Ohlins 道路及赛道悬架

OHLINS Front shock absorber, adjustable.



Fits:
Porsche 911 (F) 1963-1973
Porsche 911 (G) 1973-1989

* Racing product, not for use on public roads

- STX Technology
- Insert for McPherson-strut, original Bilstein 40 mm outer Tube (front),
- Conventional shock absorber (rear),
- Recommended spring torsion bar, in the upper stiffer segment,
- Rebuildable,
- 2 year limited warranty

Historic Rally Porsche 911 (1963-1989)

Based on Öhlins extensive kit system applications for Historic Rally are available. These versions includes the Porsche 911 Historic Rally car.

The front damper is available in a non-adjustable and an adjustable version. The non-adjustable version is based on a 40 mm cylinder tube that fits into the original Porsche McPherson Bilstein outer tube. The piston shaft is 12 mm and has a balanced setting developed for both Tarmac and Gravel. The front adjustable version has a 16 mm piston shaft hollowed with a valve and jet that is externally adjustable. This one adjuster adjusts both compression and rebound with the use of a bleed system and also has a temperature compensating system. It is also fully rebuildable and possible to tailor make settings for.

The rear shock has a 46 mm damping piston used together with a 16 mm piston shaft with compression and rebound adjustable with one external adjuster. This design also has the temperature compensating system and is of course rebuildable and possible to tailor make settings for.

This combination of Öhlins front and rear has already shown top performance in various Historic Rallies. The product is classical Öhlins and therefore completely rebuildable and possible to tailor make settings for.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

POR5L50

您正在查看的产品与这些编号存在交叉引用关系

OHLINS Front shock absorber, nono-adjustable.



Fits:
Porsche 911 (F) 1963-1973
Porsche 911 (G) 1973-1989

* Racing product, not for use on public roads

- STX Technology
- Insert for McPherson-strut, original Bilstein 40 mm outer Tube (front),
- Conventional shock absorber (rear),
- Recommended spring torsion bar, in the upper stiffer segment,
- Rebuildable,
- 2 year limited warranty

Historic Rally Porsche 911 (1963-1989)

Based on Öhlins extensive kit system applications for Historic Rally are available. These versions includes the Porsche 911 Historic Rally car.

The front damper is available in a non-adjustable and an adjustable version. The non-adjustable version is based on a 40 mm cylinder tube that fits into the original Porsche McPherson Bilstein outer tube. The piston shaft is 12 mm and has a balanced setting developed for both Tarmac and Gravel. The front adjustable version has a 16 mm piston shaft hollowed with a valve and jet that is externally adjustable. This one adjuster adjusts both compression and rebound with the use of a bleed system and also has a temperature compensating system. It is also fully rebuildable and possible to tailor make settings for.

The rear shock has a 46 mm damping piston used together with a 16 mm piston shaft with compression and rebound adjustable with one external adjuster. This design also has the temperature compensating system and is of course rebuildable and possible to tailor make settings for.

This combination of Öhlins front and rear has already shown top performance in various Historic Rallies. The product is classical Öhlins and therefore completely rebuildable and possible to tailor make settings for.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

POR5L00

您正在查看的产品与这些编号存在交叉引用关系

OHLINS Rear shock absorber.



Fits:
Porsche 911 (F) 1963-1973
Porsche 911 (G) 1973-1989

* Racing product, not for use on public roads

- STX Technology
- Insert for McPherson-strut, original Bilstein 40 mm outer Tube (front),
- Conventional shock absorber (rear),
- Recommended spring torsion bar, in the upper stiffer segment,
- Rebuildable,
- 2 year limited warranty

Historic Rally Porsche 911 (1963-1989)

Based on Öhlins extensive kit system applications for Historic Rally are available. These versions includes the Porsche 911 Historic Rally car.

The front damper is available in a non-adjustable and an adjustable version. The non-adjustable version is based on a 40 mm cylinder tube that fits into the original Porsche McPherson Bilstein outer tube. The piston shaft is 12 mm and has a balanced setting developed for both Tarmac and Gravel. The front adjustable version has a 16 mm piston shaft hollowed with a valve and jet that is externally adjustable. This one adjuster adjusts both compression and rebound with the use of a bleed system and also has a temperature compensating system. It is also fully rebuildable and possible to tailor make settings for.

The rear shock has a 46 mm damping piston used together with a 16 mm piston shaft with compression and rebound adjustable with one external adjuster. This design also has the temperature compensating system and is of course rebuildable and possible to tailor make settings for.

This combination of Öhlins front and rear has already shown top performance in various Historic Rallies. The product is classical Öhlins and therefore completely rebuildable and possible to tailor make settings for.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

POR6L00

您正在查看的产品与这些编号存在交叉引用关系