Porsche > 993 (911) (1994-1998) > Suspension Upgrades >

Rear Sub Frame

Refine by Car Type

Eccentric bolt adjuster locking kit. Porsche 993

Code: 2180019

Eccentric adjuster locking kit.
6pcs in kit - 1 kit required per car

elephantracing

Fits
Porsche 993 - All

Prevent Alignment Settings From Slipping

Losing on the track is bad enough, but losing the alignment on the track is even worse. Prevent your eccentric adjuster bolts from slipping under heavy cornering loads with our Eccentric Adjuster Locking Kit.

Complete kit includes four lockout plates. Two plates are used to lock the rear toe adjusters and two plates to lock the camber settings.

Retain convenience and functionality of the eccentric adjuster. The original functionality of the adjuster is completely preserved. The plate can be set in any position.

Retain full range of the adjuster. These lockout plates do not limit adjustment range in any way, maximum toe and negative camber can be achieved with these plates in place.

Works with OEM fixed length arms and our adjustable length control arms as well.The unique design features a slotted hole that counters the slot provided for the adjuster. The plate can be moved up and down to reach any camber or toe setting desirable.

The Locking plates function by increasing the friction that holds the factory eccentric adjusters in place. These plates are guaranteed to prevent any adjuster slip even under aggressive driving conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2180019

2180019

99333121700

99733121702

PAF007648

99633121900

99333121980

99333121981

99333121701

99333121901

The product you are viewing cross references to these numbers

Zoom in (2)

HD Rear subframe bushing (complete set). Porsche 993 (all)

Code: 99333105100/1

HD Rear subframe bushing. racing version
Complete set (4 pcs). 2 sets needed for one car.

oematch

Fits:
Porsche 993 1995-98 all models

Increase rear end stability and extend the life of your alignment with High Density subframe mounts. Factory units can cause rear ends to become more 'twitchy' and nervous, especially under high suspension loads, especially as they begin to fail. These bushings are not only responsible for holding the entire rear subframe to the shell, but for locating it in relation to the body and other suspension components. This means that even if they have not totally fallen apart the stock, soft mounts can often allow the entire rear suspension to shift and realign itself and as a result your entire car. Made from heavy duty high durometer rubber which features a 25% increase in stiffness over OE units, our High Density bushing kit includes the aluminum inner core and outer casement making them a plug and play solution for your 993. Enjoy a more planted rear end and stop living at the alignment shop with this full rear subframe kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99333105100

99333105100

99333105200

99333105280

99333105180

The product you are viewing cross references to these numbers

Zoom in (2)

Rear axle sub frame solid bushing set. Porsche 993

Code: 9P-0193

Adjutable rear axle solid bushing set.
This set allows you to lower the suspension -25mm from the original height.

products

Fits:
Porsche 993

Material:
6082-T6 Aluminium

Click 'Zoom in' for large parts diagram.
Outlined in green on diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P-0193

9P-0193

99333305100

99333105180

99333305200

99333105280

The product you are viewing cross references to these numbers

Zoom in (2)

Rear subframe bushing (complete set). Porsche 993 (all)

Code: 99333105100/2

HD Rear subframe bushing. street version
Complete set (4 pcs). 2 sets needed for one car.

oematch

Fits:
Porsche 993 1995-98 all models

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99333105100

99333105100

99333105200

99333105280

99333105180

The product you are viewing cross references to these numbers

Zoom in (2)

Rear Subframe Mounting Bush. Porsche 993 Powerflex

Code: PFR57-920

Powerflex Rear Subframe Mounting Bush.
Sold as a pack of 4 (both subframes)

This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-920

PFR57-920

PFR57920

99333105100

99333105180

99333105200

99333105280

The product you are viewing cross references to these numbers

Zoom in (2)

Rear Subframe Mounting Bush. Porsche 993 Powerflex Black Series

Code: PFR57-920BLK

Powerflex Black Series Rear Subframe Mounting Bush.
Sold as a pack of 4 (both subframes)

powerflexblk

This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-920BLK

PFR57-920

PFR57920

PFR57920BLK

99333105100

99333105180

99333105200

99333105280

The product you are viewing cross references to these numbers

Zoom in (2)

Rear Subframe Mounting Bush. Porsche 993 Powerflex Heritage Collection

Code: PFR57-920H

Powerflex Heritage Collection Rear Subframe Mounting Bush.
Sold as a pack of 4 (both subframes)

powerflexh

This part fits into sub frame part numbers:
99333105100, 99333105180, 99333105200 & 99333105280.

Fits:
Porsche 993 1993-95

Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-920H

PFR57-920

PFR57920

PFR57-920H

99333105100

99333105180

99333105200

99333105280

The product you are viewing cross references to these numbers

Zoom in (2)

Rear suspension side section bushing kit. Porsche 993 1994 to 1998

Code: 229001

Rear suspension side section bushing kit.
4 pcs in kit - 2 kits required per car

elephantracing

Fits
Porsche 993 - All 1994 - 1998

Replaces the rubber bushings on the rear 993 side panels.

Stock hardness – Restores performance and ride quality to original.

Sport-hardness – Firmer rubber more precisely locates suspension members under load, without the noise and vibration associated with solid metal alternatives.

Each side panel has 4 rubber bushings, for a total of 8 bushings per car.
Each kit includes 4 bushings, order 2 kits per car

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

229001

2290016

2290017

99333105100

99333105200

99333105180

99333105280

The product you are viewing cross references to these numbers

Zoom in (5) Zoom in (5) Zoom in (5) Zoom in (5) Zoom in (5)

Rennline solid rear subframe kit and tilt kit. Porsche 993

Code: SB656676

Rennline solid rear subframe kit and tilt kit.

Fits:
Porsche 993

Factory rubber suspension mounts have a lot of flexibility and cannot withstand the extreme loads applied to them during performance driving conditions. When these mounts flex, all of the suspension geometry changes making the car unstable and unpredictable. A very popular suspension upgrade is to replace these bushings with solid mounts like the ones found on the factory race cars. These kits are machined out of billet aluminum and come with the required hardware to install.

This kit can be purchased as a Solid Sub Frame Mount Kit or as a Solid Sub Frame/Tilt Kit as found on the factory 993GT2 race cars.

For Fitting Instruction please CLICK HERE

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SB656676

99333105100

99333105200

99333105280

99333105180

The product you are viewing cross references to these numbers

Zoom in (3) Zoom in (3) Zoom in (3)

Rennline Solid Rear Subframe Kit. Porsche 993

Code: SB5876

Solid Rear Subframe Bushing Kit.
rennline

Fits:
Porsche 993

Factory rubber suspension mounts have a lot of flexibility and cannot withstand the extreme loads applied to them during performance driving conditions. When these mounts flex, all of the suspension geometry changes making the car unstable and unpredictable. A very popular suspension upgrade is to replace these bushings with solid mounts like the ones found on the factory race cars. These kits are machined out of billet aluminium and come with the required hardware to install.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SB5876

99333105100

99333105200

99333105280

99333105180

The product you are viewing cross references to these numbers

Zoom in (2)

Solid subframe bushing set Rear. Porsche 993

Code: 2290037

Solid subframe bushing set. Precision Handling - REAR
1 kit required per car.

elephantracing

Fits:
Porsche 993 1995-98

Stock rubber bushings compress and deform under heavy cornering, braking, and acceleration loads. The compliant rubber bushings allow the entire rear subframe shift about relative to the chassis. Rear camber and toe settings wander along with the subframe making the car less predictable, less stable in turns.

Our solid bushings replace the compliant rubber and do not deform under cornering loads, keeping the subframe in position and alignment true even under heavy cornering loads. The car becomes more predictable and easier to drive fast.

Corrects Geometry
Raises the subframe by 10mm to improve geometry and camber curve on lowered cars.

Build Quality
Each bushing consists of two pieces… identical upper and lower pucks.

Each piece is precision machined from high-strength aluminium with an anodized finish for protection.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2290037

2290037

99333105100

99333105180

99333105200

99333105280

The product you are viewing cross references to these numbers

DISPLAYING 1 to 11 (of 11 products)

Also found on these pages

About Rear Sub Frame

Improve Your Porsche Suspension with Performance Suspension Rear Sub-Frame Bushes: Technical Specifications and Benefits

Technical specifications of Performance Suspension Rear Sub-Frame Bushes:

Performance suspension rear sub-frame bushes are vital components in the suspension system of a Porsche.
They are located at the connection points between the rear sub-frame and the chassis of the vehicle.
Performance rear sub-frame bushes are designed to enhance suspension performance, handling, and overall ride quality.
They are typically made from high-quality materials such as polyurethane or synthetic elastomers, offering increased durability and resistance to wear.
Performance suspension rear sub-frame bushes are available as aftermarket upgrades or standard replacements for Porsche models.

Benefits of upgrading or replacing Performance Suspension Rear Sub-Frame Bushes for your Porsche:

Improved handling and stability: Performance rear sub-frame bushes offer increased stiffness and reduced flex, resulting in improved handling precision and stability during cornering, acceleration, and braking.

Reduced suspension play and improved responsiveness: Upgrading to performance bushes helps minimize play or sloppiness in the suspension system, providing a more direct and responsive connection between the rear sub-frame and the chassis.

Enhanced ride quality: Performance bushes help absorb and isolate vibrations, reducing harshness and noise, and improving overall ride comfort.

Increased durability: Performance rear sub-frame bushes are designed to withstand higher loads and provide increased durability compared to standard bushes, ensuring long-lasting performance even under demanding driving conditions.

Potential for adjustable designs: Some performance bushes offer adjustable features, allowing for fine-tuning of the suspension setup and optimizing alignment for improved tire wear and handling characteristics.

At Design911, we specialize in providing the correct parts and professional advice for your Porsche. We offer a wide range of performance suspension rear sub-frame bushes specifically designed for Porsche models, including both aftermarket upgrades and OEM replacements. Our knowledgeable team can assist you in selecting the appropriate rear sub-frame bushes based on your Porsche model, year, and specific suspension requirements. We understand the importance of achieving optimal suspension performance and handling characteristics, and we can guide you in choosing the best bushes that suit your needs. With our expertise and commitment to customer satisfaction, we can help you enhance your Porsche's suspension precision, stability, and overall driving experience. Contact us today to benefit from our comprehensive support and access high-quality parts tailored to your requirements.

Enter your VAT number here and click Verify:

Rear Sub Frame

Rear Sub Frame