扭力杆
按车型类型筛选
Plated & plugged hollow torsion bars 26mm. Porsche 911/912/930/356
代码: 1-PP911R26
Plated & Plugged Hollow Torsion Bars.
Plated/Plugged 26mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1-PP911R26
您正在查看的产品与这些编号存在交叉引用关系
Plated/Plugged 26mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1-PP911R26
1-PP911R26
90133310105
90133310115
90111110106
90133310205
90133310210
90133310206
91133310109
91133310116
91133310209
91133310216
91133310103
91133310113
91133310203
91133310213
91133310111
91133310114
91133310211
91133310214
91133310112
91133310115
91133310212
91133310215
311511115D
311511116D
94433311500
94433311600
94433310300
94433310400
95133310330
95133310430
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€646.70
当前 €633.77
库存 
Plated & plugged hollow torsion bars Rear. Porsche 911/912/930 86-89
代码: 1-PP911RT29
Plated & Plugged Hollow Torsion Bars - REAR
Plated/Plugged 29mm, PAIR
Fits:
For G50 Transmission
Porsche 911/912/930 1987-89
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1-PP911RT29
您正在查看的产品与这些编号存在交叉引用关系
Plated/Plugged 29mm, PAIR
Fits:
For G50 Transmission
Porsche 911/912/930 1987-89
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1-PP911RT29
1-PP911RT29
PP911RT29
91133311500
91133311502
91133311600
91133311602
93033311501
93033311502
93033311601
93033311602
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€652.54
当前 €639.49
由供应商供货
Plated & plugged hollow torsion bars Rear. Porsche 911/912/930/356
代码: 1-PP911R27
Plated & Plugged Hollow Torsion Bars. - REAR
Plated/Plugged 27mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1-PP911R27
您正在查看的产品与这些编号存在交叉引用关系
Plated/Plugged 27mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
1-PP911R27
PP911R27
1-PP911R27
90133310105
90133310115
90111110106
90133310205
90133310210
90133310206
91133310109
91133310116
91133310209
91133310216
91133310103
91133310113
91133310203
91133310213
91133310111
91133310114
91133310211
91133310214
91133310112
91133310115
91133310212
91133310215
311511115D
311511116D
94433311500
94433311600
94433310300
94433310400
95133310330
95133310430
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
€646.70
当前 €633.77
库存
QuickChange™ Torsion Bars, REAR. Porsche 911 65-86 / 914 / 356 / 944 / 968 / 924
代码: 21020
QuickChange™ Torsion Bars, REAR
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930/914 '65-'86
Porsche 356 A/B '48-'65 (Pre-A, C and CS Read Notes),
Porsche 944/968/924 '76-'95 w/ QuickChange Spring Plates
PLEASE NOTE: sizes 34mm and 36mm are not applicable for 944, 968 and 924 models)
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
21020
您正在查看的产品与这些编号存在交叉引用关系
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930/914 '65-'86
Porsche 356 A/B '48-'65 (Pre-A, C and CS Read Notes),
Porsche 944/968/924 '76-'95 w/ QuickChange Spring Plates
PLEASE NOTE: sizes 34mm and 36mm are not applicable for 944, 968 and 924 models)
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
21020
2102026
2102027
2102028
2102029
2102030
2102031
2102032
2102033
2102034
2102036
2102038
90133310105
90133310115
90111110106
90133310205
90133310210
90133310206
91133310109
91133310116
91133310209
91133310216
91133310103
91133310113
91133310203
91133310213
91133310111
91133310114
91133310211
91133310214
91133310112
91133310115
91133310212
91133310215
311511115D
311511116D
94433311500
94433311600
94433310300
94433310400
95133310330
95133310430
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
价格低至: €550.45
显示从1到4（共4个产品）
关于扭力杆
使用性能升级扭力杆升级您的保时捷悬架：技术规格和优势
性能升级扭力杆的技术规格：
- 性能升级扭力杆是保时捷悬架系统的重要组成部分。
- 它们是扭力杆悬架系统的一部分，负责支撑车辆的重量并提供稳定性。
- 性能扭力杆通常由热处理合金钢等优质材料制成，具有更高的强度和耐用性。
- 性能升级扭力杆可作为保时捷车型的售后升级或标准替代品。
升级或更换保时捷性能升级扭力杆的好处：
增强的悬架性能：性能升级的扭力杆提供了更高的刚度和更好的操控特性，从而实现了更精确的控制和更好的抓地力。
可调节性：一些性能扭力杆具有多个调节位置，可让您根据驾驶偏好或特定轨道条件微调悬架设置。
改善重量分布：升级到性能扭力杆可以帮助优化前后轴的重量分布，从而提高转弯时的平衡性和稳定性。
提高耐用性：与标准扭力杆相比，性能扭力杆旨在承受更高的负载并提供更高的耐用性，即使在苛刻的驾驶条件下也能确保持久的性能。
提高行驶高度的潜力：根据具体的扭力杆升级，您可以选择调整保时捷的行驶高度，以实现更具侵略性的姿态和更好的空气动力学性能。
在 Design911，我们专门为您的保时捷提供正确的零件和专业建议。我们提供专为保时捷车型设计的各种性能升级扭力杆，包括售后升级和 OEM 更换。我们知识渊博的团队可以根据您的保时捷车型、年份和特定的悬架要求帮助您选择合适的扭力杆。我们了解实现最佳悬架性能和操控特性的重要性，我们可以指导您选择最适合您需求的扭力杆。凭借我们的专业知识和对客户满意度的承诺，我们可以帮助您提高保时捷的悬架精度、稳定性和整体驾驶体验。立即联系我们，享受我们的全面支持并获得根据您的要求量身定制的高质量零件。
您可能也喜欢
流行车型
