冷却液/防冻液

Antifreeze 1Ltr Bottle Concentrate 5 Years protection
1:1 ratio for -36°C protection
1:2 ratio for -20°C protection

Features:
Anti-freeze & Summer Coolant is an ethylene glycol based antifreeze and engine coolant, incorporating the latest in Organic Acid Technology (OAT). It offers winter protection down to -36°C, whilst has been developed to replace BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 278 & MAN 324, MB 325.3, Renault 41-01-001. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 Years.

Benefits:
Provides excellent protection against corrosion
Significantly reduces the likelihood of cavity erosion

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00004330194

您正在查看的产品与这些编号存在交叉引用关系

Coolant / Antifreeze 1Ltr Top-up Bottle - Long Life 5 Year Red



Anti Freeze, please check your vehicle handbook for applications

Mix 50/50 with distilled water for best results.

This product supersedes Porsche's old part numbers:
- 000 043 301 03

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00004330515

您正在查看的产品与这些编号存在交叉引用关系

Coolant / Antifreeze 20Ltr Garage Bottle (Concentrated) - Long Life 5 Year Red

Anti Freeze
Workshop or Garage can containing 20Ltrs.

Meets the performance specifications for the following manufactures.
Audi, Ford, Isuzu, Renault, Jaguar, Mecedes Benz,
Saab, Seat, Skoda, Vauxhall, Volkswagen.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

52377048T

您正在查看的产品与这些编号存在交叉引用关系

Evans Power Cool 180° High Performance Waterless Coolant

Application: For use in all performance car engines primarily fabricated from aluminium, plus some steel and copper components.

Please note: cannot be used with any other coolant

Typical Characteristics:
Physical State : Low Viscosity Synthetic Liquid
Boiling Point : Above 180˚C
Freezing Point : Below -40˚C
Colour : Red Clear
Odour : Almost odourless
Taste : Slightly Sweet, Non-Toxic but not recommended for human consumption

4-Life Durability:
Evans Waterless Engine Coolants have been proven to last >20 years and a million miles in service without the need for replacement.

ASTM & ISO Standards: Evans in association with ASTM committee D15.22 have
developed a specific range of standards for waterless
engine coolants. All Evans Coolants are manufactured in accordance with certified ISO procedural standards.

Health and Safety:
Toxicity : Non-Toxic
Environmental : Bio-degradable
Flammability : Not classed as flammable
Transport : Not classed as hazardous for transport

Benefits over water-based coolants:

Eliminates Overheating: Evans Waterless Coolants have a boiling point above 180°C and will not vaporise, thus eliminating overheating, boil-over and after-boil.

Reduces Pressure: Evans Waterless Coolants generate very low vapour pressures reducing strain on engine hoses and cooling system components.

Prevents Corrosion: Water promotes corrosion via oxidation and electrolysis - Evans Waterless Coolants contain no oxygen and are virtually non-conductive effectively preventing corrosion.

Maximise BHP: Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating - thus increasing combustion efficiency and delivering more power.

Stops Erosion: Evans Waterless Coolants stop cavitation and eliminate liner and cooling pump erosion.

Freeze Protection: Evans Waterless Coolants freeze below -40ºC Non-Toxic Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EPCC180

您正在查看的产品与这些编号存在交叉引用关系

Evans Prep Fluid Waterless Engine Flush for all engine types.

Hygroscopic Engine Flush for: All Engines

Properties: Hygroscopically absorbs water.

When to use: After draining water from the cooling system.

Benefits: Ensures all residual water is removed from the system.

Evans Prep Fluid is formulated to hygroscopically absorb water whilst flushing loose dirt and scale from the cooling system prior to filling with Evans Waterless Coolant.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EPF180

您正在查看的产品与这些编号存在交叉引用关系

WURTH RADIATOR SEAL HP 150ml

High-performance cooling system protection for all modern vehicle types with cross-flow cooling systems.

Features:
Seals leaks up to 0.1 mm near cylinder head seals and hose connections, prevents seal sweating and eliminates evaporation losses.

Application:
To be used for micro-leaks in the cylinder head seal and hose connections and for evaporation loss at units of the cooling system.

Add directly to the cooling circuit when the engine is warm. Add only to the compensating reservoir if coolant is flowing through it. Then allow the engine to run for at least 10 minutes until the thermostat opens and the heater gives off noticeable heat. Then stop the engine, check the coolant again and add more if necessary. The contents of one can are suffcient for 10 liters of coolant.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5861500150

您正在查看的产品与这些编号存在交叉引用关系