Dashboard Parts

Rennline Billet Dash Knobs - Fog Lights.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Headlights.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Rear Defrost.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Rear Foglight.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Trunk/Gas Pull.

Fits:
Porsche 911/912
Porsche 964
Porsche 993

Please note: Porsche on some models made this knob in a different size. Please measure your thread prior to purchase. This knob is a M6x1.0 thread, some 911's came with a M5x.08 if this is the case in your car please purchase the DA91 instead

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Window Wiper.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Billet HVAC control panel.



Fits:
Porsche 65-89 911/912/930

The Rennline HVAC control panel is CNC milled from a billet aluminum block and anodized for a classic and elegant dash upgrade. Whether you're trying to clean up the dash on your early 911, or backdating the dash on your G-body car, these HVAC controls are sure to do the job. Featuring simplified markings and updated micro LED indicators, the unit pairs very well with our I12 Billet HVAC Knobs (not included but available separately). OEM plastic units are prone to scratching and fading, while these units are proven to stand the test of time. Installs easily to factory control mechanism.

Note: If installing in a 74-89 car, the dash must be backdated as these controls are smaller than the later controls.

Rennline dash backdate kit.



Fits:

Porsche 911/912/930 1969-89

If you have a '69-'89 911/912/930 chances are the lower dashboard is looking pretty rough. Typically, the foam padding is peeling away at the corners, the Radio/HVAC openings are sagging, the plastic bits and pieces are fading, the glovebox door is misaligned, and the list goes on. We've seen countless restorations and resto-mods that are absolutely flawless until you sit in the car and are faced with that gloomy factory dash. This is an area that really bothered us in our own restorations, so we finally developed a solution… The Rennline Dash Backdate Kit.



The Rennline Dash Backdate kit is a fascia that installs in place of all that OEM ugliness. It does away with the original foam padding, the glovebox door, the seatbelt warning light, and all the other non-necessities. In their place is a beautiful fascia that incorporates a polished extrusion similar to that of the early 911's but in one full length rather than the broken-up sections. Also reminiscent of the early 911's are the extrusion inserts which are available in a number of different options from carbon fiber or basketweave to walnut or stainless steel. This may very well be the final piece of your restoration/resto-mod puzzle. *Note – You switch locations may differ from photos. Headlight Knob included; other knobs available separately.



This kit includes

· Dash Overlay

· Polished Extrusion and Extrusion End Pieces

· Extrusions Insert (choose your option)

· Billet HVAC Control Panel and Polished Trim

· Billet Ignition Switch Bezel

· Billet Headlight Knob with Backdate Bezel

· Installation Hardware



Installation is relatively straight forward and involves the following steps:

Removing your glovebox and all accessories from the dashboard.
The Rennline Dash Backdate kit comes with provisions for the early HVAC Control, ignition switch, and headlight switch. If you would like to retain other switches, then you would need to drill the necessary holes into the dash overlay.
If you would like installation a radio, there is a perforated punch out in the extrusion. You would just need to cut the hole in the extrusion insert
Install the fascia over the existing dash frame using the supplied self-drilling hardware
Install the extrusion to the fascia using the supplied flat head sheet metal screws
Slide inserts into place
Install extrusions end caps
Install Accessories

Rennline ignition switch bezel. replacement for the plastic version 9116131600170B



Fits:
Porsche 911 1974-89
Porsche 964
Porsche 993

Is your plastic key switch surround faded and scratched up from years of abuse? If so, Rennline has the answer with this beautiful billet aluminium replacement that will last forever and dress up your dash. This surround will also complement our billet aluminium door handles and lock knob sets. Machined out of aircraft grade aluminium and available in silver or black anodized finishes.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I27

The product you are viewing cross references to these numbers

Rennline Radio Block-Off Plate.



Fits:
Porsche 911/912/930 1965 - 1985

If you're one of those enthusiasts who would rather listen to the sweet sound of that flat 6 than the radio, then we have the solution for you. By popular request, we have developed a radio delete plate similar to the one found on the later RS and RS Americas. Installs easily with two retainers and two lock nuts, and powdercoated in a semi-textured black for a clean OEM look.

Rennline Teardrop defrost knob.
Available in red, black and silver.



Compatible with 911/912/930 ('65-'89) or any car with a threaded lever.

Rennline's billet aluminium teardrop defrost knobs are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red, silver or black anodized finishes for a durable, long lasting appearance. Simply unscrew your old knob, and screw our on.

Rosette for ignition starter lock. BLACK.



Fits:
Porsche 911 1974-86
Porsche 964 1989-94
Porsche 993 1994-96

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116131600270B

The product you are viewing cross references to these numbers

Rosette for ignition switch, black.



Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-96

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161316001

The product you are viewing cross references to these numbers

Side air vent cover.



Fits:
Porsche 911 1974-86
Porsche 930 Turbo 1975-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 17 (LEFT) / 18 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155207

The product you are viewing cross references to these numbers