Rear Sub Frame
Kit for front and rear subframes
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018
Subframe centering sleeves for the 955/957/958 Cayenne
These sleeves are designed to prevent your subframe from shifting and throwing off alignment while off-roading. When the Volkswagen Audi Group designed the Gen1 chassis, they made the subframe mounting holes larger than the bolt diameter. This is to allow for shifting of the subframe, to adjust caster and camber, but hard driving can introduce unwanted shifts.
Eurowise centering sleeves keep your subframe static by taking up the negative space around the bolt.
Please Note:
A subframe drop is not a replacement for centering sleeves. They are solutions to separate problems.
Subframe centering sleeves can be used in conjunction with Subframe Drop Kits.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORG1001S
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
Orderable 
Designed for use with 2.5” to 3” lift kits
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2018
When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.
Our 1” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues. Used in conjunction with our 2.5” lift kit, a 1” Subframe Drop will result in nearly 0 degrees of axle angle.
Please Note:
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.
A 1” Subframe Drop will decrease overall lift height by 0.5”. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.
Kit Includes:
1” Front Subframe Spacers w/ hardware x 4
1” Rear Subframe Spacers w/ hardware x 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSF1
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
Orderable
Designed for use with 3.5” and more lift kits
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017
When lifting your vehicle the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.
Our 1.5” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues.
This level of Subframe Drop Kit is designed primarily for use in conjunction with our Eurowise, Eurowise+Bilstein, or Eurowise+JRZ coilovers.
Please Note:
If you have Eurowise gas tank skids, you will need to leave the rear mounting point on the subframe attached so the rear portion that bolts to the bracket lines back up easily.
A 1.5” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.
Kit Includes:
1.5” Front Subframe Spacers with hardware x 4
1.5” Rear Subframe Spacers with hardware x 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSF15
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
Orderable
Designed for use with 2.5” steel spring or 2” air suspension lift kits
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017
Our 1/2 inch Subframe Drop Kit is designed to use with our 2.5" steel spring or 2" air suspension lift kit. This is not a mandatory upgrade, however if you plan on doing heavy off-roading or driving in the lifted modes on air suspension vehicles we recommend it
When lifting your vehicle, the angle & length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.
2.5" inches of lift is the maximum lift that Gen 1&2 Cayenne, Touareg, and Q7s can achieve without stressing the OEM CV joints. On some vehicles, especially those with more worn components, 2.5” of lift is enough to cause CV joints to click.
Our ½” Subframe Drop Kit is designed to eliminate CV joint clicking and improve axle geometry, to roughly 5 degrees, for vehicles with a 2.5” lift.
Kit Includes:
½ inch Subframe Spacers with hardware x 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSF5
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
Designed for use with 4” lift kits or more
Fits:
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017
The 2" Subframe Drop Kit is the largest we offer and is designed for use with lift kits of 4” or more.
When lifting your vehicle, the angle and length between your wheel hubs and transmission increases. Our Subframe Drop Kits are designed to correct this change in axle geometry by lowering the subframe.
Our 2” Subframe Drop Kit lowers both front and rear subframes, eliminating lift restrictions due to axle geometry issues, and includes a steering shaft extension. This level of Subframe Drop Kit will bring the axle angle to nearly 5 degrees on 4” lifts.
Please Note:
Eurowise Gas Tank Skid and Transfer Case Skids will not fit with a 2” subframe drop. If you currently have gas tank skids, you can cut the tabs off of each side and weld them on to the opposite sides to make them work.
Exhaust modifications are required. Dropping the rear subframe 2” will cause it to contact your exhaust.
A 2” Subframe Drop will decrease overall lift height. For example, a 2.5” lift kit with a 1” subframe drop will result in 2” of actual lift. A 3” lift kit with a 1” subframe drop will result in 2.5” of actual lift.
Kit Includes:
2” Front Subframe Spacers with hardware x 4
2” Rear Subframe Spacers with hardware x 4
Steel Steering Shaft Extension with hardware x 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EWORSF2
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>
- Porsche Cayenne V6 3.6L Petrol 300Hp
- Porsche Cayenne V6 3.0L Diesel 245HP
- Porsche Cayenne S V6 3.0L Hybrid 380HP
- Porsche Cayenne S V8 4.8L Petrol 400HP
- Porsche Cayenne S V8 4.2L Diesel 382HP
- Porsche Cayenne GTS V8 4.8L Petrol 400HP
- Porsche Cayenne Turbo V8 4.8L Petrol 500HP
- Porsche Cayenne Turbo S V8 4.8L Petrol 550HP
Orderable
Improve Your Porsche Suspension with Performance Suspension Rear Sub-Frame Bushes: Technical Specifications and Benefits
Technical specifications of Performance Suspension Rear Sub-Frame Bushes:
- Performance suspension rear sub-frame bushes are vital components in the suspension system of a Porsche.
- They are located at the connection points between the rear sub-frame and the chassis of the vehicle.
- Performance rear sub-frame bushes are designed to enhance suspension performance, handling, and overall ride quality.
- They are typically made from high-quality materials such as polyurethane or synthetic elastomers, offering increased durability and resistance to wear.
- Performance suspension rear sub-frame bushes are available as aftermarket upgrades or standard replacements for Porsche models.
Benefits of upgrading or replacing Performance Suspension Rear Sub-Frame Bushes for your Porsche:
Improved handling and stability: Performance rear sub-frame bushes offer increased stiffness and reduced flex, resulting in improved handling precision and stability during cornering, acceleration, and braking.
Reduced suspension play and improved responsiveness: Upgrading to performance bushes helps minimize play or sloppiness in the suspension system, providing a more direct and responsive connection between the rear sub-frame and the chassis.
Enhanced ride quality: Performance bushes help absorb and isolate vibrations, reducing harshness and noise, and improving overall ride comfort.
Increased durability: Performance rear sub-frame bushes are designed to withstand higher loads and provide increased durability compared to standard bushes, ensuring long-lasting performance even under demanding driving conditions.
Potential for adjustable designs: Some performance bushes offer adjustable features, allowing for fine-tuning of the suspension setup and optimizing alignment for improved tire wear and handling characteristics.
At Design911, we specialize in providing the correct parts and professional advice for your Porsche. We offer a wide range of performance suspension rear sub-frame bushes specifically designed for Porsche models, including both aftermarket upgrades and OEM replacements. Our knowledgeable team can assist you in selecting the appropriate rear sub-frame bushes based on your Porsche model, year, and specific suspension requirements. We understand the importance of achieving optimal suspension performance and handling characteristics, and we can guide you in choosing the best bushes that suit your needs. With our expertise and commitment to customer satisfaction, we can help you enhance your Porsche's suspension precision, stability, and overall driving experience. Contact us today to benefit from our comprehensive support and access high-quality parts tailored to your requirements.
-
Lowering Springs
-
Control Arms Front
-
Drop links Front
-
Engine mounts
-
Top mounts Front
-
Top mounts Rear
-
Steering Track Rods
-
A-Frame Wishbone
-
Front Sub frame
-
Lowering Links
-
Bilstein B4 Standard Replacement
-
Bilstein B4 (Cars with PASM Button)
-
Bilstein SPORT B6 Dampers
-
Bilstein SPRINT B8 Dampers
-
Bilstein B12 Tuning Suspension Kit
-
Powerflex Polyurethane Bushes
-
H&R Cup-Kit Sport Suspension
-
KW Variant 3 Adjustable Suspension kits
-
KW Clubsport Coilover Suspension Kits WITH Top Mounts
-
Eibach Pro-Tronic PASM Cancellation Kits
-
Arnott Europe Air Suspension Products
-
Dunlop Air Suspension Products
