey, the specifications of the vehicle have been specifically coordinated for use on the race track and at track days. For Porsche works driver Kévin Estre, this means a lap time of 6:55.737 minutes for the 20.8 kilometres of the Nürburgring Nordschleife. And for all other drivers: even better handling, even faster cornering speeds and even more adrenaline.

Improvements were achieved through the use of new aerodynamic and chassis components, modifications to the brake system and the optionally available Manthey lightweight wheel set. The 911 GT3 Manthey Kit is the result of decades of experience in GT sport, complex aerodynamic simulations and countless test kilometres on the Nürburgring Nordschleife. In addition, all components have been intensively matched and tested on the driving dynamics test bench and in the high-performance wind tunnel of the Porsche Development Centre in Weissach.

Aerodynamics package
In keeping with the principle of "form follows function", the aerodynamics of the vehicle have been modified and its design has been further honed: A new, larger lip is used at the front of the vehicle, The combination of its optimised geometry, the characteristic flaps and the additional air baffle elements on the underbody increases the downforce at the front axle by approx. 30%. The downforce on the rear axle is increased by around 45% by the new flow-optimised rear diffuser with longer fins in combination with the larger rear wing made of exposed carbon fibre. The rear wing features an angled blade as well as enlarged side plates painted with the Manthey logo. The aerodynamics package is completed by the carbon aerodiscs on the rear wheels. These reduce turbulence at the rear end and are available with a decorative film to match the colour of the vehicle’s exterior or wheel rims. Overall, the aerodynamics package significantly improves vehicle handling and thus contributes significantly to the performance of the 911 GT3.

Coilover suspension
Extensive testing was performed on the race track and driving dynamics test bench to develop a set-up for the coilover suspension (available with and without a front axle lift system) that leaves no wish unfulfilled in terms of performance, driveability or comfort. For example, the all-aluminium spring struts feature four-way adjustability of the damping force. The lightweight components allow ultra-precise adaptation to the respective track conditions and individual driver preferences. The damping force can be adjusted with easy accessibility and without tools in both the compression and rebound stages for low and high speed settings. The moderately adapted spring rates (+10% on the front axle, -7% on the rear axle) mean that the handling and balance of the 911 GT3 have been further optimised.

Brake line set with steel sleeve
The brake line set with steel sleeve ensures even more direct pedal feedback and a faster response time as a result. This component of the Kit was also tested and co-developed by Manthey on the Nürburgring Nordschleife.

The brake system of the 911 GT3 can optionally be fitted with racing brake pads. These pads were developed specifically for race track use and improve the fading characteristics as well as responsiveness and control. The brake pads are characterised by constant friction behaviour over a wide temperature range and very good wear behaviour with low disc wear.

Additional equipment
Two red towing loops are included in delivery for race track use. These are bolted onto the designated coils on the front and rear ends and must be removed again before driving on public roads.

As additional visual highlights, the 911 GT3 Manthey Kit includes new illuminated door entry guards in matte carbon with the Manthey logo in red and white. The LED door projectors in the side door exit lights project a white Manthey logo on both driver's and passenger's sides. The Manthey logo can also be applied to the vehicle doors in white or black.

Wheel set
The Manthey Kit is compatible with both the 20/21-inch 911 GT3 wheel set (standard gear wheel set) and the 20/21-inch 911 Manthey lightweight wheel set (available without tyres, valve and tyre pressure monitoring system sensor).

In order to further reduce the overall weight of the already lightweight-designed vehicle, the design of the standard wheel was technologically optimised with the 20/21-inch 911 Manthey lightweight wheel set. The result: A reduction in the springless and rotating masses by 16.1 lbs. (7.3 kg) per vehicle set, which significantly benefits the responsiveness of the spring/damper elements and further improves vehicle control.

The 20/21-inch 911 GT3 wheel set is available in the following paint finishes:

- Brilliant Silver

- Black (satin-gloss)

- Dark Silver

The 20/21-inch 911 Manthey lightweight wheel set is available in the following paint finishes:

- Brilliant Silver

- Black (satin-gloss)

- Dark Silver

- Neodyme

The wheel sets are suitable for the corresponding tyre sizes:

Front axle: 9.5J x 20 RO 46 with 255/35 ZR 20 (97Y) XL tyres

Rear axle: 12 J x 21 ET 45 with 315/30 ZR 21 (105Y) XL tyres.

Porsche recommends using Michelin Pilot Sport Cup 2 R tyres.

Note: Approval for road use and warranty are unaffected. The individual components of the 911 GT3 Manthey Kit are precisely matched. For this reason, they must only be installed together on the vehicle. Individual offers are shown separately. For further information, please contact your Porsche Centre.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992044855

The product you are viewing cross references to these numbers

Aero disc rear wheel. 
Available in Matt or Gloss carbon fibre



Fits:
Porsche 992 GT3 - 2019 Onwards
Only for OEM wheels

Premium Carbon fiber aero discs are aerodynamic wheel covers for the Porsche 992 GT3.

These improve the airflow around the rear of the car and make your rear wing work better. Some say you can reduce the wing angle by 2 degrees and fit these and still keep the same downforce numbers.

The covers help to manage the airflow around the rear wing, reducing vortices and drag, therefore offering an improvement to the aero efficiency and looks at the same time. A perfect marriage of form and function.

Weighing in at only 180 grams each, the wheel covers are made by hand from prepreg carbon of the highest quality. Using composite molds and baked to perfection. Our mounting structure is made out of carbon prepreg that is lightweight but gives the structures the rigidity they need and then some. They are hand sanded and polished to a mirror like shine. We then protect them with a UV resistant epoxy that is backed by our 5 year warranty against cracking and yellowing. No questions asked.

We supply all sets with titanium bolts and all mounting and wheel protection hardware.

Key Features:

• Hand made from the highest quality pre-preg carbon fiber
• Improved design and aesthetics
• Enhanced aerodynamic performance
• Titanium bolts included
• Included PPF Pre-Cuts and Nylon wheel shields  to protect wheels
• 30 minute install time per side (1 hour total)
• Easily reversible process

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT601025

The product you are viewing cross references to these numbers

Aerokit rear spoiler for cars with Sport Design Package



Fits:
Porsche 992 Carrera 2  Coupe - 2019 Onwards
Porsche 992 Carrera 4 Coupe - 2019 Onwards
Only for cars with Sport Design Package

Available with either chrome or primed (requires painting) slats.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204488

The product you are viewing cross references to these numbers

Ducktail Evo II Rear spoiler. 



Fits:
Porsche 992 Carrera - 
Porsche 992 Carrera S / Carrera 4S
Porsche 992 GTS
Porsche 992 GT3 Touring

Only for Coupe models

Introducing the 992 Ducktail Evo II by Moshammer – a masterpiece that channels the timeless spirit of an automotive legend. 
Inspired by the iconic Porsche 911 Carrera RS and its mighty ducktail.

Revolutionary Ram Air Ducts: 
The Moshammer 992 Ducktail Evo II boasts specially crafted Ram Air Ducts seamlessly integrated into its design. These ducts play a pivotal role in elevating your Porsche 992’s performance by ensuring a consistent and efficient supply of cold, fresh air directly to the intercoolers. The results are nothing short of remarkable.

Classic Fixed Spoiler Design: 
Just like the original Porsche ducktails, the Moshammer Ducktail Evo II features a fixed spoiler design. This classic style not only enhances your vehicle’s aerodynamics but also adds a touch of timeless elegance.

Effortless Installation: 
The Moshammer 992 Ducktail Evo II uses all original Porsche mounting points, eliminating the need for modifications for a hassle-free installation.

Elevate Your Porsche 992: 
This exceptional piece of automotive art not only captures the essence of a legendary era but also enhances the performance and style of your Porsche 992. It’s your ticket to standing out and making a statement every time you hit the road. Embrace the legacy, embrace Moshammer

This article is delivered unpainted.
Mounting material is included

With TÜV parts certificate (§19.3) Also approved in Switzerland

Installation
Install by using the original screw points and clips.
The original lift function is deactivated.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P992.40.3025

The product you are viewing cross references to these numbers

Ducktail Evo Pro
With TÜV parts certificate (§19.3)! Also recognized in Switzerland!



Fits:
Porsche 992 Carrera | S | 4S | GTS | GT3 TOURING | Coupe Only

The MOSHAMMER 992 Ducktail Evo Pro is not only a beautiful oem+ designed element that gives your Porsche a unique appearance, but our Ducktail ensures also the best possible aerodynamic properties, because it is an overall developed concept by engineers.

Efficiency and Performance.

The completely redesigned rear lid section with increased in size central double-inlets "Ram-Air-Ducts" also improve optimum flow supplies the two intercoolers with cold fresh air, like the function of the factory active rear spoiler does in the high extended performance position.

This constantly optimum airflow ensures that the engine can function in the ideal temperature window.
Another optimized detail is our redesigned rear of the ducktail, the centre outlet separate directly the hot engine bay air!

This ducktail evo pro is delivered unpainted.
Mounting material is included.
This is a replacement part, the oem unit needs to be removed for installation.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P992.40.3020

The product you are viewing cross references to these numbers

Ducktail with third brake light support. 



Fits:
Porsche 992 Carrera /Carrera S
Porsche 992 Carrera 4 / Carrera 4S
Porsche 992 GTS
Porsche 992 GT3 Touring

NOT for 992 Cabrio/Targa

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK434

The product you are viewing cross references to these numbers

Fabspeed Carbon Fibre wing end plates.



Finished in a textured satin black finish to match the OEM finish

Fits:
Porsche 992 GT3 20222>>

Carbon fibre replacements for the OEM wing end plates. Porsche doesn't offer these in carbon from the factory, Fabspeed rectified that by designing a perfect OEM replacement in gloss finish carbon fibre. These perfectly accent the other OEM carbon fibre parts on the car like the roof or mirrors.

FEATURES:

• Fits all Porsche 992 GT3 2022+ Models worldwide (Except touring models)
• Raises the wing 4.65 in / 118 mm and moves it rearwards by 5 in in / 127 mm
• Only adds 1 lbs / 0.45 KG's to the car
• CAD designed and thoroughly stress tested to withstand over 3 G's of cornering force and 1200 lbs of total downforce
• CNC machined from billet USA 6061 T6 aluminium
• Custom anodized black titanium hardware
• Increased downforce by moving the rear wing farther from the car body into a higher airstream just like a cup car
• OEM parts Laser scanned and CAD designed for perfect OEM fitment using an Ametek Handyscan 700
• Better visibility and safety because the rear spoiler is not blocking rear view
• Simple DIY (Do-It-Yourself) bolt-on installation, no cutting required
• All Fabspeed performance products are backed by theFabspeed Lifetime Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992GT3WEPLATES

The product you are viewing cross references to these numbers

Get a more aggressive look for your 992 GT3 with our Cup Car Style Wing Risers. Improve downforce, performance, and rearward visibility by raising the wing 4.65 in / 118 mm.



Finished in a textured satin black finish to match the OEM finish

Fits:
Porsche 992 GT3 2022>>


FEATURES:

• Fits all Porsche 992 GT3 2022+ Models worldwide (Except touring models)
• Raises the wing 4.65 in / 118 mm and moves it rearwards by 5 in in / 127 mm
• Only adds 1 lbs / 0.45 KG's to the car
• CAD designed and thoroughly stress tested to withstand over 3 G's of cornering force and 1200 lbs of total downforce
• CNC machined from billet USA 6061 T6 aluminum
• Custom anodized black titanium hardware
• Increased downforce by moving the rear wing farther from the car body into a higher airstream just like a cup car
• OEM parts Laser scanned and CAD designed for perfect OEM fitment using an Ametek Handyscan 700
• Better visibility and safety because the rear spoiler is not blocking rear view
• Simple DIY (Do-It-Yourself) bolt-on installation, no cutting required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR992GT3MWR

The product you are viewing cross references to these numbers

Fabspeed wing delete kit.



Fits:
Porsche 992 GT3 2022>> Models worldwide

Do you have a new 992 GT3 with the SWAN neck rear spoiler and would like to convert it to the wingless "Touring" style? With Fabspeed's Wing Delete Kit you can easily swap between having the wing on your car to a more subtle "touring" look just like the 992 GT3 Touring model. Fabspeed Motorsport USA is the world's very first company to CAD design, engineer and produce an excellent 3D printed conversion kit for this purpose. Modeled directly from the OEM wing using 3D scans for perfect OEM fitment. The system consists of Left and Right side wing stand replacement pieces for all 992 GT3 cars worldwide. These are necessary for removing the wing because the rear decklid bolts directly to the wing stands. Simply remove your OEM rear 992 GT3 wing stands and install our deletes, reusing the OEM Porsche mounting hardware.

FEATURES:

• Fits all Porsche 992 GT3 2022+ Models worldwide
• Easily swap between having a wing on your GT3 and removing it for a "Touring" look
• Lightweight replacements remove 12 lbs / 5.4 KGs from the car
• 3D laser scans of the OEM Porsche 992 GT3 wing stands using the Creaform Handyscan 700
• 3D scanning allows for perfect OEM fitment
• Made from highly durable UV resistant Nylon PA-12
• 3D Printed using HP industrial-grade printers
• Available with custom engraving or logo at additional charge (please inquire)
• Simple DIY (Do-It-Yourself) bolt-on installation, no cutting required
• See video instructions and explanation below:






Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Front bumper lower splitter kit. 

Fits:
Porsche 992 GT3

Front splitters are very effective at producing front end downforce without significantly increasing drag and this is achieved by creating a large pressure delta or difference between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon polyweave splitter blades. While running CFD we ensure we have an appropriate aero balance for the vehicle to ensure good on-track performance. 
The splitter installs with absolutely no cutting or permanent modification to your Porsche.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fibre and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material. The polyweave will abrade away and take quite a beating.
The splitter mounting was designed to handle the loads the splitter will see and can easily handle over 300 lbs. The mounting directly connects the splitter blade to the chassis, also known as chassis mounted.

Kit Includes

• Front Splitter Blade (LH and RH)
• Bracket Kit
• Chassis Mount x 2
• Leading Edge Mount
• Tube Kit
• Cross Beam and Outer Support Beam
  
• Hardware Kit

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install

Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Abrasive Resistant While Stiff
CNC Cut and Bent Brackets
CNC Cut Structural Tubing
Stainless Hardware Throughout

Manthey Performance Kit for Porsche 992 GT3. For vehicles with a front axle lift system (PR474) and a 20/21-inch GT3 wheel set.

Porsche Tequipment offers a Manthey Performance Kit for the current 911 GT3 for even better performance on circuits. The 911 GT3 with Manthey Performance Kit lapped the Nürburgring's Nordschleife in 6:55.737 minutes. This is exactly 4.19 seconds faster than the 911 GT3 without kit.

The modifications are focused on aerodynamics and chassis components. The new Performance Kit was developed in close collaboration between the Porsche engineers in Weissach and the Nordschleife specialists from Manthey in Meuspath. The Porsche Tequipment circuit-optimised components are sold through Porsche Centres.

Significant increase in downforce

The extensive changes to the aero package are what make the Manthey Performance Kit for the 911 GT3 recognisable. A larger spoiler lip and side flaps are fitted at the front of the car. In conjunction with the modified air guide elements on the underbody, they increase the downforce on the front axle. The modifications at the rear are even more pronounced. The swan-neck-supported wing of the 911 GT3 is wider, and now features a tear-off edge (Gurney). The end plates with their distinctive Manthey logos have also been enlarged, as has the wing’s angle of attack. The fins of the rear diffuser have been extended and are now made of CFRP. The aerodiscs on the rear wheels, which are also made of CFRP, further enhance the car’s aerodynamic efficiency.

In collaboration with Manthey, Porsche has developed special four-way coilover suspension for the 911 GT3 that can be adapted for use on the circuit. The suspension struts can be adjusted to four positions, and rebound and compression can be tweaked without tools. The moderate changes to the spring rates (10 percent higher on the front axle, seven percent lower on the rear) contribute to improved on-the-limit handling, without making any compromises necessary when it comes to day-to-day usability.

Adaptable coilover suspension

A lightweight forged wheel set with 20- and 21-inch rims is available as an option for the Porsche 911 GT3. They reduce unsprung mass by a total of 7.3 kilograms. They are available in Brilliant Silver, Dark Silver, Neodyme and (satin-gloss) Black. A set of brake lines with steel braids come as standard with the kit. They guarantee a very precise pressure point and thereby ensure optimal modulation of the brakes. Special racing brake pads are available as an option for the 911 GT3 with the Manthey Performance Kit. Door projectors and illuminated door sill guards with the Manthey logo help to personalise the car visually. A towing loop is also included in the kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204485502

The product you are viewing cross references to these numbers

Manthey Performance Kit for Porsche 992 GT3. For vehicles without a front axle lift system (-PR474) and a 20/21-inch GT3 wheel set.

Porsche Tequipment offers a Manthey Performance Kit for the current 911 GT3 for even better performance on circuits. The 911 GT3 with Manthey Performance Kit lapped the Nürburgring's Nordschleife in 6:55.737 minutes. This is exactly 4.19 seconds faster than the 911 GT3 without kit.

The modifications are focused on aerodynamics and chassis components. The new Performance Kit was developed in close collaboration between the Porsche engineers in Weissach and the Nordschleife specialists from Manthey in Meuspath. The Porsche Tequipment circuit-optimised components are sold through Porsche Centres.

Significant increase in downforce

The extensive changes to the aero package are what make the Manthey Performance Kit for the 911 GT3 recognisable. A larger spoiler lip and side flaps are fitted at the front of the car. In conjunction with the modified air guide elements on the underbody, they increase the downforce on the front axle. The modifications at the rear are even more pronounced. The swan-neck-supported wing of the 911 GT3 is wider, and now features a tear-off edge (Gurney). The end plates with their distinctive Manthey logos have also been enlarged, as has the wing’s angle of attack. The fins of the rear diffuser have been extended and are now made of CFRP. The aerodiscs on the rear wheels, which are also made of CFRP, further enhance the car’s aerodynamic efficiency.

In collaboration with Manthey, Porsche has developed special four-way coilover suspension for the 911 GT3 that can be adapted for use on the circuit. The suspension struts can be adjusted to four positions, and rebound and compression can be tweaked without tools. The moderate changes to the spring rates (10 percent higher on the front axle, seven percent lower on the rear) contribute to improved on-the-limit handling, without making any compromises necessary when it comes to day-to-day usability.

Adaptable coilover suspension

A lightweight forged wheel set with 20- and 21-inch rims is available as an option for the Porsche 911 GT3. They reduce unsprung mass by a total of 7.3 kilograms. They are available in Brilliant Silver, Dark Silver, Neodyme and (satin-gloss) Black. A set of brake lines with steel braids come as standard with the kit. They guarantee a very precise pressure point and thereby ensure optimal modulation of the brakes. Special racing brake pads are available as an option for the 911 GT3 with the Manthey Performance Kit. Door projectors and illuminated door sill guards with the Manthey logo help to personalise the car visually. A towing loop is also included in the kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204485503

The product you are viewing cross references to these numbers

Rear spoiler lip ABS plastic

Fits:
Porsche 991 Carrera 2S / Carrera 4S - 2019 Onwards

This ABS plastic rear spoiler is a great way to give your 991 an OEM+ look with a modern spin on the classic Porsche design. 
This spoiler is made from ABS (allowing it to be painted) using state-of-the-art manufacturing techniques for a factory fit and finish.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827952D

The product you are viewing cross references to these numbers

Rear spoiler lip carbon fibre. 

Fits:
Porsche 991 Carrera 2S / Carrera 4S - 2019 Onwards

This Carbon Fibre rear spoiler is a great way to give your 991 an OEM+ look with a modern spin on the classic Porsche design. 
This spoiler is made from carbon fiber using state-of-the-art manufacturing techniques for a factory fit and finish.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827952D

The product you are viewing cross references to these numbers

Rear spoiler Sport Classic. 



Fits:
Porsche 992 - 2019 Onwards


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827940NG2X

The product you are viewing cross references to these numbers

Rear spoiler. 



Fits:
Porsche 992 Dakar

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992827940PG2X

The product you are viewing cross references to these numbers

Rear spoiler.



Fits:
Porsche 992 turbo / turbo S

Not for models with original Aerokit.

Experience the Perfect Fusion of Form and Function.
Introducing the cutting-edge Moshammer Performance Rear Wing, a game-changer exclusively engineered by Moshammer for the 992 turbo and turbo S.

The existing aerodynamic configurations of the Porsche Active Aerodynamics (PAA) remain unimpaired.
The impeccable performance system is further enhanced by the Moshammer Performance Rear Wing.

Positive properties compared to a fixed rear wing:

• Low drag
• High downforce
• Unchanged top speed
• Increased airbrake function
• More driving stability

To preserve the harmonious lines of the Porsche, it is best to match the Moshammer Performance Rear Wing with your Porsche 992 Turbo’s exterior colour.
Available in Gloss Carbon Fibre or Unpainted finish

Mounting material is included.

With TÜV parts certificate §19.3 (in prep).

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P992.20.302

The product you are viewing cross references to these numbers

Rear wing end plates carbon fibre. 
Sold as a pair



Fits:
Porsche 992 GT3 - 2019 onwards

Premium Carbon fiber wing endplates for the Porsche 992 GT3.

We reimagined the design of the rear end of the 992 GT3 and the OEM plastic wing endplates are an easy first upgrade for your GT3. Over 30% larger for improved aero efficiency yet 50% lighter than the OEM units, the lift-to-drag ratio is improved with the larger surface area of the endplates under the leading edge of the rear wing. 

The larger endplates help to manage the airflow around the rear wing, reducing vortices and drag, therefore offering an improvement to the aero efficiency and looks at the same time. Our design builds on the OEM units by correcting two important lines, the first is the rear ducktail wing and the other one spills into the rear arches and window. A perfect marriage of form and function.

Weighing in at only 150 grams each. The endplates are made by hand from prepreg carbon of the highest quality. Using aluminium molds and baked to perfection. Our inner skeleton structure is made out of CFRP that is light weight but gives the hollow structures the rigidity they need and then some. They are hand sanded and polished to a mirror like shine. We then protect them with a UV resistant epoxy that is backed by our 5 year warranty against cracking and yellowing. No questions asked.

We supply all sets with the same adhesive Porsche uses from the factory (3M VHB)
We also include a small bottle of primer liquid from 3M, that will further improve the bond of your Porsches new wings. A full user manual is included in the hand crafted box they come in, with all the steps described in great detail with illustrations. The OEM endplates are easily removed with zero use of force, and once the new Ångström endplates are mounted the procedure can be easily reversed if you ever decide to do so. 

Key Features:

• Hand made from the highest quality pre-preg carbon fiber
• Laminated with a skeleton manufactured from high-grade, heat and chemically resistant CFRP
• Improved design and aesthetics
• Larger surface area reducing vortices
• Enhanced aerodynamic performance
• Use OEM adhesion method (3M VHB™)
  
• 30 minute install time per side (1 hour total)
• Easily reversible process

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT827867

The product you are viewing cross references to these numbers

Rear spoiler / rear wing / rear lip / spoiler lip for Porsche 911/992

• Suitable for Porsche 911/992 2019>>

• Porsche 992 Carrera 2 3.0L
• Porsche 992 Carrera 4 3.0L
• Porsche 992 Carrera 2 Cabriolet 3.0L
• Porsche 992 Carrera 4 Cabriolet 3.0L
• Porsche 992 Carrera 2S 3.0L
• Porsche 992 Carrera 4S 3.0L
• Porsche 992 Carrera 2S Cabriolet 3.0L
• Porsche 992 Carrera 4S Cabriolet 3.0L
• Porsche 992 Targa 4 3.0L
• Porsche 992 Targa 4S 3.0L

• Vehicle-specific TÜV parts certificate
• Good fit, as no universal part but specially developed for this type of vehicle!
• Clean and simple TÜV-tested attachment using 3M ™ Acrylic Plus adhesive tape PT 1100 with extremely high instant adhesion and high adhesive strength

• The assembly with the 3M ™ adhesive tape PT 1100 takes place in three simple steps:
- Clean the surface with the enclosed 3M cleaning cloth
- Remove the protective strip from the pre-assembled and pre-assembled adhesive tape
- Glue on, done!

• 3M ™ Acrylic Plus adhesive tape PT 1100 is a 4-ply black double-sided acrylic adhesive tape with very high instant adhesive strength that was specially developed for the automotive sector and is ideally suited for attaching rigid attachments where an aesthetic visible edge is desired. PT1100 has very good adhesion to a large number of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. Due to the unique viscoelastic properties of the PT1100, tensions in the adhesive seam are superbly reduced, so that extremely durable connections are created.
• High durability even in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistance
• Easy dismantling without damage to the paint
• The rear lip is made of high-quality ABS material and has a structured (grooved) surface, making the spoiler lip very unsusceptible to scratches
• Due to the structured surface, no painting is necessary! (Product is unpainted)
• Including assembly instructions
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Rear wing increased angle of attack bracket kit. Porsche 992 GT3



Fits:
Porsche 992 GT3

The Verus Engineering Increased AOA (Angle Of Attack) Mount Kit replaces the factory mounts and allows for a wider range of angles with the OEM wing spoiler blade. This means more rear downforce from the factory wing, while retaining OEM adjustment, OEM looks, and OEM feel. The units bolt directly into the carbon wing exactly like the OEM units and are produced in house on our 5-axis CNC mills out of 6061-T6 aluminum.

Utilizing state-of-the-art analysis software during the R&D process, we were able to ensure that the OEM wing improved performance by increasing the AOA (Angle of Attack). Using in house scan data during the design process, we were able to design the wing mounts with aesthetics that follow the factory Porsche design language and bolts on like an OEM piece.

These units are great for owners that believe the car to need a slight bump in rear downforce to settle the car at speed, or as part of our Ventus 1 package that offers a slight bump in overall vehicle downforce, front and rear. Add performance, improved aesthetics, and function to your 992 GT3 with these simple to bolt on units.

Kit Includes

• Left Mount
• Right Mount

Features
Increase Downforce Generated by OEM Wing
Improved Overall Aerodynamic Efficiency
Better High-Speed Stability
Reduce Lap Times
Simple Bolt-On Installation

Specifications
CFD Designed and Tested
6061-T6 Machined Construction
CNC Cut in House in the USA
Porsche Design Language and Factory Fit and Feel

Rennline swan neck rear wing delete kit. 



Fits:
Porsche 992 GT3 2022 Onwards

Do you love your 992 GT3 but wish you could easily swap between the factory swan neck and something a little more subtle? 

Product Description

Easily convert your GT3 into a GT3 touring with our rear wing delete kit. 

Our kit allows you to swap between the factory Swan Neck and the GT3 wing delete in a matter of minutes, utilising the factory hardware and premium materials.

This kit comes with everything you need for a simple and clean installation.

• Fits all 992 GT3 2022 Onwards
• No Modifications Necessary
• 3D Scanned, Designed In Cad
• Easily reversible
• Save weight - Over 11lbs
• Hand Laid Carbon Fibre

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E335

The product you are viewing cross references to these numbers

Sport Design Rear spoiler with Carbon Fibre top wing 992 Turbo-Look



Fits:
Porsche 992 Carrera C2 / C2S / C4 / C4S Coupe

We recommend using skilled bodyshop for painting and fitting. Some modifications maybe necessary.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204485X

The product you are viewing cross references to these numbers

Swan neck rear spoiler end plates carbon fibre. 
Sold as a pair



Fits:
Porsche 992 GT3
Available in Gloss or Matt finish

Premium Carbon fiber wing endplate covers for the Porsche 992 GT3

Weighing in at only 140 grams each these end plates are made by hand from prepreg carbon of the highest quality, using high temperature molds and baked to perfection. Our inner clip structure is made out of CFRP and is an exact replica of the original units.  We then protect them with a UV resistant epoxy that is backed by our 5 year warranty against cracking and yellowing. No questions asked. 

Installed in 1 minute per side and completely reversible. A full user manual is included in the hand crafted box they come in, with all the steps described in great detail with illustrations. The OEM endplates are easily removed with zero use of force, and once the new endplates are mounted the procedure can be easily reversed if you ever decide to do so. 

Key Features:

• Hand made from the highest quality pre-preg carbon fiber
• Exact fit and finish of OEM units
• UV protected
• One minute install per side
• Hand sanded and polished to a mirror like shine.
• Easily reversible process

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT827685

The product you are viewing cross references to these numbers

TechArt carbon fibre rear spoiler type I



Fits:
Porsche 992 turbo Coupe
Porsche 992 turbo S Coupe
Coupe only
NOT for cars with SportDesign Package

The TECHART Rear Spoiler I.
The aerodynamic add-on is mounted to the standard rear spoiler.

With the TECHART Rear Spoiler I, the automatic adjustment of the active spoiler remains unchanged.

Spoiler is made from carbon fibre

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

092121880009

The product you are viewing cross references to these numbers

TechArt rear spoiler type I
Fits Coupe, Cabriolet and Targa



Fits:
Porsche 992 Carrera / Carrera S / GTS
Porsche 992 Carrera 4 / Carrera 4S / 4 GTS
Porsche 992 Targa 4 / Targa 4S / Targa 4 GTS

The TECHART Rear Spoiler I.
The aerodynamic add-on is mounted to the standard rear spoiler.

With the TECHART Rear Spoiler I, the automatic adjustment of the active spoiler remains unchanged.

Spoiler is made from PU-RIM material

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

092100800009

The product you are viewing cross references to these numbers

Rear wing kit carbon fibre. Porsche 992 GT3

Fits:
Porsche 992 GT3

The UCW Rear Wing is a great addition to your Porsche 992 GT3 to increase downforce significantly in the rear, increase confidence on track, and reduce lap times. The UCW wing bolts on exactly like the factory wing, for an easy, sub 20 minute install.

Utilizing state-of-the-art analysis software during the R&D process, we optimized the airfoil for performance for the given build volume which is derived from the V1X.  Further utilizing CFD, we ensured the rear wing sees adequate airflow while installed on the car and performs well at various angles of attack.

During the design process; we utilized in-house scan data.  This results in a product that features a near OEM fit and finish.

The UCW Rear Wing is the perfect addition to the track goer or street car enthusiast who requires a large bump in rear downforce to balance out a significant front aero package.

Kit Includes

• Rear Wing Element Assembly x 1
• Rear Wing Carbon Endplate x 2
• Hardware Kit, Includes All Parts Necessary for a Seamless Install

Features
Optimized Airfoil Using ANSYS Adjoint Solver
Improved Efficiency (L/D)
Increased Downforce
Bolts to OEM Uprights
Capable of Generating and Withstanding 500+lbs of Downforce
Capable of Balancing Out Significant Front Aerodynamic Systems

Specifications
Carbon Fiber Rear Wing - 2x2 Twill Pre-preg carbon, Autoclave Cured, Automotive High-Gloss Clear
Machined Billet Aluminum Wing Mounts
Fully Carbon Fiber Endplates, 3D Shaped
Stainless Hardware Throughout

Wing plate for rear spoiler. Black



Fits:
Porsche 992 GT3 2021>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9GT82759

The product you are viewing cross references to these numbers

Wire harness for 3rd brake light. Aerokit package



Fits:
Porsche 992.1 Carrera 2019>> with Aerokit rear spoiler

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992971170A

The product you are viewing cross references to these numbers

Wiring harness loom third brake light. 



Fits:
Porsche 992 Dakar

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992971170D

The product you are viewing cross references to these numbers