扭力杆
- 21mm
- 22mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Center less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1S166911F
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 87-89 G50 Gearbox cars - Rear
Available in 5 sizes:
- 27mm
- 29mm
- 30mm
- 31mm
- 33mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Center less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1S166911TR
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Plated/Plugged 26mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1-PP911R26
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Plated/Plugged 29mm, PAIR
Fits:
For G50 Transmission
Porsche 911/912/930 1987-89
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1-PP911RT29
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Plated/Plugged 27mm, PAIR
Fits:
Porsche 911/912/930 1965-86
Porsche 356 A / 356 B / 356 Pre-A, C And CS Read Notes* (1948-65)
Our Plated & Plugged Hollow torsion bars are the best available. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection.
Excellent quality control means proper spline fit and spring-rate consistency bar-to-bar. Inferior quality competing bars fail on all counts.
• Hollow, light weight
• Plated & Plugged
• Consistent spring rate
• Great spline fit
Upgrade Hollow bars provide a nice weight savings over equivalent spring rate solid bars, especially true of the heavier rear bars. This is a great way to trim extra pounds from the back of your car.
* The size given is a solid-bar-equivalent. Actual hollow bar measures about. 5mm larger.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1-PP911R27
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Sold per kit, 1 kit req'd per car.
Fits:
Porsche 911/912/930 1965-89
Porsche 914 1970-76
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
209202
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold per kit, 1 kit req'd per car.
Fits:
for G50 Transmission
Porsche 911 / 930 1987-89
QuickChange Torsion Bars are Plated & Plugged and include a female threaded end that you can engage with a bolt to use as a handle for easier extraction / insertion.
Use the rears bars in combination with our QuickChange™ Spring Plate products for fast torsion bar swapping and re-indexing. QuickChange™ Torsion Bars can be extracted through the QuickChange™ Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!
A QuickChange™ Insert is available separately for converting your existing hollow torsion bars.
QuickChange™ Torsion Bars make it easy to dislodge a stuck bar, and thereby offer benefits even when used on the front and with factory spring plates (factory spring do not allow the bars to be extracted without removing the plates).
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
21021
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
使用性能升级扭力杆升级您的保时捷悬架:技术规格和优势
性能升级扭力杆的技术规格:
- 性能升级扭力杆是保时捷悬架系统的重要组成部分。
- 它们是扭力杆悬架系统的一部分,负责支撑车辆的重量并提供稳定性。
- 性能扭力杆通常由热处理合金钢等优质材料制成,具有更高的强度和耐用性。
- 性能升级扭力杆可作为保时捷车型的售后升级或标准替代品。
升级或更换保时捷性能升级扭力杆的好处:
增强的悬架性能:性能升级的扭力杆提供了更高的刚度和更好的操控特性,从而实现了更精确的控制和更好的抓地力。
可调节性:一些性能扭力杆具有多个调节位置,可让您根据驾驶偏好或特定轨道条件微调悬架设置。
改善重量分布:升级到性能扭力杆可以帮助优化前后轴的重量分布,从而提高转弯时的平衡性和稳定性。
提高耐用性:与标准扭力杆相比,性能扭力杆旨在承受更高的负载并提供更高的耐用性,即使在苛刻的驾驶条件下也能确保持久的性能。
提高行驶高度的潜力:根据具体的扭力杆升级,您可以选择调整保时捷的行驶高度,以实现更具侵略性的姿态和更好的空气动力学性能。
在 Design911,我们专门为您的保时捷提供正确的零件和专业建议。我们提供专为保时捷车型设计的各种性能升级扭力杆,包括售后升级和 OEM 更换。我们知识渊博的团队可以根据您的保时捷车型、年份和特定的悬架要求帮助您选择合适的扭力杆。我们了解实现最佳悬架性能和操控特性的重要性,我们可以指导您选择最适合您需求的扭力杆。凭借我们的专业知识和对客户满意度的承诺,我们可以帮助您提高保时捷的悬架精度、稳定性和整体驾驶体验。立即联系我们,享受我们的全面支持并获得根据您的要求量身定制的高质量零件。
- 支撑架
- 防侧翻稳定杆
- 前控制臂
- 后控制臂
- 后悬挂连接杆
- 发动机支架
- 变速箱座
- 前侧车顶支架
- 后侧车顶支架
- 转向横拉杆
- 弹簧板
- 球形接头
- A 型摇臂
- 前副车架
- 后副车架
- 防翻架
- Bilstein SPORT B6 减震器
- Bilstein SPRINT B8 减震器
- Ohlins 道路及赛道悬架
- Koni 运动系列
- 经典 |Safari及避震悬架套件
- 赛车运动及赛道
- SuperPro 聚氨酯衬套
- Powerflex 聚氨酯衬套
- Powerflex 黑色系列衬套
- Powerflex 传统系列
- Spax 悬架
- KW 变体 3 Inox 可调悬架套件
- KW Clubsport 避震悬架套件(带车顶支架)
- KYB 悬架