Control Arms Rear
Refine by Car Type
Filter by brand
Rennline Rear Toe, Camber, and Kinematic Control Arms. Porsche 993
Code: S7273741012415
Rear Toe, Camber, and Kinematic Control Arms.
Kit Includes :
(4) Upper Control Arms, (2) Toe Control Arms
Fits:
Porsche 993
If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links:
1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear.
2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest.
Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions. Rennline arms come with all required bolts and machined bushings to get the job done. Rubber Boots not included but available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S7273741012415
The product you are viewing cross references to these numbers
Kit Includes :
(4) Upper Control Arms, (2) Toe Control Arms
Fits:
Porsche 993
If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links:
1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear.
2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest.
Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions. Rennline arms come with all required bolts and machined bushings to get the job done. Rubber Boots not included but available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S7273741012415
99333104300
99333304502
99333304503
99333104700
99333104702
99333104703
99333114700
99333114702
99333114703
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£1,932.00
Now £1,835.40
Orderable 
Adjustable upper control arm kit. Porsche 993 1994 to 1998
Code: 2180035
Adjustable upper control arm kit.
4 pcs in kit - 1 kit required per car
Fits
Porsche 993 - All 1994 - 1998
Adjustable Upper Control Arm set replaces the stock upper wishbone (KT) and camber arms.
Adjustable length makes it easy to achieve aggressive camber settings.
These have spherical bearings in place of the compliant factory rubber bushings for increased precision and control. The bearings are fully weather sealed to keep out dirt, water and contaminants that wear out unprotected bearings.
Machined from aluminum billet, the are arms are attractive and sturdy.
Sold as a set of 4 and includes 2 each KT and camber arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180035
The product you are viewing cross references to these numbers
4 pcs in kit - 1 kit required per car
Fits
Porsche 993 - All 1994 - 1998
Adjustable Upper Control Arm set replaces the stock upper wishbone (KT) and camber arms.
Adjustable length makes it easy to achieve aggressive camber settings.
These have spherical bearings in place of the compliant factory rubber bushings for increased precision and control. The bearings are fully weather sealed to keep out dirt, water and contaminants that wear out unprotected bearings.
Machined from aluminum billet, the are arms are attractive and sturdy.
Sold as a set of 4 and includes 2 each KT and camber arms
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180035
2180035
99333104502
99333104503
99333104570
99333104580
99333104703
99333104700
99333104702
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£1,650.00
Now £1,617.00
Orderable
Eccentric bolt adjuster locking kit. Porsche 993
Code: 2180019
Eccentric adjuster locking kit.
6pcs in kit - 1 kit required per car
Fits
Porsche 993 - All
Prevent Alignment Settings From Slipping
Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.
Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.
Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.
Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.
Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.
The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180019
The product you are viewing cross references to these numbers
6pcs in kit - 1 kit required per car
Fits
Porsche 993 - All
Prevent Alignment Settings From Slipping
Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.
Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.
Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.
Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.
Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.
The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2180019
2180019
99333121700
99733121702
PAF007648
99633121900
99333121980
99333121981
99333121701
99333121901
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£150.00
Now £147.00
Orderable
Eccentric lock kit. Porsche 993 / 986 / 987 / 996 / 997
Code: S40
Eccentric lock kit. Porsche 993 / 986 / 987 / 996 / 997
Fits:
Porsche 986 Boxster
Porsche 987 Boxster / Cayman
Porsche 993
Porsche 996
Porsche 997
Product Description
Rennline's Eccentric lock kits replaces the factory Eccentric adjustment system which are commonly known to cause loss of alignment during track use. These locks allow you to securely anchor the subframe side of your adjustable links, and ensures that your alignment does not change under heavy load.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S40
The product you are viewing cross references to these numbers
Fits:
Porsche 986 Boxster
Porsche 987 Boxster / Cayman
Porsche 993
Porsche 996
Porsche 997
Product Description
Rennline's Eccentric lock kits replaces the factory Eccentric adjustment system which are commonly known to cause loss of alignment during track use. These locks allow you to securely anchor the subframe side of your adjustable links, and ensures that your alignment does not change under heavy load.
Sold as a pair this includes 2 bolts, 2 lock nuts, 4 washers and 4 eccentric locks.
993 - Can be used on upper control arms, and lower toe arms.
996/997/986/987 - Can be used on lower control arms and lower toe arms.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S40
99333121901
99633121900
99633121703
99733121702
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
£85.90
Now £84.18
Arriving soon
Mono ball track rear control arm bushing. Porsche 993
Code: 99333104301/3
Mono ball track rear control arm bushing.
Price is SET OF 8
Fits:
Porsche 993 1995-98 all REAR
Rear Monoball bushings feature Precision Teflon-lined bearings to increase the performance of your suspension setup. Track Rods are one of the most critical pieces of a 993 rear suspension as these rods locate the rear spindle assembly. This means a worn bushing can not only cause an even twitchier rear end, but they can negatively affect camber and caster throughout the suspension's range of motion. These are a great solution on your street or track car so you can enjoy knowing your alignment settings will stay true even under heavy load and use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99333104301
The product you are viewing cross references to these numbers
Price is SET OF 8
Fits:
Porsche 993 1995-98 all REAR
Rear Monoball bushings feature Precision Teflon-lined bearings to increase the performance of your suspension setup. Track Rods are one of the most critical pieces of a 993 rear suspension as these rods locate the rear spindle assembly. This means a worn bushing can not only cause an even twitchier rear end, but they can negatively affect camber and caster throughout the suspension's range of motion. These are a great solution on your street or track car so you can enjoy knowing your alignment settings will stay true even under heavy load and use.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99333104301
99333104301
99333104503
99333104703
99333104101
99333104102
99333104201
99333104202
99333104181
99333104281
99333104700
99333104702
99333114700
99333114702
99333114703
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£602.56
Now £584.48
Orderable
Powerflex Rear Lower Wishbone Inner Rear Bush. Porsche 993 Powerflex Black Series
Code: PFR57-912BLK
Powerflex Black Series Rear Lower Wishbone Inner Rear Bush.
Sold as a pair (both arms)
This part replaces OEM part number: 99333104101.
Fits:
Porsche 993 1993-95
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-912BLK
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
This part replaces OEM part number: 99333104101.
Fits:
Porsche 993 1993-95
POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-912BLK
PFR57-912
PFR57912
PFR57912BLk
99333104101
99333104102
99333104181
99333104281
99333104201
99333104202
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£58.90
Now £57.72
Orderable
Powerflex Rear Upper Arm Front Inner Bush. Porsche 993
Code: PFR57-910
Powerflex Rear Upper Arm Front Inner Bush.
Sold as a pair (both arms)
This part replaces OEM part number: 99333104502.
Fits:
Porsche 993 1993-95
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-910
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
This part replaces OEM part number: 99333104502.
Fits:
Porsche 993 1993-95
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-910
PFR57-910
PFR57910
99333104502
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£64.90
Now £63.60
In stock
Powerflex Rear Upper Front Arm Inner Bush. Porsche 993 Powerflex Black Series
Code: PFR57-910BLK
Powerflex Black Series Rear Upper Front Arm Inner Bush.
Sold as a pair (both arms)
This part replaces OEM part number: 99333104502.
Fits:
Porsche 993 1993-95
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-910BLK
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
This part replaces OEM part number: 99333104502.
Fits:
Porsche 993 1993-95
POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry.
They are designed for the Track, ready to Race and are engineered to be the best.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-910BLK
PFR57-910
PFR57910
PFR57910BLK
99333104502
99333104503
99333104570
99333104580
99333104582
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£64.90
Now £63.60
Orderable
Powerflex Rear Upper Rear Arm Inner Bush. Porsche 993
Code: PFR57-911
Powerflex Rear Upper Rear Arm Inner Bush.
Sold as a pair (both arms)
Fits:
Porsche 993 1993-95
This part replaces OEM part number: 99333104700.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-911
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
Fits:
Porsche 993 1993-95
This part replaces OEM part number: 99333104700.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-911
PFR57-911
PFR57911
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£66.90
Now £65.56
In stock
Powerflex Rear Upper Rear Arm Inner Bush. Porsche 993 Powerflex Black Series
Code: PFR57-911BLK
Powerflex Black Series Rear Upper Rear Arm Inner Bush.
Sold as a pair (both arms)
This part replaces OEM part number: 99333104700.
Fits:
Porsche 993 1993-95
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-911BLK
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
This part replaces OEM part number: 99333104700.
Fits:
Porsche 993 1993-95
POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry.
They are designed for the Track, ready to Race and are engineered to be the best.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-911BLK
PFR57-911
PFR57911
PFR57911BLK
99333104700
99333104703
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£66.90
Now £65.56
Orderable
Rear adjustable drop links standard and sports suspension. Porsche 993
Code: 2271006
Rear adjustable drop links standard and M030 sports suspension.
Sold as a pair - 1 pair req'd per car
✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Direct Bolt-on replacement
Fits:
Porsche 993 Carrera 2
Porsche 993 Carrera 4
Porsche 993 Carrera 2S
Porsche 993 Carrera 4S
Porsches 993 turbo
Standard or Sports Suspension (M030)
The ideal swaybar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight.Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the swaybar for maximum performance.
A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tyres. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first. Preload can be completely eliminated by adjusting drop link length and swaybar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271006
The product you are viewing cross references to these numbers
Sold as a pair - 1 pair req'd per car
✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Direct Bolt-on replacement
Fits:
Porsche 993 Carrera 2
Porsche 993 Carrera 4
Porsche 993 Carrera 2S
Porsche 993 Carrera 4S
Porsches 993 turbo
Standard or Sports Suspension (M030)
The ideal swaybar (anti roll bar) is completely unloaded at static ride height. Stock drops links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight.Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the swaybar for maximum performance.
A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tyres. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first. Preload can be completely eliminated by adjusting drop link length and swaybar performance optimized.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271006
2271006
99333307301
99333307303
99333307302
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
£276.00
Now £270.48
In stock
Rear control arm bushing kit. Porsche 993 Sport Hardness
Code: 2290009
Rear control arm bushing kit.
Price is for kit. 1 kit req'd per car.
Fits:
Porsche 993 1995-98 Sport Hardness
Replaces the rubber bushing on each of the rear 993 lower wishbone, camber control arm, and KT control arm. Each arm has 1 rubber bushing, for a total of 6 bushings per kit… enough to do one car.
Stock-hardness – Restores performance and ride quality to original.
Sport-Hardness – Similar to the 993 RS bushing, sport hardness rubber is about 25% firmer. Deflects less under cornering loads and thereby maintains alignment more precisely.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290009
The product you are viewing cross references to these numbers
Price is for kit. 1 kit req'd per car.
Fits:
Porsche 993 1995-98 Sport Hardness
Replaces the rubber bushing on each of the rear 993 lower wishbone, camber control arm, and KT control arm. Each arm has 1 rubber bushing, for a total of 6 bushings per kit… enough to do one car.
Stock-hardness – Restores performance and ride quality to original.
Sport-Hardness – Similar to the 993 RS bushing, sport hardness rubber is about 25% firmer. Deflects less under cornering loads and thereby maintains alignment more precisely.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290009
2290009
229000
99333104101
99333104102
99333104181
99333104201
99333104202
99333104281
99333104301
99333104300
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£330.00
Now £323.40
In stock
Rear control arm bushing kit. Porsche 993 Stock Hardness
Code: 2290036
Rear control arm bushing kit.
Price is for kit. 1 kit req'd per car.
Fits:
Porsche 993 1995-98 Stock Hardness
Replaces the rubber bushing on each of the rear 993 lower wishbone, camber control arm, and KT control arm. Each arm has 1 rubber bushing, for a total of 6 bushings per kit… enough to do one car.
Stock-hardness – Restores performance and ride quality to original.
Sport-Hardness – Similar to the 993 RS bushing, sport hardness rubber is about 25% firmer. Deflects less under cornering loads and thereby maintains alignment more precisely.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290036
The product you are viewing cross references to these numbers
Price is for kit. 1 kit req'd per car.
Fits:
Porsche 993 1995-98 Stock Hardness
Replaces the rubber bushing on each of the rear 993 lower wishbone, camber control arm, and KT control arm. Each arm has 1 rubber bushing, for a total of 6 bushings per kit… enough to do one car.
Stock-hardness – Restores performance and ride quality to original.
Sport-Hardness – Similar to the 993 RS bushing, sport hardness rubber is about 25% firmer. Deflects less under cornering loads and thereby maintains alignment more precisely.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2290036
2290036
229000
22900
99333104101
99333104102
99333104181
99333104201
99333104202
99333104281
99333104301
99333104300
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£330.00
Now £323.40
In stock
Rear control arm monoball kit. Porsche 993
Code: 2260002
Rear control arm monoball kit. 1 kit, req'd per car.
Ball Joints.
Fits:
Porsche 993 1995-98
Complete kit for the rear 993 control arms. Includes weather-sealed monoball cartridge replacements for the bushings of the control arms and track control arm. Includes 8 cartridges.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260002
The product you are viewing cross references to these numbers
Ball Joints.
Fits:
Porsche 993 1995-98
Complete kit for the rear 993 control arms. Includes weather-sealed monoball cartridge replacements for the bushings of the control arms and track control arm. Includes 8 cartridges.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260002
2260002
99333104700
99333104702
99333104502
99333104503
99333104570
99333104580
99333104582
99333104300
99333104301
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£990.00
Now £970.20
Orderable
Rear ERP Toe Link Adjustable . Porsche 993 - TARETT
Code: 993.005
Rear ERP Toe Link Adjustable. Price is for EACH. Required 2 per car
Fits:
Porsche 993
Replaces OE part number 99333104300
We choose to carry these competition proven ERP 993 toe control arms, in addition to our standard design, because they are simply the best on the market. They are a direct replacement for the factory links, and will improve handling,stability, and increase rear toe adjustability.
A precision Teflon lined spherical rod end replaces the compliant factory rubber bushing for improved suspension response and feedback. The result is improved stability and control.
The two adjusting links have left and right hand threads on each end. Rotating either of the links will increase or decrease the overall length of the arm and adjust toe.
(Two links required per car)
Would require 4 small rubber boots if needed.
Motorsport Product
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
993.005
The product you are viewing cross references to these numbers
Fits:
Porsche 993
Replaces OE part number 99333104300
We choose to carry these competition proven ERP 993 toe control arms, in addition to our standard design, because they are simply the best on the market. They are a direct replacement for the factory links, and will improve handling,stability, and increase rear toe adjustability.
A precision Teflon lined spherical rod end replaces the compliant factory rubber bushing for improved suspension response and feedback. The result is improved stability and control.
The two adjusting links have left and right hand threads on each end. Rotating either of the links will increase or decrease the overall length of the arm and adjust toe.
(Two links required per car)
Would require 4 small rubber boots if needed.
Motorsport Product
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
993.005
993.005
99333104300
99333104301
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£292.00
Now £286.16
Orderable
Rear ERP Upper Control Arm Adjustable . Porsche 993 - TARETT
Code: 993.00
Rear ERP Toe Link Adjustable. Price is for SINGLE arm. Required 2 of EACH per car
Fits:
Porsche 993
Rear Camber Arm - OE part number 99333104703
Rear Kinematic Arm - OE part number 99333104503
Another competition proven ERP 993 control arm design! These are direct replacements for the factory rear upper camber and kinematic links, and will improve handling, stability, and increase adjustability and precision.
A precision Teflon lined spherical rod end replaces the compliant factory rubber bushing for improved suspension response and feedback. The result is improved stability and control.
The two adjusting links have left and right hand threads on each end. Rotating either of the links will increase or decrease the overall length of the arm.
Two of each links are required per car, sold as each.
Would require 4 small rubber boots if needed.
Motorsport Product
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
993.00
The product you are viewing cross references to these numbers
Fits:
Porsche 993
Rear Camber Arm - OE part number 99333104703
Rear Kinematic Arm - OE part number 99333104503
Another competition proven ERP 993 control arm design! These are direct replacements for the factory rear upper camber and kinematic links, and will improve handling, stability, and increase adjustability and precision.
A precision Teflon lined spherical rod end replaces the compliant factory rubber bushing for improved suspension response and feedback. The result is improved stability and control.
The two adjusting links have left and right hand threads on each end. Rotating either of the links will increase or decrease the overall length of the arm.
Two of each links are required per car, sold as each.
Would require 4 small rubber boots if needed.
Motorsport Product
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
993.00
993.003
993.004
99333104703
99333104503
99333114702
99333114700
99333114703
99333104700
99333104702
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Prices from: £222.46
Rear Lower Wishbone Inner Rear Bush. Porsche 993 Powerflex
Code: PFR57-912
Powerflex Rear Lower Wishbone Inner Rear Bush.
Sold as a pair (both arms)
This part replaces OEM part number: 99333104101.
Fits:
Porsche 993 1993-95
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-912
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
This part replaces OEM part number: 99333104101.
Fits:
Porsche 993 1993-95
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-912
PFR57-912
PFR57912
99333104101
99333104102
99333104181
99333104281
99333104201
99333104202
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£58.90
Now £57.72
Orderable
Rear Lower Wishbone Inner Rear Bush. Porsche 993 Powerflex Heritage Collection
Code: PFR57-912H
Powerflex Heritage Collection Rear Lower Wishbone Inner Rear Bush.
Sold as a pair (both arms)
This part replaces OEM part number: 99333104101.
Fits:
Porsche 993 1993-95
Powerflex Heritage Collection. For Modern Day Classics.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-912H
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
This part replaces OEM part number: 99333104101.
Fits:
Porsche 993 1993-95
Powerflex Heritage Collection. For Modern Day Classics.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-912H
PFR57-912
PFR57912
PFR57-912H
99333104202
99333104201
99333104281
99333104181
99333104102
99333104101
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£58.90
Now £57.72
Orderable
Rear toe control arm monoballs. Porsche 993/996/997/986/987/981
Code: 2260014::1
Rear control arm monoball kit. 1 kit, req'd per car.
Ball Joints.
Fits:
Porsche 993 1995-98
Porsche 996 1998-04
Porsche 997 2005-12
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-12
Porsche 981 Boxster 2012-16
Porsche 987C Cayman 2005-12
Porsche 981C Cayman 2014-16
Complete kit for the rear 993, 996/997, Boxster & Cayman toe control arms. Includes weather-sealed monoball cartridge replacements for the bushings of the rear toe control arms (track rod).
Includes 2 cartridges.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260014
The product you are viewing cross references to these numbers
Ball Joints.
Fits:
Porsche 993 1995-98
Porsche 996 1998-04
Porsche 997 2005-12
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-12
Porsche 981 Boxster 2012-16
Porsche 987C Cayman 2005-12
Porsche 981C Cayman 2014-16
Complete kit for the rear 993, 996/997, Boxster & Cayman toe control arms. Includes weather-sealed monoball cartridge replacements for the bushings of the rear toe control arms (track rod).
Includes 2 cartridges.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2260014
2260014
99333104301
9933310430
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
£275.00
Now £269.50
Orderable
Rear Upper Front Arm Inner Bush. Porsche 993 Powerflex Heritage Collection
Code: PFR57-910H
Powerflex Heritage Collection Rear Upper Front Arm Inner Bush.
Sold as a pair (both arms)
This part replaces OEM part number: 99333104502.
Fits:
Porsche 993 1993-95
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-910H
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
This part replaces OEM part number: 99333104502.
Fits:
Porsche 993 1993-95
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-910H
PFR57-910
PFR57910
PFR57-910H
99333104502
99333104503
99333104570
99333104580
99333104582
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£64.90
Now £63.60
Orderable
Rear Upper Rear Arm Inner Bush. Porsche 993 Powerflex Heritage Collection
Code: PFR57-911H
Powerflex Heritage Collection Rear Upper Rear Arm Inner Bush.
Sold as a pair (both arms)
This part replaces OEM part number: 99333104700.
Fits:
Porsche 993 1993-95
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-911H
The product you are viewing cross references to these numbers
Sold as a pair (both arms)
This part replaces OEM part number: 99333104700.
Fits:
Porsche 993 1993-95
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collectors car, whilst retaining the same standard appearance of a rubber bush.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-911H
PFR57-911
PFR57911
99333104700
99333104703
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£66.90
Now £65.56
Orderable
Rennline Rear Camber Control Arm. Porsche 993
Code: S745012
Rennline Rear Camber Control Arm. Two required per car. PRICE IS EACH
Fits:
Porsche 993
Motorsport Product that replaces the original Porsche part No. 99333104700 or 99333104702, 99333104703 Top Front Control Arm (Rear suspension)
If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest.
Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions.
For fitting information about this product Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S745012
The product you are viewing cross references to these numbers
Fits:
Porsche 993
Motorsport Product that replaces the original Porsche part No. 99333104700 or 99333104702, 99333104703 Top Front Control Arm (Rear suspension)
If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest.
Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions.
For fitting information about this product Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S745012
99333104700
99333104702
99333104703
99333114700
99333114702
99333114703
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£322.00
Now £315.56
In stock
Rennline Rear Kinematic Control Arm. Porsche 993
Code: S735012
Rennline Rear kinematic control arm.
Two required per car. PRICE IS EACH.
Fits:
Porsche 993
Motorsport Product that replaces the original Porsche part No. 99333304502, or 99333304503 Top Rear Control Arm.
If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest. Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S735012
The product you are viewing cross references to these numbers
Two required per car. PRICE IS EACH.
Fits:
Porsche 993
Motorsport Product that replaces the original Porsche part No. 99333304502, or 99333304503 Top Rear Control Arm.
If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest. Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions.
For fitting information about this product Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S735012
99333304502
99333304503
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£322.00
Now £315.56
In stock
Rennline Rear toe control arm. Porsche 993
Code: S721041
Rennline Rear toe control arm.
Two required per car. PRICE IS EACH.
Fits:
Porsche 993
Motorsport Product that replaces the original Porsche part No. 993331043, or 99333104300, Lower Rear Control Arm.
If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest.
Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions. Unlike the competitors' product, Rennline arms come with eccentric locks and new hardware so you can completely eliminate the factory setup, which is known to go out of adjustment under hard driving and ruin your car's alignment.
For fitting information about this product Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S721041
The product you are viewing cross references to these numbers
Two required per car. PRICE IS EACH.
Fits:
Porsche 993
Motorsport Product that replaces the original Porsche part No. 993331043, or 99333104300, Lower Rear Control Arm.
If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links: 1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear. 2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest.
Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions. Unlike the competitors' product, Rennline arms come with eccentric locks and new hardware so you can completely eliminate the factory setup, which is known to go out of adjustment under hard driving and ruin your car's alignment.
For fitting information about this product Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S721041
993331043
99333104300
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£322.00
Now £315.56
Orderable
Split bushing removal tool. Porsche 911 / 964 / 993 / 944 / 924 / 968
Code: 2020903
Split bushing removal tool. 1 req'd per lifetime.
Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2020903
The product you are viewing cross references to these numbers
Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms
Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)
It used to be a difficult task
This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.
Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.
Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.
Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.
Combine with bushing installation tools part #2020904 to complete the job.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2020903
2020903
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£150.00
Now £147.00
Orderable
Street rear track rod bushings. Porsche 993
Code: 99333104301/4
Street rear track rod bushings.
Price is EACH. (8 Required if you are changing all the bushes)
Fits:
Porsche 993 1995-98 (all) REAR
Street rear track rod bushings will bring back the OEM feel in your 911 that may have been lost due to worn out bushings. Track Rods are one of the most critical pieces of a 993 rear suspension as these rods locate the rear spindle assembly. This means a worn bushing can not only cause an even twitchier rear end, but they can negatively affect camber and caster changes through the suspension's range of motion.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99333104301
The product you are viewing cross references to these numbers
Price is EACH. (8 Required if you are changing all the bushes)
Fits:
Porsche 993 1995-98 (all) REAR
Street rear track rod bushings will bring back the OEM feel in your 911 that may have been lost due to worn out bushings. Track Rods are one of the most critical pieces of a 993 rear suspension as these rods locate the rear spindle assembly. This means a worn bushing can not only cause an even twitchier rear end, but they can negatively affect camber and caster changes through the suspension's range of motion.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99333104301
99333104301
99333104503
99333104703
99333104101
99333104102
99333104201
99333104202
99333104181
99333104281
99333114700
99333114702
99333114703
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
£59.00
Now £57.23
In stock
DISPLAYING 1 to 26 (of 26 products)
Also found on these pages
About Control Arms Rear
Upgrade Your Porsche Suspension with Adjustable Rear Control Arms: Technical Specifications and Benefits
Technical specifications of Adjustable Rear Control Arms:
- Adjustable rear control arms are suspension components designed to provide precise adjustment of the vehicle's rear suspension geometry.
- They are typically made from high-strength steel or lightweight alloys for durability and performance.
- Adjustable rear control arms feature threaded or eccentric mounts that allow for fine-tuning of camber and toe settings.
- They come in various designs and lengths to fit different Porsche models and suspension setups.
- Adjustable rear control arms are available as upgrade options or standard replacements for Porsche vehicles.
Benefits of upgrading or replacing Adjustable Rear Control Arms for your Porsche:
Enhanced rear suspension geometry: Adjustable rear control arms allow for precise adjustment of camber and toe angles, optimizing the rear suspension geometry for improved handling, stability, and tire wear.
Improved cornering performance: By fine-tuning the rear suspension settings, adjustable control arms can help reduce understeer or oversteer tendencies, enhancing the vehicle's cornering capabilities and overall balance.
Increased traction and grip: Proper alignment of the rear wheels achieved through adjustable control arms ensures optimal tire contact with the road surface, resulting in improved traction, grip, and acceleration.
Minimized tire wear: By maintaining proper rear alignment, adjustable control arms help prevent uneven tire wear and extend the lifespan of your tires, saving you money in the long run.
Customizability and adaptability: Adjustable rear control arms offer the flexibility to adjust the rear suspension settings to suit specific driving preferences, track conditions, or modifications made to the vehicle.
At Design911, we specialize in providing the correct parts and professional advice for your Porsche. We offer a wide range of adjustable rear control arms designed specifically for Porsche models, including both OEM replacements and performance upgrades. Our knowledgeable team is dedicated to helping you find the right control arms for your Porsche, considering factors such as model, year, suspension setup, and desired adjustments. With our expertise and commitment to customer satisfaction, we can guide you in selecting the perfect control arms to enhance your Porsche's suspension performance and handling characteristics. Contact us today to benefit from our comprehensive support and access high-quality parts tailored to your needs.
You may also like
-
Strut Brace
-
Anti Roll Sway Bar
-
Lowering Springs
-
Control Arms Front
-
Drop links Front
-
Drop links Rear
-
Engine mounts
-
Gearbox mounts
-
Top mounts Front
-
Top mounts Rear
-
Steering Track Rods
-
Front Sub frame
-
Rear Sub Frame
-
Air Lift System
-
Roll Cages
-
Bilstein SPORT B6 Dampers
-
Bilstein SPRINT B8 Dampers
-
Bilstein B12 Tuning Suspension Kit
-
Bilstein B14 PSS Coilover Suspension Kits
-
Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit
-
Bilstein B16 DampTronic (PASM)
-
Bilstein EVO SE
-
Ohlins Road & Track Suspension
-
Koni Sports
-
Koni Special Active
-
Superpro Polyurethane Bushes
-
Powerflex Polyurethane Bushes
-
Powerflex Black Series Bushes
-
Powerflex Heritage Collection
-
DesignTek D220 Coilover Suspension Kit
-
H&R Adjustable Suspension Kits
-
H&R Cup-Kit Sport Suspension
-
KW Variant 1 Inox Suspension kits
-
KW Variant 2 Inox Adjustable Rebound Damping Suspension
-
KW Variant 3 Adjustable Suspension kits
-
KW Clubsport Coilover Suspension Kits
-
KW Clubsport Coilover Suspension Kits WITH Top Mounts
-
Sachs Performance Suspension CSS
-
Nitron Automotive Range
Popular Models
-.jpg){kind=link}
-.jpg){kind=link}
