后控制臂

Rear Trailing Arm bushing for Porsche 964



Finally a way to replace the rubber trailing arm bushings without buying new trailing arms. This is a complete kit that includes rubber bushings, metal cores, pressing tools, and lubricant. Everything you need to replace bushings on a pair of 964 trailing arms.

Price is SET OF 2 (Complete for one car)

Fits:
Porsche 964

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2290019

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Rear Trailing Arm Front Bush
SET OF 2 for both sides



Fits:
Porsche 964 Carrera 2/4, Turbo & RS 1989-1994

Fitting Instructions >> Click Here

Click 'Zoom in' for large parts diagram.
Fits to No 1 on the diagram.


The original bush is no longer available from Porsche except if brought with the rear arm which costs in excess of £1000.00. With the cars been over 15 years old if these bushes have not been replaced they could be causing all sorts of geometry problems, leading to excessive tyre wear, handling problems, knocking etc.

Powerflex developed the replacement bush with similar torsional characteristics to the RS version, which is up-rated over the rest of the models in the range. Included in the low compliance design are 2 OilLite bearings allowing the arm to pivot around the central sleeve with minimal drag.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-106

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Black Series Rear Trailing Arm Front Bush
SET OF 2 for both sides



Fits:
Porsche 964 Carrera 2/4, Turbo & RS 1989-1994

Fitting Instructions >> Click Here

Click 'Zoom in' for large parts diagram
Fits to No 1 on the diagram.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-106BLK

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Heritage Collection Rear Trailing Arm Front Bush
SET OF 2 for both sides



Fits:
Porsche 964 Carrera 2/4, Turbo & RS 1989-1994

Fitting Instructions >> Click Here

Click 'Zoom in' for large parts diagram.
Fits to No 1 on the diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-106H

您正在查看的产品与这些编号存在交叉引用关系

Split bushing removal tool. 1 req'd per lifetime.



Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms

Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)

It used to be a difficult task

This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.

Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.

Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.

Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.

Combine with bushing installation tools part #2020904 to complete the job.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2020903

您正在查看的产品与这些编号存在交叉引用关系