后副车架
Silent block set 37% harder than standard for rear axle sub frame. Porsche 996, 997
37% Harder than standard street version.
Fits:
Porsche 997
Porsche 996
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99633105XXS
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
Silent block set for rear axle sub frame. Porsche 996, 997
Standard street version.
Fits:
Porsche 997
Porsche 996
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99633105XXX
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
Silent block set Racing version for rear axle sub frame. Porsche 996, 997
Racing version.
Fits:
Porsche 997
Porsche 996
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99633105XXR
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
Fits:
Porsche 996 / 997
Improved Handling and Precision
Our Rear Subframe Solid Bushing kit improves handling and precision by providing geometry correction for lowered cars and eliminating deflection. Porsche recognizes these performance benefits and uses a similar solid rear subframe mounting approach on the latest GT3 street and Cup racecars.
Replaces stock rubber bushings in the rear subframe of the Porsche 996 and 997 cars, raising the subframe into the chassis 6.5mm (.25 inch).
Geometry Correction
Lowering the 996/997 provides the benefits of lower center of gravity and improved appearance. Unfortunately lowering also causes the rear suspension members to angle down as the inner links drop with the chassis and the outer links remain at wheel upright height. This downward angle harms performance.
With the suspension members angling up towards the wheel the Roll Center is lowered which causes increased chassis lean, toe and camber curves are shifted and become less optimal, static toe and camber adjustments are shifted often exceeding the range of the stock adjusters.
Our kit raises the rear subframe .25 inches (6.5mm) to help reverse the negative effects of lowering. Suspension member angles are improved and performance is enhanced. Our upper bushing fits inside the subframe, eliminating the entire thickness of the upper rubber bushing for the greatest possible geometry correction achievable from bushings alone.
Eliminate Deflection
Stock rubber bushings compress and deform under heavy cornering, braking, and acceleration loads. The compliant rubber bushings allow the entire rear subframe shift about relative to the chassis. Rear camber and toe settings wander along with the subframe making the car less predictable, less stable in turns.
Our solid bushings replace the compliant rubber and do not deform under cornering loads, keeping the subframe in position and alignment true even under heavy cornering loads. The car becomes more predictable and easier to drive fast.
Build Quality
Each bushing consists of two pieces, an upper plug and lower puck. The plug is machined from solid aluminum with knurled edges for perfect fit.
Lower puck is machined from solid steel with zinc finish for protection.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2290035
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
使用性能悬架后副车架衬套改进您的保时捷悬架:技术规格和优点
性能悬架后副车架衬套的技术规格:
- 性能悬架后副车架衬套是保时捷悬架系统中的重要组成部分。
- 它们位于车辆后副车架和底盘之间的连接点处。
- 性能后副车架衬套旨在提高悬架性能、操控性和整体乘坐质量。
- 它们通常由聚氨酯或合成弹性体等高品质材料制成,具有更高的耐用性和耐磨性。
- 性能悬架后副车架衬套可作为保时捷车型的售后升级或标准替换件。
升级或更换保时捷性能悬架后副车架衬套的好处:
改善操纵性和稳定性:性能后副车架衬套可提高刚度并减少弯曲,从而提高转弯、加速和制动时的操纵精度和稳定性。
减少悬架间隙并提高响应能力:升级到性能衬套有助于最大限度地减少悬架系统的间隙或松动,从而在后副车架和底盘之间提供更直接、更灵敏的连接。
增强乘坐质量:性能衬套有助于吸收和隔离振动,减少振动和噪音,并提高整体乘坐舒适度。
提高耐用性:性能后副车架衬套设计用于承受更高的负载,与标准衬套相比,具有更高的耐用性,即使在苛刻的驾驶条件下也能确保持久的性能。
可调节设计的潜力:一些性能衬套具有可调节功能,可以对悬架设置进行微调,并优化对准以改善轮胎磨损和操控特性。
在 Design911,我们专门为您的保时捷提供合适的零件和专业建议。我们提供专为保时捷车型设计的各种高性能悬架后副车架衬套,包括售后升级和 OEM 更换。我们知识渊博的团队可以根据您的保时捷车型、年份和特定的悬架要求帮助您选择合适的后副车架衬套。我们了解实现最佳悬架性能和操控特性的重要性,我们可以指导您选择最适合您需求的衬套。凭借我们的专业知识和对客户满意度的承诺,我们可以帮助您提高保时捷的悬架精度、稳定性和整体驾驶体验。立即联系我们,享受我们的全面支持并获得根据您的要求量身定制的高质量零件。
- 支撑架
- 防侧翻稳定杆
- 运动弹簧
- 前控制臂
- 后控制臂
- 前悬挂连接杆
- 后悬挂连接杆
- 发动机支架
- 变速箱座
- 前侧车顶支架
- 后侧车顶支架
- 转向横拉杆
- 前副车架
- 气动升降系统
- 悬架控制单元
- 防翻架
- Bilstein B4 标准替换件
- Bilstein B4(带 PASM 按钮的车辆)
- Bilstein SPORT B6 减震器
- Bilstein SPORT B6(带 PASM 按钮的车辆)
- Bilstein SPRINT B8 减震器
- Bilstein SPRINT B8(带 PASM 按钮的车辆)
- Bilstein B12 调校悬架套件
- Bilstein B14 PSS 避震悬架套件
- Bilstein B16 PSS9/10 高度减震可调避震悬架套件
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins 道路及赛道悬架
- SuperPro 聚氨酯衬套
- Powerflex 聚氨酯衬套
- Powerflex 黑色系列衬套
- H&R 可调悬架套件
- H&R Cup-Kit 系列运动悬架
- KW 变体 1 Inox 悬架套件
- KW 变体 2 Inox 可调回弹减震悬架
- KW 变体 3 Inox 可调悬架套件
- KW Clubsport 避震悬架套件
- KW Clubsport 避震悬架套件(带车顶支架)
- KW HLS(液压升降系统)
- Eibach Pro-Tronic PASM 拆卸套件
- Sachs 高性能悬架 CSS
- Nitron 汽车系列