防护格栅

Front Bumper Stainless Steel Full Grille Set ZunSport. This grille set comprises: Outer Grille Set (Without Parking Sensors) and Centre Grille Set.



Fits:
Porsche 991.1 GTS (Without Parking Sensors) 2015 - 2016

Available in:
- Black
- Electro-polished


Searching for an easy to install grille set that will blend with the original design of your Porsche 991.1 GTS - Full Grille Set (Without Parking Sensors) seamlessly? Then look no further than an . Using stainless steel woven wire mesh, premium quality comes as standard and all Zunsport grilles are guaranteed for the life of your car.

We use only the best materials and craftsmanship to ensure the grilles we supply to you offer not just an aesthetically pleasing result but a vital form of defence for your vehicle's heat exchangers and brakes against road debris and leaves.

Choose Zunsport grilles and discover an enhanced appearance, and protection.

It must be noted that this grille is comprised of the stainless steel grille and the means of fixing it to your vehicle, It does not include any replacement body parts.

Additional Notes:
All grilles come complete with fitting instructions and any fitments
This is a special order item please allow 3-5 working days for delivery

Front Bumper Stainless Steel Grill Set. This grille set comprises: Centre Grille and Outer Grille Set.



Fits:
Porsche 991.1 C4 2012 - 2015

Available in:
- Black
- Electro-polished


Zunsport compatible with Porsche Carrera 991 C4

Your Porsche Carrera 991 C4 deserves the very best, and when it comes to something as instrumental to a car's appearance as its grille, quality matters.

The Front Grille Set can be fitted with ease and delivers an unrivalled seamless finish, in fact we are so confident in the materials we use and the craftsmanship we call upon to make our grilles that each set provided by us is guaranteed for the life of your vehicle.

Our stainless steel woven wire mesh blends with the original design of your car's make and model to ensure an enhanced appearance and ultimate protection against road detritus.

It must be noted that this grille is comprised of the stainless steel grille and the means of fixing it to your vehicle,It does not include any replacement body parts.

Additional Notes:
All grilles come complete with fitting instructions and any fitments
This is a special order item please allow 3-5 working days for delivery

ZunSport Front bumper stainless steel grille set. This grille set comprises: Outer Grille Set (Without Parking Sensors) and Centre Grille Set.



Fits:
Porsche 991.1 GTS (2015 - 2016) cars with ACC and Without Parking Sensors

Available in:
- Black finish
- Silver finish

Searching for an easy to install grille set that will blend with the original design of your Porsche 991.1 GTS (ACC) seamlessly? Then look no further than an . Using stainless steel woven wire mesh, premium quality comes as standard and all Zunsport grilles are guaranteed for the life of your car.

We use only the best materials and craftsmanship to ensure the grilles we supply to you offer not just an aesthetically pleasing result but a vital form of defence for your vehicle's heat exchangers and brakes against road debris and leaves.

Choose Zunsport grilles and discover an enhanced appearance, and protection.

It must be noted that this grille is comprised of the stainless steel grille and the means of fixing it to your vehicle, It does not include any replacement body parts.

Additional Notes:
All grilles come complete with fitting instructions and any fitments
This is a special order item please allow 3-5 working days for delivery

Zunsport Front bumper stainless steel full grille set. . This grille set comprises: Centre Grille and Outer Grille set.



Fits:
Porsche 991 GTS 2015 - 2016 (cars with ACC and Parking Sensors)

Available in:
- Black finish
- Silver finish

Road debris and leaves can cause major damage to your vehicle's heat exchangers, fans and brakes if left unprotected, but if you own a Porsche 991.1 GTS (ACC) - Full Grille Set (With Parking Sensors) our can guarantee a number of advantages on the road.

Protect your vehicles essential components from damage, discover easy installation and enjoy a seamless finish that suits your car's original design by purchasing a grille set from us.

We use premium stainless steel woven wire mesh and a handcrafted approach with every grille that leaves the Zunsport workshop, and each is guaranteed for the life of your car to give you a confidence not found with other grille manufacturers.

It must be noted that this grille is comprised of the stainless steel grille and the means of fixing it to your vehicle, It does not include any replacement body parts.

Additional Notes:
All grilles come complete with fitting instructions and any fitments
This is a special order item please allow 3-5 working days for delivery

Aluminium Black Mesh 'Diamond' Style - Mesh size: 100cm x 40cm Universal Product

Product description:

- Piece of powder coated mesh grill in size 100cm x 40cm
- Brand new product as shown in the photo below
- Hole size: 6mm x 4mm
-Thickness: 2mm
- Ideal for mounting in Bumpers, Bonnet intakes etc.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99950555555

您正在查看的产品与这些编号存在交叉引用关系

Front bumper centre grille wire mesh.



Fits:
Porsche 991.1 2012-2016

Fitting requires double sided tape

Protect that big intake on the 991.1 or add that aggressive looks and match the RGS side radiator grilles for cars without the third radiator.

Give your 911 991.1 that GT3 factory look and protect your Porsche 911 vulnerable, low front radiators from road and track debris.
No bumper removal

These do not fit the 991 GTS or Aerokit bumper cars

Grilles are powder coated black

See the video below for the installation instructions for the Porsche 911 991.1 (2012-2016) center radiator grille, shown on a 981 Cayman, same technique.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991.1CTR

您正在查看的产品与这些编号存在交叉引用关系

Front bumper side grille wire mesh kit.



Fits:
Porsche 991.1
Porsche 991.1 Carrera S
Porsche 991.1 Carrera 4S
WITH OR WITHOUT parking sensors

These metal mesh grilles (left and right) will help protect your Porsche 911 991.1 Bumper Side Radiators from road and track debris.

These grilles fit the standard Porsche 991.1 as well as the Carrera S and Carrera 4S models, with and without parking sensors.

Grilles are powder coated black

Radiator metal mesh grilles protect the expensive radiators that are so low to the ground.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

991.1

您正在查看的产品与这些编号存在交叉引用关系

Front Bumper Stainless Steel Grill Set ZunSport.

Fits:
Porsche 991 GTS 2015>> (With Parking Sensors)

Available in:
- Black
- Electro-polished

Please Select below

A grille set from Zunsport fitted to your Porsche 991 GTS will bring not only an enhanced appearance but also protection from ingress of road detritus and leaves which can cause damage to heat exchangers and corrosion to brake areas.

Zunsport grilles are made from high grade stainless steel woven wire mesh, which is then electro-polished to give a long lasting bright finish.

Each grille is made specifically for the model of car indicated and has been designed to be as easily installed as possible. In most cases no
tools are required to fit a Zunsport grille, and in all cases no alterations are required to be made to your car.

Additional Notes:
All grilles come complete with fitting instructions and any fitments
This is a special order item please allow 3-5 working days for delivery

Front Bumper Wire Mesh Grill Kit. 5
5 meshes in this kit for SportDesign bumper.

Fits:
Porsche 991/991S with Sport Design bumper WITH parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Front Bumper Wire Mesh Grill Kit - Black

Fits:
Porsche 991.1 C2 / C2S + T
Porsche 991.1 C4 / 991.1 C4S
Porsche 991.1 Turbo / 991.1 Turbo S
Porsche 991.1 Targa
Porsche 991.1 GTS

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.

Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
• Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip (some vehicle's don't require the clips, and simply install with screws) system that eliminates the need for adhesive, zip ties or other unreliable fastening technics.
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline.

* Cars with adaptive cruise control may require minor trimming with snips or scissors

Please note: ** If you select "No" to "Center Radiator", you will not recieve a center screen as there is no place to affiix it, and there is no functional reason to install it. If you plan to add a third radiator kit down the road, select "Yes" for this question.

Pictures may not reflect actual application

Rennline Front bumper wire mesh grill kit,
5 meshes in this kit for SportDesign bumper.

Fits:
Porsche 991/991S cars with Sport Design bumper WITHOUT parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application