Gearbox Casing / Casing Parts

This conversion was originally designed for mid-engine installations using an AWD 6 speed transmission - but can also be used in rear engine applications.

The end plate is available in two versions, 5 speed G50 or 6 speed 993 and with or without a provision for the shift shaft. This conversion requires either the c4 5 speed or c4 6 speed gear housing to be used in conjunction.

This can be useful for 6 speed AWD to 2 wheel drive conversions, or to replace the no longer available 6 speed 2WD gear housing.

Note: Please specify whether you want with or without shift shaft provision when ordering. The price is the same regardless.

Compatible with housing 964.301.915.05 or 964.301.103.07 from G64/00, G64/01, G64/20, G64/21, G64/51, G64/52

Gasket gearbox casing. 



Fits:
Porsche 911 - 1987 to 1989 (G50 gearbox)
Porsche 911 turbo - 1989 (G50 gearbox)
Porsche 964 Carrera 2 - 1990 to 1994
Porsche 993 C2 / C4 / RS - 1994 to 1997
Porsche 993 turbo - 1994 to 1997

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95030119101

The product you are viewing cross references to these numbers

Gear housing.



Fits:
Porsche 993 1994-98
G50.20/G50.21/G50.31/G50.33/G64.20/G64.21/G64.51

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95030101110

The product you are viewing cross references to these numbers

Allows you to scavenge oil from the side of a G50 5 or 6 speed transmission bell housing using the factory "blank" in the casting.
While some models are machined from the factory, some will need additional machine work. This is a great solution for a G50 car with low ground clearance that needs an oil cooler.

Machined in house from 6061 billet aluminum
Nicely beveled edges; high attention to detail
VDO 300F temp sender included
-8AN adapter included
Mounting hardware included
For all G50's '87-'98 except C4 5 speed
Not for inverted/mid engine gearboxes

G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/20, G50/21, G50/31, G50/32, G50/33, G64/51, G64/52

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95030137100

The product you are viewing cross references to these numbers

Gearbox Ground Strap.



Fits:
Porsche 911 - 1970 to 1989

Porsche 911 turbo - 1975 to 1989
Porsche 964 - 1989 to 1994 Manual Transmission
Porsche 993 - 1994 to 1998 Manual Transmission

Click 'Zoom in' for large parts diagram.
Diagram ref no 40

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99961192020

The product you are viewing cross references to these numbers

Gearbox Ground Strap.



Fits:
Porsche 911 - 1970 to 1989

Porsche 911 turbo - 1975 to 1989
Porsche 964 - 1989 to 1994 Manual Transmission
Porsche 993 - 1994 to 1998 Manual Transmission

Click 'Zoom in' for large parts diagram.
Diagram ref no 40

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99961192020

The product you are viewing cross references to these numbers

Manual transmission main shaft seal. 26.5 x 40 mm



Fits:
Porsche 911 Carrera / Turbo 1987-89
Porsche 964 Carrera / Turbo 1989-94
Porsche 993 Carrera / Turbo 1995-98
Porsche 996 Turbo / GT2 / GT3 2001-05
Porsche 997.1 Turbo / GT2 2007-09
Porsche 997.2 Turbo / GT2 2010-13
Porsche 996 GT3 1999-05
Porsche 997 GT3 2007-11

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911332641

The product you are viewing cross references to these numbers

Manual transmission main shaft seal. 26.5 x 40 mm.



Fits:
Porsche 911 Carrera / Turbo 1987-89
Porsche 964 Carrera / Turbo 1989-94
Porsche 993 Carrera / Turbo 1995-98
Porsche 996 Turbo / GT2 / GT3 2001-05
Porsche 997.1 Turbo / GT2 2007-09
Porsche 997.2 Turbo / GT2 2010-13
Porsche 996 GT3 1999-05
Porsche 997 GT3 2007-11

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911332641

The product you are viewing cross references to these numbers

Parts set for transmission housing PCG30101057.



Fits:
Porsche 993 C2/C4/RS/Turbo with transmission identifier codes G50/20/21/31/32/33 and G64.20/21 (1994 to 1998)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG30101057

The product you are viewing cross references to these numbers

Sealing ring A20x24x1,5 on arresting bush.


Fits:
Porsche 964 (1991 to 1994) on distributor housing with transmission code G64.00/01/02
Porsche 964 (1991 to 1994) on transmission cover with TC G50.03/04/05
Porsche 993 Carrera/RS/4/4S and Turbo (1994 to 1998) on transmission cover with TC G50.20/21/31/33 and TC G64.20/21/51

Click 'Zoom in' for large parts diagram.
Diagram ref no 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90012301040

The product you are viewing cross references to these numbers

Tiptronic Transmission Cover.


Fits:
Porsche 964 1992-94 TIPTRONIC
Porsche 993 1994-98 TIPTRONIC

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

944330091101

The product you are viewing cross references to these numbers

Transmission case for 6-speed manual transmission.



Fits:
Porsche 993 (911) Carrera 2 (1994-1998)
Porsche 993 (911) Carrera 4 (1995-1998)
Porsche 993 (911) RS (1996-1997)
Porsche 993 (911) Turbo (1995-1998)

A gearbox that corresponds to the original part at the time: with the aim of ensuring incomparable original part quality in terms of mechanical processing and surface quality, the gearbox for the Porsche 993 was re-launched by Porsche Classic.

The die-casting process used in this context - as in the series production at the time - provides a very fine and smooth surface. In addition to the original appearance, another advantage of this surface quality is its particularly good resistance to dirt and corrosion. For an optimal fit and tightness, the housing halves were machined using drilling and milling with the highest precision. The aluminum alloy used is a new material specification that was approved by the Porsche development center in Weissach.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96430101057

The product you are viewing cross references to these numbers

Transmission cover. FRONT.



Fits:
Porsche 993 Carrera (1994 to 1998; with transmission code G50.20/21 and G50.31/33)

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96430130104

The product you are viewing cross references to these numbers

Replacement upper retaining bracket for G50 gearbox. 



Fits:
Porsche 911 1987-89 - x2 required per vehicle.
Porsche 964 1989-94 - x1 required per vehicle.
Porsche 993 1994-98 - x1 required per vehicle.

*Please be advised, this part is for manual gearboxes only.