前履带控制臂
![porsche porsche](/uploads/images/car_logo/porsche.gif)
(Shaft size 255mm without ball joint)
Fits:
Porsche 928 1978-85
Price is for each
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92834703110
您正在查看的产品与这些编号存在交叉引用关系
![保时捷原厂零件 保时捷原厂零件](/uploads/images/badges/porschepartthree.png?width=80&height=80)
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
![由供应商供货 由供应商供货](/images/yellow_dot.png)
![安全购物 安全购物](/uploads/images/badges/CHINA_ShopSecurely.png?width=80&height=80)
![12 个月保修 12 个月保修](/uploads/images/badges/CHINA_12warranty.png?width=80&height=80)
![全球交付 全球交付](/uploads/images/badges/CHINA_WorldwideDelivery.png?width=80&height=80)
![价格匹配承诺 - 如果找到更优惠的价格,请致电或发送电子邮件给我们 价格匹配承诺 - 如果找到更优惠的价格,请致电或发送电子邮件给我们](/uploads/images/badges/CHINA_pricematch.png?width=80&height=80)
Track rod for steering rack. Porsche 928 1978-85 (Shaft size 255mm without ball joint) Price is each
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92834703110
您正在查看的产品与这些编号存在交叉引用关系
![最佳产品 最佳产品](/uploads/images/badges/bestproduct.png?width=80&height=80)
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
![库存 库存](/images/green_tick.png)
![安全购物 安全购物](/uploads/images/badges/CHINA_ShopSecurely.png?width=80&height=80)
![12 个月保修 12 个月保修](/uploads/images/badges/CHINA_12warranty.png?width=80&height=80)
![全球交付 全球交付](/uploads/images/badges/CHINA_WorldwideDelivery.png?width=80&height=80)
![价格匹配承诺 - 如果找到更优惠的价格,请致电或发送电子邮件给我们 价格匹配承诺 - 如果找到更优惠的价格,请致电或发送电子邮件给我们](/uploads/images/badges/CHINA_pricematch.png?width=80&height=80)
(轴尺寸 270mm,无球窝接头)
#保时捷#
适合:
保时捷 928 1986-95
转向齿条通过两个横拉杆控制前轮,横拉杆末端是可更换的接头——“横拉杆端”,与旋转轮毂相连。这些接头最终会磨损,导致转向和操控问题,并成为英国 MOT 的缺陷点,可能也是其他国家法定检验的缺陷点。
单击“放大”可查看大部件图。
图表参考编号 4
请注意,图片可能与实际物品不同。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92834703109
您正在查看的产品与这些编号存在交叉引用关系
![保时捷原厂零件 保时捷原厂零件](/uploads/images/badges/porschepartthree.png?width=80&height=80)
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
![库存 库存](/images/green_tick.png)
![安全购物 安全购物](/uploads/images/badges/CHINA_ShopSecurely.png?width=80&height=80)
![12 个月保修 12 个月保修](/uploads/images/badges/CHINA_12warranty.png?width=80&height=80)
![全球交付 全球交付](/uploads/images/badges/CHINA_WorldwideDelivery.png?width=80&height=80)
![价格匹配承诺 - 如果找到更优惠的价格,请致电或发送电子邮件给我们 价格匹配承诺 - 如果找到更优惠的价格,请致电或发送电子邮件给我们](/uploads/images/badges/CHINA_pricematch.png?width=80&height=80)
(Shaft size 270mm without ball joint)
![oematch oematch](/uploads/images/car_logo/oematch.gif)
Fits:
Porsche 928 1986-95
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
92834703109
您正在查看的产品与这些编号存在交叉引用关系
![最佳产品 最佳产品](/uploads/images/badges/bestproduct.png?width=80&height=80)
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
![库存 库存](/images/green_tick.png)
![安全购物 安全购物](/uploads/images/badges/CHINA_ShopSecurely.png?width=80&height=80)
![12 个月保修 12 个月保修](/uploads/images/badges/CHINA_12warranty.png?width=80&height=80)
![全球交付 全球交付](/uploads/images/badges/CHINA_WorldwideDelivery.png?width=80&height=80)
![价格匹配承诺 - 如果找到更优惠的价格,请致电或发送电子邮件给我们 价格匹配承诺 - 如果找到更优惠的价格,请致电或发送电子邮件给我们](/uploads/images/badges/CHINA_pricematch.png?width=80&height=80)