线束/电缆
This harness connects to the DME computer on the 3.2 Carrera models from '86 to the end of '89. It connects to several engine sensors including the air flow sensor, o2 sensor, engine speed sensor, etc.
It uses all the proper shielded cables to improve the accuracy of signals coming from the engine. Unlike some competitors, no connectors need to be re-used from original harnesses.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1A
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161217309
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 911 3.2 Carrera - 1984 to 1985
DME harness for Carrera 3.2
Complete harness with 35PIN ECU/DME connector to Motronic Box
• Female connector to injector harness (chassis part is NLA and needs to be re-used from your old harness)
The reason for requiring the donor harness is that some of the unique components required to manufacture a new harness are no longer available, or no longer being reproduced.
Connectors for:
• Cylinder head temp sensor
• Reference mark sensor
• Speed sensor
• Oxygen sensor
• Test connector
• Air flow sensor
• Idle speed positioner
• Idle speed switch
• Throttle valve switch
• RPM signal/Shift light
• Altitude sensor
Comes with detailed connection diagram.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1A
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161217307
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 3.2 Carrera - 1984 to 1986
Complete engine harness with 14 pole female connector, fan connector, generator boots, backup switch boot, cable entry block etc.
Comes with an 100% as original cable entry boot included.
As original coloured wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160701600
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 3.2 Carrera - 1984 to 1985
Injector harness for 3.2 engine with 6 "quick release" Bosch timer connectors for easy connecting and disconnecting.
6 pole male connector included.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91160717403
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 3.2 Carrera - 1984 to 1986
Fuel pump harness from the fusebox to front fuel pump.
Grommets and fuel pump connection boots included.
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161207215
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 911 1974-86
Click 'Zoom in' for large parts diagram.
Diagram ref no 19
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91161204700
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 924S - 1986 to 1988
Porsche 944 - 1982 to 1991
Porsche 944 turbo - 1985 to 1991
Porsche 968 - 1992 to 1995
Porsche 911 - 1984 to 1989
Connector will fit Bosch units
0 281 200 076
0 281 200 050
Connector List:
- 35 Pin ECU Connector
- Wire Seals
- JPT Terminals
- Connector Screws
Features:
After three decades of heat and extreme environmental conditions, the connectors and wires become extremely brittle and fragile and can break. Oftentimes, they break by just unplugging them. This can cause signal loss and prevent your engine from starting.
This OEM+ replacement kit will replace the stock ECU Bosch DME connector.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94461200207
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 944 S - 1987 to 1988
Porsche 944 S2- 1989 to 1991
Connector will fit Bosch units
0 281 200 195
Connector List:
- 55 Pin ECU Connector
- Wire Seals
- Terminals
- Connector Screws
Suitable for Bosch Motronic
M1.3 / M1.5 / M1.52 / M1.54
MP5.1 / MP5.2 / MP7 / M2.5 / M2.7 /M2.10
Features:
After three decades of heat and extreme environmental conditions, the connectors and wires become extremely brittle and fragile and can break. Oftentimes, they break by just unplugging them. This can cause signal loss and prevent your engine from starting.
This OEM+ replacement kit will replace the stock ECU Bosch DME connector.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
94461812405
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91