转向横拉杆
按品牌过滤
Track rod complete with centre bar. Porsche 964 1989-94
代码: 96434703200/2KIT
Track Rod complete with centre bar
SET OF 2
Fits
Porsche 964 C2 / C4 / RS 1989-94
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434703200
您正在查看的产品与这些编号存在交叉引用关系
SET OF 2
Fits
Porsche 964 C2 / C4 / RS 1989-94
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434703200
96434703200
96434703202
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
€68.90
当前 €65.45
即将抵达
Bump steer correcting tie rod kit. Porsche 964 W/O RS Wheel Carriers
代码: 2180031
Bump steer correcting tie rod kit.
Bump geometry correction. 1 kit, req'd per car.
For Porsche 964 1989-94 W/O RS Wheel Carriers
Lowered cars with non-RS wheel carriers suffer from bump steer and will benefit from bump geometry correction.
Bump steer is a change in toe due to vertical movement of the wheel, such as when driving over a bump. The toe change causes the car to turn, and the driver needs to constantly correct for this to maintain a steady trajectory. This makes the car a handful to drive, especially over bumpy road surfaces.
Bump correction is achieved by moving the tie rod end pivot about 10mm closer to the steering knuckle as compared to the stock tie rod end. This changes the angle of the tie rod to produce the bump geometry correction.
No Need To Convert Wheel Carriers
This Bump Steer Correcting Tie Rod kit provides bump geometry correction with the standard C2/C4 wheel carriers. It is not necessary to convert the wheel carriers to RS type to correct for bump steer when using our kit.
These Elephant Racing bump steer tie rods also eliminate the compliant rubber inner-joint found in the factory 964 tie rods with a spherical bearing providing a more direct and responsive steering feel. Thus, proper suspension geometry is restored, driver corrections are minimized, and vehicle trajectory is stabilized making driving control easier while reducing driver fatigue.
Out Performs All Other Tie Rods
Even on cars fresh from the Porsche factory assembly lines our anti-bump steer kit will reduce bump steer through the full range of motion.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2180031
您正在查看的产品与这些编号存在交叉引用关系
Bump geometry correction. 1 kit, req'd per car.
For Porsche 964 1989-94 W/O RS Wheel Carriers
Lowered cars with non-RS wheel carriers suffer from bump steer and will benefit from bump geometry correction.
Bump steer is a change in toe due to vertical movement of the wheel, such as when driving over a bump. The toe change causes the car to turn, and the driver needs to constantly correct for this to maintain a steady trajectory. This makes the car a handful to drive, especially over bumpy road surfaces.
Bump correction is achieved by moving the tie rod end pivot about 10mm closer to the steering knuckle as compared to the stock tie rod end. This changes the angle of the tie rod to produce the bump geometry correction.
No Need To Convert Wheel Carriers
This Bump Steer Correcting Tie Rod kit provides bump geometry correction with the standard C2/C4 wheel carriers. It is not necessary to convert the wheel carriers to RS type to correct for bump steer when using our kit.
- Corrects for bump steer
- Eliminates rubber inner-joint
- Enhanced driving precision
- Easier and more cost effective than RS wheel carrier conversion
These Elephant Racing bump steer tie rods also eliminate the compliant rubber inner-joint found in the factory 964 tie rods with a spherical bearing providing a more direct and responsive steering feel. Thus, proper suspension geometry is restored, driver corrections are minimized, and vehicle trajectory is stabilized making driving control easier while reducing driver fatigue.
Out Performs All Other Tie Rods
Even on cars fresh from the Porsche factory assembly lines our anti-bump steer kit will reduce bump steer through the full range of motion.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2180031
2180031
96434703200
96434703202
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
€774.69
当前 €759.20
即将抵达
Outer tie rod set RSR style. Porsche 964 BBi Autosport
代码: BBI96440100
BBi Porsche RSR style outer tie rod.
Set of 2
Enhance the handling of your Porsche's steering system with our BBI Porsche 964 993 RSR Type Outer Tie Rod. These outer tie rods feature a Teflon-lined spherical joint that offers improved feedback compared to OE parts. Not only that but they are specifically designed to assist in adjusting bump steer, making them an essential upgrade for both canyon carving and track enthusiasts.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BBI96440100
您正在查看的产品与这些编号存在交叉引用关系
Set of 2
Enhance the handling of your Porsche's steering system with our BBI Porsche 964 993 RSR Type Outer Tie Rod. These outer tie rods feature a Teflon-lined spherical joint that offers improved feedback compared to OE parts. Not only that but they are specifically designed to assist in adjusting bump steer, making them an essential upgrade for both canyon carving and track enthusiasts.
Fits:
Porsche 964
One piece outer tie rods with a Teflon lined spherical provide better feedback and longevity over OE parts. Designed to also aid in adjustment of bump steer these are a must-have for track enthusiasts.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BBI96440100
96434705800
96434705804
96434703200
96434703201
9643470320
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
价格低至: €825.32
RSR style inner tie rod. Porsche 964 / 993 1989-97 BBi Porsche
代码: 99334703105/3
BBi Porsche RSR style inner tie rod.
Set of 2
Fits:
Porsche 964 1989-1994
Porsche 993 1994-97
These tie rods provide more consistent and firmer feedback without increase of NVH (noise, vibration and harshness)
These are a required upgrade for 964 owners looking to run our billet uprights
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99334703105
您正在查看的产品与这些编号存在交叉引用关系
Set of 2
Fits:
Porsche 964 1989-1994
Porsche 993 1994-97
These tie rods provide more consistent and firmer feedback without increase of NVH (noise, vibration and harshness)
These are a required upgrade for 964 owners looking to run our billet uprights
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99334703105
99334713101
99334703105
96434705800
96434705804
99334703102
99334703103
99334703104
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
€483.33
当前 €473.66
即将抵达
转向垫片/限制块。保时捷 964
代码: 96434732502
转向垫片/限制块。
#保时捷#
适合:
保时捷 964 Turbo 外观
保时捷 964 涡轮增压
单击“放大”查看大零件图。
图参考号 17。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434732502
您正在查看的产品与这些编号存在交叉引用关系
#保时捷#
适合:
保时捷 964 Turbo 外观
保时捷 964 涡轮增压
单击“放大”查看大零件图。
图参考号 17。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434732502
96434732502
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
价格: €43.41
库存
带中心杆的转向横拉杆。保时捷 964 1989-94
代码: 96434703200
横拉杆与中心杆配套。
#保时捷#
适合
保时捷 964 C2 / C4 / RS 1989-94
转向齿条通过两个横拉杆控制前轮,横拉杆末端是可更换的接头——“横拉杆端”,与旋转轮毂相连。这些接头最终会磨损,导致转向和操控问题,并成为英国 MOT 的缺陷点,可能也是其他国家法定检验的缺陷点。
请注意:价格为每个价格。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434703200
您正在查看的产品与这些编号存在交叉引用关系
#保时捷#
适合
保时捷 964 C2 / C4 / RS 1989-94
转向齿条通过两个横拉杆控制前轮,横拉杆末端是可更换的接头——“横拉杆端”,与旋转轮毂相连。这些接头最终会磨损,导致转向和操控问题,并成为英国 MOT 的缺陷点,可能也是其他国家法定检验的缺陷点。
请注意:价格为每个价格。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434703200
96434703200
96434703202
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
价格: €179.52
库存
Track Rod complete with centre bar. Porsche 964 1989-94
代码: 96434703200/2
Track Rod complete with centre bar
Fits
Porsche 964 C2 / C4 / RS 1989-94
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Please note: Price is for each.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434703200
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 964 C2 / C4 / RS 1989-94
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Please note: Price is for each.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434703200
96434703200
96434703202
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
€34.45
当前 €33.42
即将抵达
Track rod end. Porsche 964 1989-94
代码: 96434732202/2
Track rod end. Porsche 964 1989-94
Fits
Porsche 964 1989-94 all models
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Price is for each
Please note the image may be different to the actual item.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434732202
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 964 1989-94 all models
The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.
Price is for each
Please note the image may be different to the actual item.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434732202
96434732202
19921 02
1992102
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€33.32
当前 €32.32
库存
横拉杆内接头。保时捷 964 C4 / RS
代码: 96434705804
横拉杆内接头
#保时捷#
适合:
保时捷 964 C4 1989-94
保时捷 964 RS
价格为每个
点击图片查看大部件图。图号 3。
请注意,图片可能与实际物品不同。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96434705804
96434705804
96434705800
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
价格: €252.11
库存
显示从1到9(共9个产品)
也可在这些页面找到
您可能也喜欢
流行车型