仪表板零件

Rennline dash backdate kit.



Fits:

Porsche 911/912/930 1969-89

If you have a '69-'89 911/912/930 chances are the lower dashboard is looking pretty rough. Typically, the foam padding is peeling away at the corners, the Radio/HVAC openings are sagging, the plastic bits and pieces are fading, the glovebox door is misaligned, and the list goes on. We've seen countless restorations and resto-mods that are absolutely flawless until you sit in the car and are faced with that gloomy factory dash. This is an area that really bothered us in our own restorations, so we finally developed a solution… The Rennline Dash Backdate Kit.



The Rennline Dash Backdate kit is a fascia that installs in place of all that OEM ugliness. It does away with the original foam padding, the glovebox door, the seatbelt warning light, and all the other non-necessities. In their place is a beautiful fascia that incorporates a polished extrusion similar to that of the early 911's but in one full length rather than the broken-up sections. Also reminiscent of the early 911's are the extrusion inserts which are available in a number of different options from carbon fiber or basketweave to walnut or stainless steel. This may very well be the final piece of your restoration/resto-mod puzzle. *Note – You switch locations may differ from photos. Headlight Knob included; other knobs available separately.



This kit includes

· Dash Overlay

· Polished Extrusion and Extrusion End Pieces

· Extrusions Insert (choose your option)

· Billet HVAC Control Panel and Polished Trim

· Billet Ignition Switch Bezel

· Billet Headlight Knob with Backdate Bezel

· Installation Hardware



Installation is relatively straight forward and involves the following steps:

Removing your glovebox and all accessories from the dashboard.
The Rennline Dash Backdate kit comes with provisions for the early HVAC Control, ignition switch, and headlight switch. If you would like to retain other switches, then you would need to drill the necessary holes into the dash overlay.
If you would like installation a radio, there is a perforated punch out in the extrusion. You would just need to cut the hole in the extrusion insert
Install the fascia over the existing dash frame using the supplied self-drilling hardware
Install the extrusion to the fascia using the supplied flat head sheet metal screws
Slide inserts into place
Install extrusions end caps
Install Accessories

Rennline ignition switch bezel. replacement for the plastic version 9116131600170B



Fits:
Porsche 911 1974-89
Porsche 964
Porsche 993

Is your plastic key switch surround faded and scratched up from years of abuse? If so, Rennline has the answer with this beautiful billet aluminium replacement that will last forever and dress up your dash. This surround will also complement our billet aluminium door handles and lock knob sets. Machined out of aircraft grade aluminium and available in silver or black anodized finishes.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

I27

您正在查看的产品与这些编号存在交叉引用关系

Rennline radio block-off plate.



Fits:
Porsche 911 1985>>
Porsche 964
Porsche 993

Radio and Heater Control block off plates - Until now, removing the center console from your 964/993 was not possible due to the required switches that were mounted in it. Rennline's new radio and heater control block off plates solve that problem. These plates have been specially designed to accept the factory switches installed in the center console of all 964/993 911 85+ cars. Don't have the factory switches? No problem. These plates are also available without switch cutouts so you can install your own switches or gauges. Made from powder coated metal and installs in minutes on cars with the radio or heater controls removed.

Available in 6, 3, and 0 switch configurations.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

I21

您正在查看的产品与这些编号存在交叉引用关系

Rennline Radio Block-Off Plate.



Fits:
Porsche 911/912/930 1965 - 1985

If you're one of those enthusiasts who would rather listen to the sweet sound of that flat 6 than the radio, then we have the solution for you. By popular request, we have developed a radio delete plate similar to the one found on the later RS and RS Americas. Installs easily with two retainers and two lock nuts, and powdercoated in a semi-textured black for a clean OEM look.

Rennline Teardrop defrost knob.
Available in red, black and silver.



Compatible with 911/912/930 ('65-'89) or any car with a threaded lever.

Rennline's billet aluminium teardrop defrost knobs are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red, silver or black anodized finishes for a durable, long lasting appearance. Simply unscrew your old knob, and screw our on.

Rosette for ignition starter lock. BLACK.



Fits:
Porsche 911 1974-86
Porsche 964 1989-94
Porsche 993 1994-96

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9116131600270B

您正在查看的产品与这些编号存在交叉引用关系

Rosette for ignition switch, black.



Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-96

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161316001

您正在查看的产品与这些编号存在交叉引用关系

Rosette in black for the switch of the Headlight leveling system.



Fits:
Porsche 911 1987 to 1989
Porsche 964 1989 to 1994
Each equipped with Headlight leveling system.

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9116133420001C

您正在查看的产品与这些编号存在交叉引用关系

Side air vent cover.



Fits:
Porsche 911 1974-86
Porsche 930 Turbo 1975-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 17 (LEFT) / 18 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91155207

您正在查看的产品与这些编号存在交叉引用关系

Switch cover, Alloy.



Fits:
Porsche 911 3.2-3.3 08/85-07/89
Porsche 964 3.3-3.6 12/88-06/94
Porsche 993 3.6-3.8 10/93-09/97

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911680CS993

您正在查看的产品与这些编号存在交叉引用关系

Switch warning lights.
A warning flasher switch for all Porsche 911 with short wheelbase.
The warning flasher switch has a clear light guide installed and glows white.



Fits:
Porsche 911 1965-68
with short wheelbase

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161362301

您正在查看的产品与这些编号存在交叉引用关系

Trim cover for ignition lock.
20mm inner diameter



Fits:
Porsche 911/912 1965-69
Porsche 911 1970-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161316002

您正在查看的产品与这些编号存在交叉引用关系