Fog/Drive Lamps

Fog lamp inserts, Pack of 2.



Fits:
Porsche 944 1986-91


Left or Right
Select below please

Click 'zoom in' for large parts diagram.
Diagram ref no 7.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95163193

您正在查看的产品与这些编号存在交叉引用关系

Fog lamp lens, Front - Insert only



Fits:
Porsche 944 S2 1985-89
Porsche 944 Turbo 1985-91


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95163122

您正在查看的产品与这些编号存在交叉引用关系

Fog lamp unit. FRONT
Lens complete with the backing.



Fits:
Porsche 944 S2 1985-89
Porsche 944 Turbo 1985-91


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95163121

您正在查看的产品与这些编号存在交叉引用关系

Foglamp adjuster actuator repair set. 
One set per lamp - 2 required per car



Fits:
Porsche 944 S2 - 1989 to 1991
Porsche 944 turbo - 1986 to 1991
Porsche 928 S4 / GTS - 1987 to 1995

Are you unable to adjust the fog lights of your Porsche 944 or 928? 

Then most probably your fog light adjusting actuators have been damaged. These actuators are needed for the adjustment and if they are broken, the fog light can no longer be adjusted correctly. Fortunately we have the solution with this set and you can repair your fog light so you do not have to buy a complete new lens. 
The actuators are made of Nylon, which is reinforced with carbon fibres. This provides a higher strength than the original plastic and is comparable in strength to aluminium. We have also improved our original design to make it stronger so that the actuator is less likely to break in future. 

The actuators are suitable for the 944 turbo / S2 and for the 928 S4, GT and GTS. 

With one set you can repair one fog light. 

Please Note
Lamp lens not included

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95163122100

您正在查看的产品与这些编号存在交叉引用关系

Front Bumper Light Frame.



Fits:
Porsche 944 1982-91

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93150519

您正在查看的产品与这些编号存在交叉引用关系

Front fog lamp housing panel. 
Fits left or right hand side.   

Contents: 

• 1x Fog lamp housing 
• 4x new bolts for glass mounting
• 3x new mounting bolts for mounting housing in bumper
• 1x Sealing rubber for a moisture-free lamp
  
  
  
  

Fits:
Porsche 944 S2
Porsche 944 turbo
Porsche 928 S4
Porsche 928 GTS

When disassembling the fog/driving lamp unit, the mounting bolts often break off due to rust or the lamp housing fastening points break off and the metal inserts in the original housing get stuck due to corrosion and cannot be removed. Drilling out the metal inserts is almost impossible and takes a lot of time. 

This problem has been solved with this new lamp housing, so no more trouble with rusted bolts. There are no metal inserts in this fog lamp housing that can rust and the housing is extremely strong.

The original housing is no longer available.

Note: The fog lamp housing is suitable for both the left and the right hand side.

The drain on the back can be disassembled from the old housing and mounted on the new one. 

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92863140500

您正在查看的产品与这些编号存在交叉引用关系