Category Archives: Porsche Electrical
Porsche 996 ABS / PSM gauge light appears for no apparent reason.
Porsche 996 ABS / PSM gauge light appears for no apparent reason. Possible Causes: A wheel came off the ground, wheel hop from accelerating quickly at a low speed, or you hit a pothole (Solution: Turn off the car completely, then turn it back on. The ABS/PSM light will clear itself if this was...
Read more >>
Categories: Porsche Electrical, Technical Information, Tips Porsche 996 1998-04
Comments: 0
Electrical
Disconnecting and reconnecting your battery If you’re going to do any work on your car involving the electrical system, disconnect the battery first. To do this, loosen the connector for the negative/ground terminal first, and wiggle the terminal cap off. Use a wire-tie or similar to tie the cable back out of the way. If...
Read more >>
Categories: Porsche Electrical
Comments: 0









