Top mounts Rear

Lift kit spacer set for air suspension 2 inch. 
Set of for Front and Rear suspension



Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

2” lift kit for 955/957 Porsche Cayenne with Air Suspension.

Bullet proof, bolt-in solution for heavy duty off roading, whether it be in sand dunes or rock crawling in extreme environments. To ensure zero failures, we replace the weak OEM strut brackets with bigger, wider and thicker units. 

Sway bars may be removed for additional articulation, or retained with use of our Eurowise Sway Bar Links. OEM sway bar links will not clear the reinforced brackets.

Lift your vehicle the proper way, maintaining ride quality without running your vehicle in “Offroad” mode.

Professional installation recommended. 
Strut bolts MUST be tightened with the suspension loaded.

Disclaimer:
We recommend always driving in “Auto” mode, both on and off road. Driving in “Offroad” with a lift kit can cause long-term damage to the axle joints due to the extreme angles they are subject to in “Offroad” mode. 

To correct this geometry, installation of our Eurowise Subframe Drop Kit is recommended.

Kit Includes:
Front Strut Brackets with Hardware x 4
Rear Cradle Drop Spacers with Hardware x 4
Level Sensor Links with Hardware x 4

Sway bar links come in steel construction with clear zinc finish 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK20

The product you are viewing cross references to these numbers

Lift kit spacer set for air suspension 3 inch. 
Set of for Front and Rear suspension



Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010

Eurowise 3"+ Lift Kit for 955/957 Porsche Cayenne with Air Suspension.

Bullet proof, bolt-in solution for heavy duty offroading, whether it be in sand dunes or rock crawling in extreme environments. To ensure zero failures, we machine our spacers out of solid block 6061 aluminum and replace the weak OEM strut brackets with bigger, wider, and thicker units. 

To achieve 3” of total lift in auto mode, our 3” Air Suspension Lift Kit includes everything from our 2” Air Suspension Lift Kit plus Front Upper Shock Mount Spacers, Front Sway Bar Links, and our 1.5” Subframe Drop Spacer Kit.

On some vehicles, a 3” lift will introduce more positive camber that can be adjusted out with OEM upper control arms. For such applications, we recommend adding our Eurowise Tubular Upper Control Arms.

Professional installation recommended. 

Strut bolts MUST be tightened with the suspension loaded. This is otherwise a direct bolt-on kit that requires only removal of front and rear strut assemblies, and dropping the rear cradle and front subframe.

Disclaimer: 
We recommend always driving in “Auto” mode, both on and off road. Driving in “Offroad” with a lift kit can cause long-term damage to the axle joints due to the extreme angles they are subject to in “Offroad” mode. Eurowise is not responsible for damage to axles that occurs due to driving in modes higher than “auto.” Noise from rear suspension may occur due to worn rear air strut mounting bushings. If you experience such noise, Eurowise can supply shorter bushings to resolve the issue.

Due to the design of the suspension geometry adding additional lift will cause the air strut plastic bellow to touch the spindle at full droop only. If you see contact on the lift with the suspension fully drooped it is normal. 

Note: 
This lift kit will max out the suspension level sensor’s functional range. The highest setting on the air suspension controller will no longer lift it any higher.

Kit Includes:
Front Strut Brackets with Hardware x 4
Level Sensor Links with Hardware x 4
Front Upper Shock Mount Spacers with Hardware x 6
Front Sway Bar Links x 2
1.5" Subframe Drop Kit with Hardware x 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EWOCTQLK02

The product you are viewing cross references to these numbers