Front Sub frame

Front axle cross member.



Fits:
Porsche 911 2.7RS / 2.8 RSR / 2.5ST / 3.0 934

Temperature hardened axle cross member complete with brackets

Cast in magnesium  but the 2 holes for rear arms are to be made at installation

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91134103101

您正在查看的产品与这些编号存在交叉引用关系

GT3 Front Suspension System. The Ultimate Front Suspension System



Our GT3 front suspension delivers superior grip and ride quality.

We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.

Ease of adjustment
Easily adjust camber, caster and even track width.

Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.

Low friction, spherical action

Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.

Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.

Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.

Weathersealed

Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.

Improved Geometry and subframe

Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.

Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.

Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.

Fit and finish

Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.

The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.

You can buy spare control arms if they need replacing. Part number 2180016-SA

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180010

您正在查看的产品与这些编号存在交叉引用关系

Wishbone front A-frames fitted with HD Bushes (Set of 2 Left & Right )  

Two A-frame wishbones fitted with Heavy Duty bushing. 85 Shore rating 

Fits:
Porsche 911 1974-89
Porsche 930 Turbo

Click "Zoom in" to see the diagram.
Diagram Ref No 14.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3602409111

您正在查看的产品与这些编号存在交叉引用关系