Brake Rotor Centering Ring. Porsche 944 / 968 - 9products
This part is used for install the larger 304 x 32mm M030 brake rotors to a 944 1987-91 or 968 1992-95.
Fits
Porsche 944 1987-91
Porsche 968 1992-95
Material:
Aluminium 6082-T6
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9P-44RC-98
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Two-piece floating slotted V3 rear iron disc upgrade
(including road centre-lock wheels).
These assemblies will replace the steel version with 380mm front and rear disc. From our information, the Porsche 981GT4 and 991GT3 with PCCB are 410mm front /390mm rear. PFC are working on replacement disc for PCCB cars.
Disc size : 380 mm x 30mm
Porsche 991 GT3 2012>>
Porsche 992 GT3
Porsche Cayman 981C GT4 2013>>
Porsche Cayman 718 GT4
Not suitable as PCCB conversion 991G
Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?
PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.
The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.
This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.
● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 992 GT3 4.0L
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
Vented, Perforated, Two-piece brake disc, Coated
Outer diameter: 350 mm
Brake Disc Thickness: 34 mm
Porsche 991.2 2S 4S C2S C4S FRONT
Porsche 992.1 2S 4S C2S C4S FRONT
The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load.
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.
Your advantages:
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9P161530
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4S 3.0L
Vented, Perforated, Two-piece brake disc, Coated
Outer diameter: 380 mm
Brake Disc Thickness:30 mm
Not for cars with ceramic brake (PCCB)
Porsche 982SP (718) Boxster Spyder 2019>> - REAR
Porsche 982 (718) Cayman GT4 2019>> - REAR
Porsche 992.1 Carrera GTS - REAR
Porsche 992.1 Carrera 4 GTS - REAR
Porsche 992.1 turbo - REAR
The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load.
The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimised chassis structures.
Your advantages:
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• „Hot spots" prevented by optimised design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
98135240
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L