热交换器

Exhaust tubes to connect racing heat exchangers (No. 91133091019S / 91133091020S) to standard exhaust with 2 inlets. Stainless steel.



Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91122091021S

您正在查看的产品与这些编号存在交叉引用关系

Exhaust conversion set.



Fits:
Porsche 911 2.7-3.0L 08/1973-07/1983

Exhaust conversion set, free-flow, with 60 mm tail pipe. You will need to convert the oil pipe system due to change of heat exchangers's shape. All oil pipes necessary are provided with this kit.

Material: Stainless Steel
Number of Inlets / Outlets: 2/1
Outer Diameter: 60 mm
Surface: Blank

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1620000810

您正在查看的产品与这些编号存在交叉引用关系

这些钛部件具有防锈和耐腐蚀的特性，而这可能是传统钢螺柱和螺母的常见问题。这种耐腐蚀性可确保螺柱和螺母保持完整性，从而在必要时轻松拆卸和安装。对于需要轻松使用车辆排气系统的保时捷爱好者来说，它们是完美的升级。

#罗勒#

• 超高性能产品
• 采用钛Ti6Al4V技术

包含12 个螺柱、螺母和垫圈

适合：
保时捷 911 1965-77
保时捷 964（无涡轮增压）
保时捷 993 全部
保时捷 996（无涡轮增压）
保时捷 997（无涡轮增压）
保时捷 986 全部
保时捷 987 全部
保时捷 718 4 缸涡轮增压

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TITANSTUDS12

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Heat Exchanger LEFT side for cars with mechanical injection.
MILD STEEL



Fits:
Porsche 911 2.3L / 2.7L 1971-75

For the RIGHT hand side use part No.
91133091012 = Mild Steel

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091013

您正在查看的产品与这些编号存在交叉引用关系

Exhaust heat exchanger LEFT side for cars with mechanical injection.
POLISHED STAINLESS STEEL



Fits:
Porsche 911 2.3L / 2.7L 1971-75

For the RIGHT hand side use part No.
91133091012S = Stainless Steel

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091013S

您正在查看的产品与这些编号存在交叉引用关系

Exhaust heat exchanger, Stainless steel, fits left or right side.
Ø41 mm outside tubing



Fits:
Porsche 911 SC/911 Carrera 2.7L-3.0L 08/1975-07/1983

Price is for each one

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091101S41

您正在查看的产品与这些编号存在交叉引用关系

Exhaust heat exchanger.


Fits:
Porsche 911 1965-69
Porsche 911 T-V / 911 T-K 1970-73
Porsche 911 / 911S / Carrera2.7 >>1974

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91121102

您正在查看的产品与这些编号存在交叉引用关系

Exhaust heat exchangers, fits left or right side.
GALVANISED STEEL



Fits:
Porsche 911 2.7L / 3.0L 1974-83

Price is for each one

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091101G

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Heat Exchangers fits left or right side.
MILD STEEL, PAINTED



Fits:
Porsche 911 2.7L / 3.0L 1974-83

Price is for each one

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091101

您正在查看的产品与这些编号存在交叉引用关系

Exhaust heat exchangers,
MILD STEEL



Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76
For Carburettor engine cars.

Select below. Price is for each one

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9113309101

您正在查看的产品与这些编号存在交叉引用关系

Exhaust heat exchangers fits left or right side.
POLISHED STAINLESS STEEL



Fits:
Porsche 911 2.7L / 3.0L 1974-83

Price is for each one

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091101S

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Heat Exchangers.
POLISHED STAINLESS STEEL



Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76
For Carburettor engine cars.

Price is for each one.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9113309101

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Race Tubes. Painted steel.

Exhaust tubes to connect exhaust box (No. 91122092212) to racing heat exchangers (No. 91133091019S / 91133091020S)



Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133092213

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Racing Heat Exchanger without heating function, Ø45 mm outside. Fits 91122092212 directly with use of exhaust tube 91133092213. Parts no 91122091021 needed for use with standard exhaust. Stainless steel.



Fits:
Porsche 911 T/E/S (not mech. injection) 2.0-2.4L 01/1963-07/1973
Porsche 911 S 2.4L 08/1971-07/1973
Porsche 911 S (mech. injection) 2.4L 08/1971-07/1973
Porsche 911 S (mech. injection) 2.7L 08/1973-07/1975
Porsche 911/911 S/911 Carrera 2.7L 08/1973-07/1975

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

16231019

您正在查看的产品与这些编号存在交叉引用关系

Exhaust racing tube without heating function. Ø 38 mm outside.
Replacing heat exchangers. Painted chrome steel.



Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76

Left or right side
Select below. Price is for each one

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9112209101

您正在查看的产品与这些编号存在交叉引用关系

Heat control box connecting piece for SSI heat exchangers.



Fits:
Porsche 911 2.7L-3.3 08/1973-07/1986

Click 'Zoom in' for large parts diagram.
Diagram ref 20.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91165911901

您正在查看的产品与这些编号存在交叉引用关系

Stainless steel heat exchanger elbow connector.



Fits:
Porsche 911Carrera 3.0 1976-77
Porsche 911 SC 1978-83
Porsche 911 (930) Turbo 3.0L 1975-77
Porsche 911 (930) Turbo 3.3L 1978-89

Click 'zoom in' for large parts diagram.
Diagram ref no 19.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91121113100

您正在查看的产品与这些编号存在交叉引用关系

Heat exchanger elbow connector



Fits:
Porsche 911/911S/Carrera 3.0 1975-77
Porsche 911 SC 1978-83
Porsche 911 (930) Turbo 3.0L 1975-77
Porsche 911 (930) Turbo 3.3L 1978-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 19.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91121113100

您正在查看的产品与这些编号存在交叉引用关系

M10 Nut for Exchanger to Muffler Bolt.



Fits:
Porsche 911 1969-77
Porsche 914-6 1970-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99908400202

您正在查看的产品与这些编号存在交叉引用关系

Hexagon headed heat exchanger bolt to muffler.



Fits:
Porsche 911 1969-77
Porsche 914-6 1970-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9000751480Y

您正在查看的产品与这些编号存在交叉引用关系

Hexagon headed heat exchanger bolt to muffler.



Fits:
Porsche 911 1969-77
Porsche 914-6 1970-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9000751480Y

您正在查看的产品与这些编号存在交叉引用关系

Heat exchanger mounting kit.



Fits:
Porsche 911 1974-86

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG91121100

您正在查看的产品与这些编号存在交叉引用关系

排气安装套件。



适合：
保时捷 911 2.7L / 3.0L / 3.2L 08/73-07/85

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG91121100

您正在查看的产品与这些编号存在交叉引用关系

Heat exchanger set, stainless steel, Ø41 mm outer tubes, left / right.

Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

IMPORTANT: Major modification needed on engine tin ware when installing on 3.2ltr engines.

Price is for a SET OF 2

Fits:
Porsche 911 (Conversion) 3.2ltr 08/1983 - 07/1989

Core Length: 470 mm
Core Width: 760 mm
Core Depth: 380 mm
Outer diameter: 41 mm

LONG LIFE

Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the by products of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1623106810

您正在查看的产品与这些编号存在交叉引用关系

Heat exchanger set, stainless steel, Ø41 mm outer tubes, left / right.

Are you carrying out an engine swap to fit a 964 / 993 3.6ltr to an early 911?
Use these SSi heat exchangers to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

IMPORTANT: Major modification needed on engine tin ware when installing on 3,6ltr engines.

Price is for a SET OF 2

Fits:
Porsche 911 (Conversion) 3.6ltr 01/1963 - 07/1989

Core Length: 470 mm
Core Width: 750 mm
Core Depth: 370 mm
Outer diameter: 41 mm


LONG LIFE

Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1623107110

您正在查看的产品与这些编号存在交叉引用关系

Heat exchanger sets, Stainless Steel.

Improve exhaust gas flow using these "big bore" SSi heat exchangers.
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.

Fits:
Porsche 911 (carb.) Europe 2.0ltr 01/63-07/73
Porsche 911 (carb.) USA 2.0ltr -2.4ltr 08/65-07/71
Porsche 911 (inj.) Europe 2.0ltr - 2.4ltr 08/68-07/71
Porsche 911 (inj.) USA 2.0ltr -2.4ltr 08/68-07/71
Porsche 911 Europe 2.7ltr 08/73-07/75
Porsche 911 Europe 3.0ltr 08/77-07/83
Porsche 911 USA Federal 2.7ltr 08/74-07/75
Porsche 911 USA Federal 3.0ltr 08/77-07/78

Price is for a SET OF 2

LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091911SSI41

您正在查看的产品与这些编号存在交叉引用关系

热交换器套件 不锈钢PORSCHE 911 配备 964 或 993 3.6L 发动机
价格为 2 件套的价格

您是否正在更换发动机以将 964/993 3.6ltr 适配到早期的 911 上？
使用这些 SSi 热交换器通过删除侧面和中央消音器并将后消音器变成早期预碰撞碰碰车上的“二进一出”系统来解决排气要求。

适合：
保时捷 911 1964-89
配备 964 或 993 3.6L 发动机的保时捷 911

长寿

采用 AISI 321/EN4531 钛稳定不锈钢制成，在最恶劣的道路条件（盐分）下的预期寿命为 20-30 年。

更高的功率输出
尤其是在中低转速范围内，输出会增加。该设计通过最大限度地减少气门重叠时的进气扰动并提高废气抽取效果来产生动力。体积效率增加，从而功率输出增加。 SSI 集管是保时捷在所有自然吸气六缸竞赛发动机上使用的基本集管设计的显着改进版本。

一氧化碳安全
与所有其他售后市场热交换器不同，SSI 热交换器集管的设计旨在最大限度地减少发动机产生的酸对封闭主管进行内部腐蚀的可能性，从而使一氧化碳进入乘客室。 AISI 304 不锈钢管对燃烧副产品具有很强的抵抗力。 SSI 仅使用一件式主管，消除了手工焊缝开裂以及由此导致的一氧化碳泄漏的可能性。




相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091936SSI

您正在查看的产品与这些编号存在交叉引用关系

Heat exchanger sets, Stainless Steel for Porsche 911 1972-74 Mechanical Injection Engines SSI
Price is for a SET OF 2



Fits:
911 (inj.) Europe 2.4L 08/71-07/73
911 (inj.) USA 2.2L-2.4L 08/71-07/73
911 Carrera Europe 2.7L 08/73-07/75

LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091913SSI

您正在查看的产品与这些编号存在交叉引用关系

Heat Exchanger Sets Stainless Steel Porsche 911 K-Jet Engine SSI



Replace the rusty, steel heat exchangers with these high quality stainless steel SSi units.
Made using AISI 321/EN4531 titanium stabilized stainless steel, these heat exchangers offer long life, increased power output and a quality fit.  

Price is for a SET OF 2

Fits:
K-jet (none mechanical injection engines)
911 (carb.) Europe 2.0L 01/63-07/73
911 (carb.) USA 2.0L-2.4L 08/65-07/71
911 (inj.) Europe 2.0L-2.4L 08/68-07/71
911 (inj.) USA 2.0L-2.4L 08/68-07/71
911 Europe 2.7L 08/73-07/75
911 Europe 3.0L 08/77-07/83
911 USA Federal 2.7L 08/74-07/75
911 USA Federal 3.0L 08/77-07/78


LONG LIFE
Made using AISI 321/EN4531 titanium stabilized stainless steel  the expected life in the severest road conditions (salt) is 20-30 years.

HIGHER POWER OUTPUT
Output is increased particularly in the low and middle RPM ranges. The design makes power by minimizing intake charge disturbances at valve overlap, and increasing the exhaust gas extraction effect. The volumetric efficiency, and thereby the power output is increased. The SSI headers are significantly improved versions of the basic header design used by Porsche on all normally aspirated six cylinder competition engines.

CARBON MONOXIDE SAFE
Unlike all other aftermarket heat exchangers, the SSI heat exchanger headers are made to minimize the possibility that engine produced acids will internally corrode the enclosed primary tubes, thereby allowing carbon monoxide to enter the passenger compartment. The AISI 304 stainless steel tubing is highly resistant to the byproducts of combustion. SSI use only one piece primary tubes, eliminating the possibility of hand-made welds cracking, and the resulting carbon monoxide leaks.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133091911SSI

您正在查看的产品与这些编号存在交叉引用关系

Heater Hose Pipe from Heat Exchanger.


Fits:
Porsche 911/911S/Carrera 3.0 1975-77
Porsche 911 SC 1978-83

Click 'zoom in' for large parts diagram.
Diagram ref no 22

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91121155300

您正在查看的产品与这些编号存在交叉引用关系

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (non Turbo)
Porsche 993 All
Porsche 996 (non Turbo)
Porsche 997 (non Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SL-In-12

您正在查看的产品与这些编号存在交叉引用关系

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 12 x Studs, Nuts & Washers

Fits:
Porsche 911 1965-77
Porsche 964 (none Turbo)
Porsche 993 All
Porsche 996 (none Turbo)
Porsche 997 (none Turbo)
Porsche 986 All
Porsche 987 All
Porsche 718 4 Cyl Turbo

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SL-Ti-121

您正在查看的产品与这些编号存在交叉引用关系