KW HLS (Hydraulic Lift System)

KW Coilover kit V3 with HLS 2 Hydraulik Liftsystem.



Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012

Lowering FRONT / REAR: 20-45mm / 20-45mm
Adjustment  FRONT / REAR: Thread / Thread
Mounting position hydraulics: FRONT
Damping adjustment:  Rebound and Compression
Damping Material coilover: Stainless steel
Content of delivery: Set (Front + Rear) with HLS 2

KW Hydraulic Lift-System

Make life easy when negotiating obstacles for sporty cars with low ground clearance.

More ground clearance by the push of a button

With the HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm.

KW Hydraulic Lift System

This prevents damage to your aerodynamic components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or without a KW coilover kit, depending on the type of car and the model. If you cannot find your vehicle in our KW HLS product range, our engineers have also developed a universal lift system.

A great solution made by KW

For a wide range of super cars and general everyday cars our HLS is available as an application-specific solution. Included in the delivery are such parts as the hydraulic lines or hydraulic pump adapted to your vehicle, all components will fit perfectly to your sports car. No matter if you want to combine the HLS with your series suspension kit or our KW coilovers which are one of the worlds top aftermarket products, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies of the international automotive industry place their trust in KW coilover kits.

The lift kit "HLS 2" is only installed on the front axle. "HLS 4" allows you to lift the entire vehicle. A hydraulic cylinder is installed between spring plate and springs of each KW strut. The great advantage of the hydraulic system is that driving dynamics are not affected. The delivery content for all HLS lift kit versions include a control unit, which is connected to the vehicles on-board electronics. The vehicle will be automatically lowered at a certain speed to the original level of the KW coilover kit or your series suspension.

- available as complete solution including KW coilovers
- or as a conversion kit
- can be activated from inside the vehicle via an LED
- control button or by an optional remote control
- can be activated while driving (up to 80 km/h)
- fast lifting within 4-5 seconds (HLS 2)
- absolutely corrosion restistant (coated cylinder components made of aluminum)

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35271215

The product you are viewing cross references to these numbers

KW Coilover kit V3 with HLS 4 Hydraulik Liftsystem.



Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012

Lowering FRONT / REAR: 20-45mm / 20-45mm
Adjustment FRONT / REAR: Thread / Thread
Mounting position hydraulics: FRONT + REAR
Damping adjustment: Rebound and Compression Damping
Material coilover: Stainless steel
Content of delivery: Set (FRONT + REAR) with HLS 4

KW Hydraulic Lift-System

Make life easy when negotiating obstacles for sporty cars with low ground clearance.

More ground clearance by the push of a button

With the HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm.

KW Hydraulic Lift System

This prevents damage to your aerodynamic components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or without a KW coilover kit, depending on the type of car and the model. If you cannot find your vehicle in our KW HLS product range, our engineers have also developed a universal lift system.

A great solution made by KW

For a wide range of super cars and general everyday cars our HLS is available as an application-specific solution. Included in the delivery are such parts as the hydraulic lines or hydraulic pump adapted to your vehicle, all components will fit perfectly to your sports car. No matter if you want to combine the HLS with your series suspension kit or our KW coilovers which are one of the worlds top aftermarket products, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies of the international automotive industry place their trust in KW coilover kits.

The lift kit "HLS 2" is only installed on the front axle. "HLS 4" allows you to lift the entire vehicle. A hydraulic cylinder is installed between spring plate and springs of each KW strut. The great advantage of the hydraulic system is that driving dynamics are not affected. The delivery content for all HLS lift kit versions include a control unit, which is connected to the vehicles on-board electronics. The vehicle will be automatically lowered at a certain speed to the original level of the KW coilover kit or your series suspension.

- available as complete solution including KW coilovers
- or as a conversion kit
- can be activated from inside the vehicle via an LED
- control button or by an optional remote control
- can be activated while driving (up to 80 km/h)
- fast lifting within 4-5 seconds (HLS 2)
- absolutely corrosion restistant (coated cylinder components made of aluminum)

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35271415

The product you are viewing cross references to these numbers

HLS conversion kit for cars with KW coilover kit already fitted.



Fits:
Porsche 997 C4 / C4S - Raises 25-45mm


KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271219

The product you are viewing cross references to these numbers

HLS conversion kit for cars with KW coilover kit already fitted.



Fits:
Porsche 997 GT3 - Raises 00-20mm
Porsche 997 GT3 RS - Raises 00-20mm

KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271224

The product you are viewing cross references to these numbers

FRONT HLS conversion kit for cars with KW coilover kit already fitted.



Fits:
Porsche 997 Turbo - Raises 10-30mm


KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.


Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered


• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
- Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions

This product is a special order item allow 24 working days -8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271223

The product you are viewing cross references to these numbers

HLS conversion kit for cars with KW coilover kit already fitted.



Fits
Porsche 997 GT2 09/2007>>

KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

HLS conversion kit for cars with ORIGINAL FACTORY suspension



Fits
Porsche 997 GT3
Porsche 997 GT3 RS


KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.


Version HLS 2
HLS 2 which enables only the front axles to be lifted and lowered


- For vehicles with with little road clearance
- Vehicle specific applications
- Activation of change in height by a small keychain transmitter
avoiding the need to run additional wires through the vehicle
- Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
- Automatically lowering of the vehicle
- With TÜV certificate
- Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions


This product is a special order item allow 24 working days -8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271624

The product you are viewing cross references to these numbers

HLS conversion kit for cars with KW coilover kit already fitted.



Fits
Porsche 997 C2 - Raises 20-45mm

KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271215

The product you are viewing cross references to these numbers

FRONT & REAR HLS conversion kit for cars with KW coilover kit already fitted.



Fits:
Porsche 997 C2
Front = Raises 20-45mm
Rear = Raises 20-45mm


KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.


Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271415

The product you are viewing cross references to these numbers

FRONT & REAR HLS conversion kit for cars with KW coilover kit already fitted.



Fits:
Porsche 997 C4 / C4S
Front = Raises 20-45mm
Rear = Raises 10-40mm


KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.


Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271419

The product you are viewing cross references to these numbers

FRONT & REAR HLS conversion kit for cars with KW coilover kit already fitted.



Fits:
Porsche 997 GT3
Front = Raises 00-20mm
Rear = Raises 00-20mm

Porsche 997 GT3 RS
Front = Raises 00-20mm
Rear = Raises 00-20mm


KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.


Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered


• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

FRONT & REAR HLS conversion kit for cars with KW coilover kit already fitted



Fits:
Porsche 997 Turbo
Front = Raises 10-30mm
Rear = Raises 10-30mm


KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.


Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered


• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.


This product is a special order item allow 24 working days -8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271423

The product you are viewing cross references to these numbers

HLS conversion kit for cars with ORIGINAL FACTORY suspension



Fits:
Porsche 997 GT2 09/2007>>


KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.


Version HLS 4
HLS 4 covers both the front and rear axles of the vehicle

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271828

The product you are viewing cross references to these numbers

HLS conversion kit for cars with ORIGINAL FACTORY suspension



Fits:
Porsche 997 GT3
Porsche 997 GT3 RS


KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.


Version HLS 4
HLS 4 covers both the front and rear axles of the vehicle


• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter
avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271824

The product you are viewing cross references to these numbers