催化剂/旁路

AWE Performance exhaust cross over pipes.



Fits:
Porsche 997.2 (911) Carrera / S 3.6L - 3.8L

• Power Enhancement Bolt On
• P6.5lbs weight savings
• P5hp and 5 lb ft increase
• P100% T304 Stainless Steel Construction
• PPerfect Fitment - Guaranteed

For 2009-> 997.2 owners looking to eliminate the rear muffler, we offer Cross Over Pipe sections ...

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3010-11010

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed Exhaust cat-back competition race x-pipe.



The ultimate lightweight cat-back exhaust system for the 997.2 GT3 saves 54lbs (24.4kg) off the rear of the vehicle and is perfect for competitive track use, high performance drivers education events, or aggressive street sound.

FEATURES:

• Fits all Porsche 997.2 GT3 / GT3 RS models (2010-2011)
• Perfect exhaust solution for maximum performance and sound during competitive track use, high performance drivers education events, or simply achieving an aggressive and exciting street sound.
• Saves over 54lbs (24kg) from the rear of the 997.2 GT3 which improves handling and acceleration by replacing the bulky factory center muffler and side mufflers
• Engineered and manufactured with 3" (76mm) T304L stainless steel tubing with integral tuned center X-Pipe to 70mm outlets.
• Bolt-on installation' no cutting or welding required
• Options of 4" Carbon Fiber Tips or 4" Stainless Steel Brushed Tips
• Includes two (2) 90 degree Turndown Tips for track use.
• All Fabspeed performance products are backed by Fabspeed's Limited Lifetime Warranty

NOTE: This is a straight pipe, racing oriented exhaust system built to be light and make power. As a result, the volume level will be very high inside the vehicle.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR9972GT3CRX

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Centre Muffler Bypass Pipe



Direct replacement for the failure-prone OEM muffler providing improved flow, weight savings, and aggressive sound. Our new talk-pipe design blends the exhaust from the right and left cylinders creating an incredible smooth blended sound, and our simplified two-bolt mounting system makes installing easier than ever!

FEATURES:

• Fits all Porsche 997.2 GT3 / GT3 RS vehicles (2010-2012)
• Adds 10 whp and 6 ft-lbs of torque increasing throttle response
• Saves 10 lbs from the rear of the vehicle
• Retains Sport Mode control button when used with factory side mufflers
• 14-16ga T304 Stainless Steel construction
• Includes 4" Deluxe Dual Style Tips in your choice of Carbon Fiber, Polished Stainless or Satin Black, or you can opt to use your OEM tips
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR9972GT3CMB

您正在查看的产品与这些编号存在交叉引用关系

DesignTek Headers Cat Bybass



Fits:
Porsche 997 GT3 / GT3RS 2007>>

High quality T304 Stainless steel equal length headers C.N.C. mandrel bent, computer numerical controlled mandrel bending equipment. The headers come complete with the provision for the before and after lambda sensors. As the vehicle will not be using the reading from these sensors the ECU will need to be re-programmed or re-mapped.
The Designtek are designed for maximum flow with no restriction. The headers are designed to produce more torque and horsepower across the Rev range. This products is designed for track cars and highly tuned vehicles

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606309706

您正在查看的产品与这些编号存在交叉引用关系

Exhaust manifold with cat bypass. These headers are offroad use only.



Fits:
Porsche 997.2 Carrera 2009-12

Made out of 304 grade stainless steel and would provide gains of 15 BHP. Remapping of the car after fitment is highly recomended.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606109978

您正在查看的产品与这些编号存在交叉引用关系

Lambda Sensor Blanking Plug and Receiver Socket Set.
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.


Fits:
Many Porsche vehicles. Universal kit.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

100390100392

您正在查看的产品与这些编号存在交叉引用关系

DesignTek Sport Center Section for 997GT3, 997GT3 RS and GT3 Cup cars - Stainless Steel Polished with Matt Black pipes



This sports centre sections is a direct bolt on replacement, you don't even need to removal of bumper, Proprietary megaphone design- mandrel bent tubing which saves 14 lbs over the stock center section ( GT3 , RS with Ti center muffler saves 5 lbs )
Sport button remains fully functional for every day use, absolutely NO modifications. This system offers a deep aggressive exhaust note over the Porsche stock system the factory primary mufflers, catalyst and exhaust flaps are all retained

The DesignTek Sport Center Section system is a direct bolt on replacement center section which reduces weight, improves sound and offers a mild increase in performance. Porsche has done a wonderful job with the design and manufacture of the factory system with virtually no improvement to be made by installing a complete (mufflers, headers and cats) aftermarket system.

Direct bolt on replacement center section with dual 3.5 stainless tips (factory offers dual 3"). The system is made of mandrel bent T304 stainless tubing which is TIG welded and features a proprietary megaphone design to improve sound in the upper RPM range. The system saves over 14 lbs of weight over the stock ( stock gt3) and (5 lbs over GT3RS with Ti muffler), power is up 3-5 hp on average and now the sound is finally worthy of this magnificent engine.

Fits:
Porsche 997 GT3 / GT3RS 2007>>

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606609717

您正在查看的产品与这些编号存在交叉引用关系