后副车架

Eccentric adjuster locking kit.
6pcs in kit - 1 kit required per car



Fits
Porsche 993 - All

Prevent Alignment Settings From Slipping

Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.

Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.

Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.

Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.

Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.

The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180019

您正在查看的产品与这些编号存在交叉引用关系

HD Rear subframe bushing. racing version
Complete set (4 pcs). 2 sets needed for one car.



Fits:
Porsche 993 1995-98 all models

Increase rear end stability and extend the life of your alignment with High Density subframe mounts. Factory units can cause rear ends to become more 'twitchy' and nervous, especially under high suspension loads, especially as they begin to fail. These bushings are not only responsible for holding the entire rear subframe to the shell, but for locating it in relation to the body and other suspension components. This means that even if they have not totally fallen apart the stock, soft mounts can often allow the entire rear suspension to shift and realign itself and as a result your entire car. Made from heavy duty high durometer rubber which features a 25% increase in stiffness over OE units, our High Density bushing kit includes the aluminum inner core and outer casement making them a plug and play solution for your 993. Enjoy a more planted rear end and stop living at the alignment shop with this full rear subframe kit.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99333105100

您正在查看的产品与这些编号存在交叉引用关系

Adjutable rear axle solid bushing set.
This set allows you to lower the suspension -25mm from the original height.



Fits:
Porsche 993

Material:
6082-T6 Aluminium

Click 'Zoom in' for large parts diagram.
Outlined in green on diagram.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9P-0193

您正在查看的产品与这些编号存在交叉引用关系

HD Rear subframe bushing. street version
Complete set (4 pcs). 2 sets needed for one car.



Fits:
Porsche 993 1995-98 all models

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99333105100

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Rear Subframe Mounting Bush.
Sold as a pack of 4 (both subframes)



This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-920

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Black Series Rear Subframe Mounting  Bush.
Sold as a pack of 4 (both subframes)



This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-920BLK

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Heritage Collection Rear Subframe Mounting Bush.
Sold as a pack of 4 (both subframes)



This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-920H

您正在查看的产品与这些编号存在交叉引用关系

Rear suspension side section bushing kit.
4 pcs in kit - 2 kits required per car



Fits
Porsche 993 - All 1994 - 1998

Replaces the rubber bushings on the rear 993 side panels.

Stock hardness – Restores performance and ride quality to original.

Sport-hardness – Firmer rubber more precisely locates suspension members under load, without the noise and vibration associated with solid metal alternatives.

Each side panel has 4 rubber bushings, for a total of 8 bushings per car.
Each kit includes 4 bushings, order 2 kits per car

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

229001

您正在查看的产品与这些编号存在交叉引用关系

Rennline solid rear subframe kit and tilt kit.



Fits:
Porsche 993

Factory rubber suspension mounts have a lot of flexibility and cannot withstand the extreme loads applied to them during performance driving conditions. When these mounts flex, all of the suspension geometry changes making the car unstable and unpredictable. A very popular suspension upgrade is to replace these bushings with solid mounts like the ones found on the factory race cars. These kits are machined out of billet aluminum and come with the required hardware to install.

This kit can be purchased as a Solid Sub Frame Mount Kit or as a Solid Sub Frame/Tilt Kit as found on the factory 993GT2 race cars.

For Fitting Instruction please CLICK HERE

Note: Pictures may not show actual product.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SB656676

您正在查看的产品与这些编号存在交叉引用关系

Solid Rear Subframe Bushing Kit.


Fits:
Porsche 993

Factory rubber suspension mounts have a lot of flexibility and cannot withstand the extreme loads applied to them during performance driving conditions. When these mounts flex, all of the suspension geometry changes making the car unstable and unpredictable. A very popular suspension upgrade is to replace these bushings with solid mounts like the ones found on the factory race cars. These kits are machined out of billet aluminium and come with the required hardware to install.


Note: Pictures may not show actual product.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SB5876

您正在查看的产品与这些编号存在交叉引用关系

Solid subframe bushing set. Precision Handling - REAR
1 kit required per car.



Fits:
Porsche 993 1995-98

Stock rubber bushings compress and deform under heavy cornering, braking, and acceleration loads. The compliant rubber bushings allow the entire rear subframe shift about relative to the chassis. Rear camber and toe settings wander along with the subframe making the car less predictable, less stable in turns.

Our solid bushings replace the compliant rubber and do not deform under cornering loads, keeping the subframe in position and alignment true even under heavy cornering loads. The car becomes more predictable and easier to drive fast.

Corrects Geometry
Raises the subframe by 10mm to improve geometry and camber curve on lowered cars.

Build Quality
Each bushing consists of two pieces… identical upper and lower pucks.

Each piece is precision machined from high-strength aluminium with an anodized finish for protection.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2290037

您正在查看的产品与这些编号存在交叉引用关系