Strut Brace

三件式 Racingline 铝制前支撑架。

#德国人#

适合
保时捷 981 Boxster - 2012 年至 2016 年

赛车线
Racingline 是一系列高品质支撑杆的品牌。这些 CNC 铣削螺纹件和激光切割零件可确保极其精确的调整。

Racingline产品有抛光铝或碳纤维涂层两种款式。使用这款支撑杆，您将获得最高水平的技术和光学性能。

支撑架为车身提供额外的稳定性。由于车身扭转力减小，转向更加精确，方向稳定性也得到提高。

Wiechers 支柱支架适用于量产车辆。这些支架尺寸准确，采用优质钢材制成。
我们提供的支撑架由红色钢制成或由高光泽抛光铝制成。

在某些情况下，钢支柱可能会撞击空调系统的加油口

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

36700

您正在查看的产品与这些编号存在交叉引用关系

Ultra Racing Front Lower Bar / Front Member Brace
Specification: 2 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Front Lower Bar / Front Member Brace
Specification: 3 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Front Strut Brace.
Specification: 2 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Front Strut Brace.
Specification: 2 Points



Fits:
Porsche 987 Boxster

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Middle Lower Bar / Middle Member Brace
Specification: 2 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Ultra Racing Rear Lower Bar / Rear Member Brace
Specification: 4 Points



Fits:
Porsche 986 Boxster 2.5L 1996>>

Please note: This product is a special order part and once ordered it cannot be cancelled or returned without our permission.

Rennline Rear Subframe Stabilizer With Tie Downs (Rear).

  

Fits:
Porsche 981 Cayman
Porsche 981 Boxster

Requires trimming of the plastic tray under the 718 and 718 GT4

Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes with the extreme loads being put on them. This negates your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation. Also available as a set including front tie downs, or as just the rear tie down set without the stabilizer bar.

Rennline Rear Subframe Stabilizer With Tie Downs (Rear).

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Most Boxster and Cayman owners who take their cars to the track, have equipped their Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, the 2 piece rear sub frame flexes with the extreme loads being put on them. This negates your car's finely tuned alignment settings, thereby reducing your braking and cornering potential, and increasing tire wear. With this install, your Porsche will handle and brake with greater precision, predictability, and feedback to the driver. Comes with integrated rear tie down brackets and hardware for a 10 minute installation. Also available as a set including front tie downs, or as just the rear tie down set without the stabilizer bar.

Note: Pictures may not show actual product.

Rennline Strut tower brace - 2 point. FRONT.

Fits:
Porsche 986 Boxster 1997-04
Porsche 996 1998-05

One of the easiest and most cost-effective ways to improve your car's handling is the installation of a Rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so Rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. Both the strut bar and brackets are constructed from aircraft grade aluminum, and include stainless steel hardware. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. This strut brace does allow the use of your plastic cowl cover.

Note: Pictures may not show actual product.

Rennline Strut tower brace - 2 point. FRONT.

Fits:
Porsche 997 2005>>
Porsche 987 Boxster 2005>>
Porsche 987 Cayman 2005>>

One of the easiest and most cost-effective ways to improve your car's handling is the installation of a Rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so Rennline has made their braces fully adjustable, allowing you to set a desired amount of pre-stress. Both the strut bar and brackets are constructed from aircraft grade aluminum, and include stainless steel hardware. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately. This strut brace does allow the use of your plastic cowl cover but small alteration would be required.

Please note some cars might require the ends of the brace cut by approx 10mm each side in order to fit the bar on towers. This might be depending on the location of your top mounts.

Note: Pictures may not show actual product.

Fits:
Porsche 996 1997-04 FRONT
Porsche 986 Boxster 1997-04 FRONT



DesignTek Front Strut Braces Finished in light weight but very strong carbon fibre tubing. Chassis stiffening devices adapt to the OEM strut mounts and helps to reduce chassis flex for better cornering and more precise handling on the street or track. This suspension upgrade is a must for any street or track driven car - Increase your driving experience and become one with the road.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

360210986

您正在查看的产品与这些编号存在交叉引用关系

DesignTek Front Strut Braces Finished in light weight but very strong alloy. Chassis stiffening devices adapt to the OEM strut mounts and helps to reduce chassis flex for better cornering and more precise handling on the street or track. This suspension upgrade is a must for any street or track driven. Increase your driving experience and become one with the road.



Fits:
Porsche 997 / 997S
Porsche 987 Boxster
Porsche 987C Cayman