Anti Roll Sway Bar
kits includes only these items
1 x Adjustable Suspension kits Porsche 996 C4/ 996 Turbo Ohlins DFV Technology
1 x Control Arm Bush Rear Porsche 996 / 986 PowerFlex (PFR57-507)
1 x Powerflex Bushes REAR AXLE for Road Use - Porsche 911 (996) 1997-2005 (PFR57-508)
1 x Powerflex Bushes REAR AXLE for Road Use - Porsche 911 (996) 1997-2005 (PFR57-509)
1 x Powerflex Bushes REAR AXLE for Road Use - Porsche 911 (996) 1997-2005 (PFR57-512)
1 x Powerflex Bushes REAR AXLE for Road Use - Porsche 911 (996) 1997-2005 (PFR57-511)
4 x Lower Arm Bush Repair Kit. Porsche 986 / 996 / 987 / 997 / 987C PowerFlex (PFF57-502/3K)
1 x H&R Anti Roll Bar / Sway Bar Kit. Porsche 996 C4/C4S/996T (F 25mm R 24mm) (33462-1)
1 x Front drop link, Set of 2. Porsche 986 / 987 / 981 / 996 / 997 / 991 (360230996F)
1 x Anti roll bar drop link rear CNC alloy. Porsche 996 C2/996 C4/ 996TT (360230996R)
I bought a Porsche 911 996 3.4-litre Carrera back in September 2016. It was in pretty good condition, but after 18 years' use and 55,000 miles, its suspension was well past its best. Also, out of the factory the car was set up with plenty of understeer built in to make it far more benign than any 911 before it. I wanted to make my car not only feel like new, but better than new.
And so a complete suspension overhaul was needed. I decided to go with Ohlins Road and Track coilovers, Powerflex polyurethane bushes and adjustable anti-roll bars and drop links. Please note that in this video all the parts were supplied by the relevant manufacturers free-of-charge for use in the video. However, I selected them based research as to which set-up would be most suited to my needs for the car. Design 911 also did the work free-of-charge, once again I chose to feature them in the video due to their expertise in Porsche parts supply and fitting.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT996C4
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Sold as a pair
Size: 20mm
OEM Part Number: 99633379225
Fits:
Please choose by size
Porsche 997 inc. Turbo
Porsche 996 1997-2005
Porsche 986 Boxster 1997-2004
Porsche 987 Boxster 2005-2012
Porsche 987C Cayman 2005-2012
Click 'Zoom in' for large parts diagram.
Diagram ref No 2.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-510-20BLK
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 GT2 2001-05
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Front Bar: Diameter 24 mm / Rear Bar: Diameter 24 mm
Please note: Front Sway Bar is Solid and Non-Adjustable/ Rear Sway Bar is Solid and 3 Way-Adjustable.
Fits:
Porsche 996 C4
Porsche 996 Turbo
Manufactured from cold-formed, high strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish.
The Anti-Roll-Kit comes complete with bushes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7215-320
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Sold as a pair
OEM Part Number: 99634379212
Note: Please check anti roll bar diameter before ordering.
Fits:
Porsche 986 Boxster 2.5L 1997-99 *M030 FRONT
Porsche 986 Boxster 2.7L 2000>> *M030 FRONT
Porsche 986 Boxster S 3.2L 2000>> **I029 FRONT
Porsche 987 Boxster 2.7L 2005-08 TIPTRONIC **I029 FRONT
Porsche 996 Carrera 1998-05 C2 COUPE TIPTRONIC FRONT
Porsche 996 Carrera 1998-05 C2 COUPE *M030 FRONT
Porsche 996 Carrera 1998-05 CABRIO FRONT
Porsche 996 Carrera 1998-05 TARGA MANUAL FRONT
Porsche 996 Carrera 1998-05 C4 *M030 FRONT
Porsche 996 Carrera 2001-05 C4S FRONT
Porsche 996 Turbo 2001-05 Standard Chassis FRONT
Porsche 997 MKI Carrera 2005-08 C2 MANUAL **I029 FRONT
Porsche 997 MKI Carrera 2005-08 C4 WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 C4S WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 TARGA WITH PASM FRONT
Porsche 997 MKI Turbo 2008-09 FRONT
* M030 - Cars with Sport-type chassis
** I029 - Cars with Standard chassis
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-501-23.5
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
Front & Rear Anti Roll Bar:
- Front - 25mm (adjustable in 3 places)
- Rear - 24mm (adjustable in 2 places)
Fits:
Porsche 996 C4 / C4S 09/1998>>
Porsche 996 Turbo 09/1998>>
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
33462-1
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Anti-Roll Bars (ARB’s) play an important role in a vehicle’s suspension system, helping to reduce body roll by transferring cornering load from one side of a vehicle to the other.
Often mounted to the vehicle’s chassis with rubber bushes, these bushes ensure the bar works as intended. To prevent the anti-roll bar from moving laterally within its mounts when turning, OE manufacturers will either bond the bushes to the bar, add dead-stops to the bar itself, or rely solely on the clamping pressure of the rubber.
But what happens when those bushes wear and need to be replaced? Often anti-roll bars with bonded bushes come as a costly complete assembly, so the alternative is to fit a more cost-effective unbonded polyurethane replacement, like the many we offer.
In most cases, friction from the bush will prevent any side-to-side bar movement. Still, when turning aggressively or cornering at higher speeds, a laterally shifting anti-roll bar decreases the efficiency and effectiveness of the bar, changing the dynamics of your suspension system in unpredictable ways. It also poses the risk of the bar fouling on other areas of the vehicle or suspension system.
Set of 2.
Fits:
Porsche 996 1997-2005
Porsche 997 2004>>
Porsche 986 Boxster 1997-04
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Diagram Ref No 2. fits inside Ref No. 3
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Sold as a pair
Size: 21mm
OEM Part Number: 99633379226
Fits:
Porsche 996 C2/C4/C4S - Please choose by size
Porsche 996 GT2
Porsche 997 C2/C2S/C4/C4S MKI - Please choose by size
Click 'Zoom in' for large parts diagram.
Diagram ref No 2.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-510-21BLK
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 GT2 2001-05
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Set of 2.
Fits:
Porsche 996 1997-2005
Porsche 997 2004>>
Porsche 986 Boxster 1997-04
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Diagram Ref No 2. fits inside Ref No. 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SPF3722-
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
Upgrade Your Porsche Suspension with Anti-Roll Bars: Technical Specifications and Benefits
Technical specifications of Anti-Roll Bars:
- Anti-roll bars, also known as sway bars or stabilizer bars, are suspension components designed to reduce body roll during cornering.
- They are typically made from high-strength steel or lightweight alloys.
- Anti-roll bars consist of a solid or hollow tubular bar that connects the left and right suspension components.
- They come in various sizes and thicknesses, allowing for adjustable stiffness and fine-tuning of the vehicle's handling characteristics.
- Anti-roll bars are available as upgrade options or standard replacements for Porsche models.
Benefits of upgrading or replacing Anti-Roll Bars for your Porsche:
Improved handling: Anti-roll bars reduce body roll, providing enhanced stability and control during cornering, resulting in improved handling and responsiveness.
Enhanced grip: By reducing weight transfer and maintaining better tire contact with the road, anti-roll bars help improve traction and grip, especially in high-speed maneuvers.
Minimized understeer or oversteer: Anti-roll bars allow for fine-tuning of the suspension setup to address specific handling issues, such as excessive understeer (front-end pushing) or oversteer (rear-end sliding).
Increased driver confidence: Upgrading to performance anti-roll bars can provide a more connected and predictable driving experience, inspiring confidence behind the wheel.
Enhanced safety: By reducing body roll and improving stability, anti-roll bars contribute to overall safety by minimizing the risk of rollovers and maintaining better control in emergency situations.
At Design911, we understand the importance of finding the correct parts for your Porsche and providing professional advice to ensure the best results. We offer a wide range of anti-roll bars specifically designed for Porsche models, including OEM replacements and performance upgrades. Our knowledgeable team can assist you in selecting the appropriate anti-roll bar based on your Porsche model, year, and specific requirements. With our expertise and commitment to customer satisfaction, you can trust us to help you enhance your Porsche's suspension performance and handling characteristics. Contact us today for expert assistance and quality products tailored to your needs.
- Strut Brace
- Lowering Springs
- Control Arms Front
- Control Arms Rear
- Drop links Front
- Drop links Rear
- Engine mounts
- Gearbox mounts
- Top mounts Front
- Top mounts Rear
- Steering Track Rods
- Front Sub frame
- Rear Sub Frame
- Air Lift System
- Roll Cages
- DesignTek Coilover Suspension Kit
- Bilstein B4 Standard Replacement
- Bilstein SPORT B6 Dampers
- Bilstein SPRINT B8 Dampers
- Bilstein B14 PSS Coilover Suspension Kits
- Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins Road & Track Suspension
- Koni Special Active
- Superpro Polyurethane Bushes
- Powerflex Polyurethane Bushes
- Powerflex Black Series Bushes
- H&R Adjustable Suspension Kits
- H&R Cup-Kit Sport Suspension
- KW Variant 1 Inox Suspension kits
- KW Variant 2 Inox Adjustable Rebound Damping Suspension
- KW Variant 3 Adjustable Suspension kits
- KW Clubsport Coilover Suspension Kits
- KW Clubsport Coilover Suspension Kits WITH Top Mounts
- Porsche Kits
- Sachs Performance Suspension CSS
- Nitron Automotive Range