These discs are not handed. They fit left or right side of the vehicle. New Brembo PVT symmetric design. For more information CLICK HERE
Porsche 996 Turbo 2001-05 FRONT
Porsche 996 C4S 2001-05 FRONT
Porsche 997 C4S FRONT
Porsche 997 C2S FRONT
Porsche 997 MKII C4S FRONT
Porsche 997 MKII C2S FRONT
Porsche 718C Cayman S / GTS 2.5L FRONT
Porsche 718 Boxster S / GTS 2.5L FRONT
Porsche 991.2 Carrera FRONT
PLEASE NOTE: Price shown is for EACH.
Brake Disc Thickness: 34 [mm]
Diameter: 330 [mm]
Fitting Position: FRONT
Number of holes: 5
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
9963514XX04BRE
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
库存 
• brake, clutch and gear components
• starter motors and alternators
• carburetors, fuel pumps and engine components
• glass and metal surfaces before gluing
The advantages of Textar brake cleaner:
• does not destroy polystyrene
• does not contain any chlorinated solvents
• is listed with the German Federal Ministry for the EnvironmentHow to use:
Spray a thick coating on the parts to be cleaned. Allow the solvent to drip and/or evaporate. Repeat if necessary.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
96000100
您正在查看的产品与这些编号存在交叉引用关系
库存
For brake systems and is highly temperature-resistant (up to 1,000°C).
Available in 75ml tube and 5ml sachet
The advantages of Cera Tec:
• Non-conductive and contains no solids
• Suitable for ABS
• Facilitates brake installation
• Reduces brake squealing
• Protects against scoring and corrosion
• Free of copper and acids
• Pressure-resistant / high viscosity
Cera Tec is also suitable for lubricating:• Disc- and drum-brake systems
• Compressors
• Centralised lubrication systems
• Axle bearings
• Chains
• Seat rails
• Sunroof tracks
• Battery terminals
Application:
Apply a thin layer of Cera Tec on the marked sections
