Brembo 运动刹车片
Reliability and high quality
Brembo Racing | SPORT | EVO 500++ brake fluid is ideal in all conditions, fit for all, from everyday driving to non-professional intermediate use on the track.
This is a reliable high quality fluid that improves pedal feel and consistent braking performance without the frequent inspection intervals of a full racing brake fluid.
Formulated for real enthusiasts
- Suitable for use in braking systems designed for non-mineral fluids.
- Purposely designed to meet the expectations of enthusiasts who demand a lot from their system.
- Exceeds the requirements of specification U.S. FMVSS No.116 DOT 3 and DOT 4, SAE J1703, SAE J1704 and ISO 4925 (classes 3 and 4).
- Compatible with other DOT 3, DOT 4 and DOT 5.1 brake fluids, as long as they comply with the above specification.
For safety reasons, it is recommended to replace your brake fluid at least once a year. Not Suitable for vehicles with mineral oil systems. Colour range: appearance from transparent to amber. In the case of new brake fluid, when poured out from the sealed bottle, the colour may differ from the range, but the performance remains the same.
库存 
This high temperature brake fluid designed for the most extreme racing conditions.
It has a dry boiling point of 335° C which is around 25° C higher than a typical racing brake fluid. Developed exclusively for competition use, Brembo HTC 64T provides the highest performance under all racing conditions and has been used in F1, ALMS, DTM, WRC and BTCC.
Very high dry boiling point (335°C) / Wet boiling point 203°C
Ideal for competition vehicles which experience high brake temperatures
Successfully used in top level Motorsport including F1
For maximum performance it is recommended that Brembo HTC 64T is not mixed with other brake fluids.
500ml Bottle
Please Note
Must not be used in brake systems containing magnesium parts
由供应商供货
Brake Pad size: Width: 98mm / Thickness: 18mm / Height: 66mm
Information about Brake Pad Size
This Product Fits:
Porsche 911 3.3 SC Turbo & T. S 77 - 90 Front & Rear
Porsche 944 2.5 Turbo 85 - 87 Front & Rear
Porsche 944 2.7 & 3.0 S2 88 - 91 Front & Rear
Porsche 964 C2 3.6 88 - 91 Front
Porsche 964 C2 3.6 91 - 94 Front & Rear*
*will NOT fit the small 964 rear calipers Porsche 911 (964) C2 08/1989-06/1991 REAR
Porsche 964 3.6 C4 88 - 94 Front & Rear
Porsche 968 3.0 Coupe 91 - 95 Front & Rear
Porsche 928 S & S4 & GT 85 - 95 Rear
Porsche 944 2.5 Turbo 87 - 91 Rear
Porsche 964 3.6 Carrera RS 91 - 93 Rear
Porsche 964 3.3 Turbo & Turbo S 88 - 91 Rear
Porsche 968 3.0 Coupe Sport 91 - 95 Rear
Porsche 993 3.6 Carrera & C4 93 - 97 Rear
Porsche 993 3.8 Carrera & C4 95 - 97 Rear
Porsche 928 5.4 GTS 32V 91 - 95 Rear
Porsche 964 3.3/3.6 Turbo/Turbo S Rear
Porsche 968 3.0 Coupe Turbo S 93 - 95 Rear
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
07B31413
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
库存
Brake Pad size: Width: 132mm / Thickness: 18mm / Height: 71mm
Information about Brake Pad Size
This Product Fits:
Porsche 928 S & S4 & GT 85 - 95 Front
Porsche 944 2.5 Turbo 87 - 91 Front
Porsche 964 3.6 Carrera RS 91 - 93 Front
Porsche 964 3.3 Turbo & Turbo S 88 - 91 Front
Porsche 968 3.0 Coupe Sport 91 - 95 Front
Porsche 993 3.6 Carrera & C4 93 - 97 Front
Porsche 993 3.8 Carrera & C4 95 - 97 Front
Porsche 993 3.6 Turbo & Turbo GT2 95 - 97 Rear
Porsche 993 3.8 Carrera RS & RSR 95 - 97 Rear
Porsche 993 GT2 & RSR (380 disc) 95 - 97 Rear
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.bRE
Sold as set of 4 pads for one axle.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
07B31412
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
库存
Brake Pad size: Width: 132mm / Thickness: 18mm / Height: 75mm
Information about Brake Pad Size
This Product Fits:
Porsche 928 5.4 GTS 32V 91-95 Front
Porsche 964 3.3/3.6 Turbo/Turbo S Front
Porsche 968 3.0 Coupe Turbo S 93-95 Front
Porsche 993 3.6 Turbo/Turbo GT2 95-97 Front
Porsche 993 RS & RSR 95-97 Front
Tested to the highest levels on the track with decelerations from 270kph (168mph) the HP2000 material is capable of operating in the most demanding conditions.
With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.
Designed to be a direct replacement for the Original Equipment (OE) pads the Brembo sport pad comes with the exact same specification as the OE pad including (where applicable): fitted wear leads, slots for separate wear leads and anti-rattle clips with the added benefit of anti-noise shims on every pad.
Combine all of this with competitive pricing and UNECE R90 approval across the full range (making them street legal) and you get a true high performance brake pad fit for the road.
Sold as set of 4 pads for one axle.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
07B31414
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928GTS 5.4L 1992-95
库存
Brembo HP2 刹车片在所有条件下都具有出色的冷性能、良好的咬合力、出色的抗褪色性和摩擦稳定性，并且灰尘含量低。由于采用了摩擦材料，它们比竞争对手具有显着的优势。它们设计为可与原始设备刹车片 (OE) 互换，并获得 ECE-R90 认证。
Brembo SPORT 刹车片专为运动道路使用而设计和测试，是所有制动系统的第一个升级级别。该产品专为具有运动野心的驾驶员而设计，更广泛地说，是为所有希望充分利用汽车的驾驶员而设计的。这些刹车片具有高水平的制造质量，并使用只有 Brembo 才能保证的创新材料。由于特殊材料可确保在所有温度范围内保持恒定摩擦，因此即使在不预热和低速的情况下，它们也能提供出色的性能。除了提供增强的性能之外，这种材料还确保了制动盘和制动片上出色的安静性并减少磨损。
Brembo SPORT 刹车片还具有高踏板调制指数，可实现制动的全面控制。它们在 200 至 300 度之间的温度下工作效果最佳，但可以承受更高的温度（高达 600 度），并且旨在保证出色的性能，同时仍保持良好的舒适度。因此，对于希望在日常使用中获得最佳制动效果的驾驶员来说，这些刹车片是理想的刹车片，如果与 Brembo 制动盘结合使用，效果会更加有效。
